Philips Home Cinema Projector User manual

Register your product and get support at
www.philips.com/welcome
EN User manual
1_hts3020-05_en.indd Sec3:11_hts3020-05_en.indd Sec3:1 1/13/2009 9:10:43 AM1/13/2009 9:10:43 AM

2
1_hts3020-05_en.indd Sec3:21_hts3020-05_en.indd Sec3:2 1/13/2009 9:10:44 AM1/13/2009 9:10:44 AM

3
8 Additional Information 29
Update software 29
Care 29
9 Specifications 30
10 Troubleshooting
32
11 Glossary 34
Contents
1 Important 4
Safety and important notice 4
Trademark notice 5
2 Your Home Theater System 6
Feature highlights 6
Product overview 6
3 Connect 9
Place the Home Theater System 9
Connect video cables 9
Connect speakers and subwoofer 10
Connect radio antenna 11
Connect audio cables/other devices 11
Connect power cord 12
4 Get started 13
Insert the remote control batteries 13
Find the correct viewing channel 13
Select menu display language 14
Change speaker settings 14
Select a play source 15
5 Play 16
Play a disc 16
Play video 16
Play music 19
Play photo 20
Play from USB device 21
Play from radio 21
6 Adjust sound 23
Control the volume 23
Select surround sound 23
Select a preset sound 23
7 Adjust settings 24
General setup 24
Audio setup 25
Video setup 26
Preferences 27
Contents English
EN
1_hts3020-05_en.indd Sec1:31_hts3020-05_en.indd Sec1:3 1/13/2009 9:10:44 AM1/13/2009 9:10:44 AM

4
Recycling
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When you see the crossed-out wheeled bin
symbol attached to a product, it means the
product is covered by the European Directive
2002/96/EC:
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products. The correct
disposal of your old product helps prevent
potentially negative consequences for the
environment and human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed of with normal household
waste.
Please inform yourself about the local rules
on the separate collection of batteries. The
correct disposal of batteries helps prevent
potentially negative consequences for the
environment and human health.
1 Important
Safety and important notice
Warning
Risk of overheating! Never install the Home Theater•
System in a confined space. Always leave a space of
at least 4 inches around the Home Theater System
for ventilation. Ensure curtains or other objects
never cover the ventilation slots on the Home
Theater System.
Never place the Home Theater System, remote
•
control or batteries near naked flames or other heat
sources, including direct sunlight.
Only use this Home Theater System indoors.
•
Keep this Home Theater System away from water,
moisture and liquid-filled objects.
Never place this Home Theater System on other
•
electrical equipment.
Keep away from this Home Theater System during
•
lightning storms.
Where the mains plug or an appliance coupler is•
used as the disconnect device, the disconnect device
shall remain readily operable.
Visible and invisible laser radiation when open. Avoid•
exposure to beam.
This product complies with the radio
interference requirements of the European
Community.
This product complies with the requirements
of the following directives and guidelines:
<Radio Interference Directives>
EN
1_hts3020-05_en.indd Sec1:41_hts3020-05_en.indd Sec1:4 1/13/2009 9:10:44 AM1/13/2009 9:10:44 AM

5
DivX, DivX Ultra Certified, and associated
logos are trademarks of DivX, Inc. and are
used under license.
Official DivX® Ultra Certified product.
Plays all versions of DivX ® video (including
DivX ® 6) with enhanced playback of DivX®
media files and the DivX® Media Format.
Plays DivX® video with menus, subtitles and
audio tracks.
Windows Media and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
The USB-IF Logos are trademarks of Universal
Serial Bus Implementers Forum, inc.
ENERGY STAR and the ENERGY STAR mark
are registered U.S. trademarks.
CLASS 1
LASER PRODUCT
Copyright notice
This product incorporates copyright
protection technology that is protected
by method claims of certain U.S. patents
and other intellectual property rights
owned by Macrovision Corporation and
other rights owners. Use of this copyright
protected technology must be authorised
by Macrovision Corporation, and is intended
for home and other limited viewing uses only
unless otherwise authorised by Macrovision
Corporation. Reverse engineering or
disassembly is prohibited.
Mains fuse (UK only)
This Home Theater System is fitted with an
approved moulded plug. Should it become
necessary to replace the mains fuse, this must
be replaced with a fuse of the same value as
indicated on the plug (example 10A).
1 Remove fuse cover and fuse.
2 The replacement fuse must comply with
BS 1362 and have the ASTA approval
mark. If the fuse is lost, contact your
dealer in order to verify the correct type.
3 Refit the fuse cover.
In order to maintain conformity to the EMC
directive, the mains plug on this product must
not be detached from the mains cord cable.
Trademark notice
Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic and the
double-D symbol are trademarks of Dolby
Laboratories.
Important English
EN
1_hts3020-05_en.indd Sec1:51_hts3020-05_en.indd Sec1:5 1/13/2009 9:10:44 AM1/13/2009 9:10:44 AM

6
Region codes
You can play discs with the following region
codes.
DVD region code Countries
Europe
Russia
Product overview
Remote control
n
q
r
s
t
v
w
x
m
a
b
c
d
e
f
g
h
i
j
k
l
p
o
u
2 Your Home
Theater System
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
at www.philips.com/welcome.
Feature highlights
Listen to rich uncompressed multi-channel
surround sound
This Home Theater System supports 5.1
channels of uncompressed audio that delivers
a real-to-life sound experience as if you are
listening to it live.
USB direct
Simply plug your USB device into the USB jack
to play your MP3/WMA/JPEG/DivX files.
Sync the audio output with the video play
Synchronise audio and video by delaying the
audio output if the video signal sent to the TV
is slower than the audio streams.
Screen Fit
View the movie in full screen display on any
TV.
EN
1_hts3020-05_en.indd Sec1:61_hts3020-05_en.indd Sec1:6 1/13/2009 9:10:44 AM1/13/2009 9:10:44 AM

