Philips HP6433/01 User manual

ENGLISH 4
FRANÇAIS 20
36
49
64
93
108
HP6438/PB,HP6437/PB,HP6436/PB,HP6435/PB, HP6434/PB,HP6433/PB
3
áá««HHôô©©ddGGáá««HHôô©©ddGG

Introduction
C◗With your new Satinxice you can remove
unwanted hairs quickly,easily and effectively.
The combination of the proven epilating disc
system with the newly developed skin cooler
constitutes a revolution in epilation.Thanks to
the natural numbing effect of ice on the skin,
the new Satinxice makes epilation more
comfortable and less painful than ever.
◗The Satinxice is particularly suitable for the
legs.The rapidly rotating epilating discs catch
even the shortest hairs (0.5 millimetres!) and
pull them out by the roots.The hairs that
grow back are soft and downy.So no stubble!
Important
◗Check if the mains voltage indicated on the
appliance corresponds to your local mains
voltage before you connect the appliance.
◗Make sure the appliance does not come into
contact with water.
◗Keep the appliance out of the reach of
children.
◗To prevent damage and injuries,keep the
running appliance away from your hair,
eyebrows,eyelashes,clothes,threads,cords,
brushes etc.
◗If the mains cord of this appliance is damaged,
it must always be replaced by the original
type.
◗Please turn to your Philips dealer or to the
Philips Customer Care Centre in your
country for replacement.
ENGLISH4

Epilation in general
After epilating with the Satinxice,your skin will
stay smooth and hair-free for weeks.As some
women may develop skin irritation and ingrown
hairs,we recommend that you read the text
below carefully.
- Do not use the appliance when the skin to be
epilated is irritated or when you have varicose
veins,pimples,moles (with hairs) or scratches
without consulting your doctor first.When you
have a reduced immune response,e.g.during
pregnancy or if you are suffering from diabetes
mellitus,haemophilia or immunodeficiency,you
might be more susceptible.If any problems
should occur,please contact your doctor as
well.
- Because the appliance pulls the hairs out by the
roots,the skin may be slightly sensitive or
become somewhat red and irritated.This
phenomenon is absolutely normal (especially
when you have just started using the appliance)
and will quickly disappear.As you use the
appliance more often,the skin irritation will
decrease.Moreover,the hairs that grow back
after epilation gradually become softer and
easier to remove.If,however,your skin irritation
has not disappeared within three days,you are
advised to consult your doctor.
- When you epilate for the first time,we advise
you to try the appliance out on an area with
relatively little hair growth.In this way you can
get accustomed to this epilating method.
- Type HP6434/PB only:This appliance has been
ENGLISH 5

extensively tested on the underarm and bikini-
line areas.Some women may develop skin
irritation when they use this appliance to
epilate these parts of their body for the first
time.We advise you to try the appliance out on
a small patch of skin first.
- Regular cleaning and proper maintenance are
essential to guarantee the best results and to
prolong the life of the appliance.
Tips
- Regular massages with a loofah ( types
HP6433/PB,HP6434/PB,HP6435/PB only)may
help prevent ingrown hairs.When the skin
surface is carefully scrubbed with a loofah,fine
hairs will continue to grow without a problem.
Do not scrub immediately before or after
epilating.
- Applying a mild cream or body milk after
epilation will help to reduce any skin irritation
that may develop.
- Hairs are easier to remove after you have taken
a bath or a shower.Make sure your skin is
completely dry when you start to epilate.
- We advise you to epilate in the evening,as this
will allow any skin irritation that may develop to
disappear during the night.
ENGLISH6

Freezing the skin cooler
C1Remove the protective sleeve from the
skin cooler.
C2Put the skin cooler without the protective
sleeve in the freezer cassette and put it in
the freezer or freezing compartment (***)
for at least 6 hours before you start
epilating.
Make sure the outside of the skin cooler is
completely dry before you freeze it.
◗Tip:You can store the skin cooler in the
freezer permanently.
Epilating the legs
Make sure your skin is clean and free of grease
and cream.Do not use cream right before you
start epilating.
C1Slide the frozen skin cooler into the
protective sleeve.
C2Snap the skin cooler onto the appliance.
3Put the plug in the wall socket.
ENGLISH 7

C4Switch the appliance on by selecting the
desired speed.
Speed I:for areas with little hair growth and/or
with bones directly beneath the skin (such as
knees and ankles).
Speed II:for larger areas and/or areas with a
stronger hair growth.
C5Stretch your skin with your free hand to
make the hairs stand upright.
C6Place the appliance on the skin at right
angles,with the cord pointing towards you,
and move it against the direction of hair
growth.
Make sure both the epilating discs and the skin
cooler touch your skin.
Do not press the appliance onto the skin.
C7Be sure to stretch your leg when you
epilate the back of your knee.
C8Switch the appliance off by setting the
speed selector to position O.
ENGLISH8

Armpits and bikini line
Epilating (types HP6434/PB,HP6437/PB,
HP6438/PB only)
The precision cap reduces the number of
epilating discs that are active and stretches the
skin during epilating.It is particularly suitable when
epilating the underarm and bikini-line areas.You
will get the best results when the hairs are not
too long (max.1 cm long).
1Switch the appliance off.
C2Place the precision cap on the appliance.
The precision cap only fits onto the appliance in
one way.
C3Snap the skin cooler in its protective
sleeve onto the appliance.
C4Switch the appliance on by selecting the
desired speed.
We advise you to use speed II.
C5Stretch the skin with your free hand and
place the appliance on the skin at right
angles.
Make sure both the epilating discs and the skin
cooler touch your skin.
ENGLISH 9

6Move the appliance slowly across the skin
against the direction of hair growth.
Shaving (types HP6435/PB,HP6436/PB,
HP6438/PB only)
You can use the shaving head to shave sensitive
parts of the body such as the armpits and the
bikini line.With the shaving head you will obtain a
smooth result in a comfortable and gentle way.
You don't have to use the skin cooler for this
operation.
1Switch the appliance off.
C2Remove the epilating head.
Press the ribbed sections and slide the epilating
head off the appliance in the direction of the
arrow.
C3Snap the shaving head onto the appliance
by pushing it against the direction of the
arrow ('Click').
The shaving head can only be mounted on the
appliance in one way.
C4Switch the appliance on by selecting the
desired speed.
We advise you to use speed I.
C5Place the trimmer and the shaving foil on
your skin and move the appliance slowly
against the direction of hair growth while
pressing it lightly.
ENGLISH10

Exfoliating (types HP6437/PB and
HP6438/PB only)
Use the exfoliating head only on your legs,not on
your armpits or bikini line.
1Make sure the appliance is switched off.
C2Remove the epilating head,press the
ribbed section and slide the exfoliating
head off the appliance in the direction of
the arrow.
3Remove the skin cooler.
C4Slide the exfoliating head onto the
appliance.It only fits onto the appliance in
one way.
5Switch the appliance on.
Choose speed I or II,depending on the required
exfoliating strength.We recommend exfoliating
each leg for 1-3 minutes.
- To obtain a good skin appearance,use the
exfoliating head once or twice a week.
- Don't use any cream,foam,gel or lotion just
before or during the exfoliation.
- Don't use the exfoliating head within two days
after epilation.
- For hygienic reasons,the exfoliating head
should only be used by one person.
- We advise you to exfoliate before going to bed
at night.Any skin irritation that may develop will
diminish overnight.
ENGLISH 11

- After exfoliation,apply a mild cream or body
milk to hydrate the skin and improve its
texture.
Cleaning the appliance
Do not use any corrosive detergents,scouring
pads or cloths,petrol,acetone etc.to clean the
appliance.
C1Switch the appliance off and pull the plug
out of the wall socket.
C2Remove the skin cooler.
C3Slide the protective sleeve off the skin
cooler.
C4Rinse the skin cooler and the protective
sleeve under the tap or clean them with a
moist cloth.
Make sure the outside of the skin cooler is
completely dry before you put it in the freezer or
freezing compartment.
ENGLISH12