7
j AUDIO SYNC
Selects an audio language or channel•
on a disc.
Press and hold to access the setting•
for audio sync, then press VOL +/- to
set the audio delay time.
k Numeric buttons
Selects an item to play.•
l SUBTITLE
Selects the subtitle language on a•
disc.
m SCREEN FIT
Fits the picture format to the TV•
screen.
n ZOOM
Zooms in or out of the picture.•
o SLEEP
Sets a delay after which the Home•
Theater System switches to standby.
p OK
Confirms an entry or selection.•
q BACK
Returns to a previous screen.•
For DVD, goes to the title menu.•
For VCD version 2.0 or SVCD with•
PBC turned on, returns to the menu
during playback.
r / (Previous/Next)
Skips to the previous or next title,•
chapter or track.
s (Mute)
Mutes or restores audio output.•
t VOL +/-
Increases or decreases volume.•
u SOUND
Selects a predefined sound effect.•
v ANGLE
Displays video from different camera•
angles.
a (Standby-On)
Turns on the Home Theater System•
or switches to standby mode.
b
(Open/Close)
Opens or closes the disc•
compartment.
c Source buttons
• AUDIO SOURCE: Selects an audio
input source.
• RADIO: Switches to FM band.
• USB: Switches to the USB source.
• DISC: Switches to the disc source.
d SETUP
Accesses or exits the setup menu.•
e (Navigation buttons)
Navigates through the menus.•
Press left and right for fast backward•
or forward search.
In radio mode, press up and down to•
tune the radio frequency.
In radio mode, press left or right to•
start auto search.
f INFO
For discs, displays information about•
the current status or the disc.
For slideshows, displays a thumbnail•
view of photo files.
g (Play/Pause)
Starts, pauses or resumes disc play.•
In radio mode, automatically tunes•
radio stations during first-time setup.
h (Stop)
Stops disc play.•
In radio mode, erases the current•
preset radio station.
i SURR (Surround Sound)
Switches to supported surround•
sound or stereo sound.
Your Home Theater System English
EN
1_hts3020-05_en.indd Sec1:71_hts3020-05_en.indd Sec1:7 1/13/2009 9:10:44 AM1/13/2009 9:10:44 AM

8
Main unit
a (Standby-On)
Turns on the Home Theater System•
or switches to standby mode.
b Disc compartment
c
(Open/Close)
Opens or closes the disc•
compartment.
d (Play/Pause)
Starts, pauses or resumes disc play.•
In radio mode, automatically tunes•
radio stations during first-time setup.
e (Stop)
Stops disc play.•
In radio mode, erases the current•
preset radio station.
f SOURCE
Selects a media to play or listen to•
audio from the connected device.
g Display panel
h VOLUME
Increases or decreases volume.•
i (USB)
Connects a USB supported device.•
a b cdef g hi
w REPEAT / PROGRAM
Selects or turns off repeat or shuffle•
mode.
In radio mode, resets the list of•
preset stations: press to manually
reset; press and hold to automatically
reset.
x REPEAT A-B
Marks the section for repeat play or•
turns off repeat mode.
EN
1_hts3020-05_en.indd Sec1:81_hts3020-05_en.indd Sec1:8 1/13/2009 9:10:44 AM1/13/2009 9:10:44 AM

9
1 Place this Home Theater System near the
TV.
2 Place the speakers system at normal
listening ear-level and directly parallel to
the listening area.
3 Place the subwoofer in the corner of the
room or at least 3 feet away from the TV.
Tip
To avoid magnetic interference or unwanted noise,•
never place this Home Theater System too close to
any radiation devices.
Connect video cables
Connect this Home Theater System to TV to
view disc play. Select the best video connection
that the TV can support.
Option 1: Connect to the SCART jack•
(for a standard TV).
Option 2: Connect to the VIDEO jack•
(for a standard TV).
Note
You must connect this Home Theater System•
directly to a TV.
FRONT
RIGHT
FRONT
LEFT
CENTER
REAR
RIGHT
REAR
LEFT
SUBWOOFER
3 Connect
Make the following connections to use your
Home Theater System.
Basic connections:
Video•
Speakers and subwoofer•
Power•
Optional connections:
Radio antenna•
Audio•
Audio from TV•
Audio from digibox/recorder/game•
console
Other devices•
USB device•
Note
Refer to the type plate at the back or bottom of the•
product for identification and supply ratings.
Before you make or change any connections, ensure•
that all the devices are disconnected from the power
outlet.
Place the Home Theater
System
Place the Home Theater System where•
it cannot be pushed, pulled over or
knocked down. Do not place it in an
enclosed cabinet.
Make sure that you have full access to the•
power cord for easy disconnection of the
Home Theater System from the power
supply.
Connect English
EN
1_hts3020-05_en.indd Sec1:91_hts3020-05_en.indd Sec1:9 1/13/2009 9:10:44 AM1/13/2009 9:10:44 AM

10
Note
The video input jack on the TV might be labelled as•
A/V IN, VIDEO IN, COMPOSITE or BASEBAND.
This type of connection provides standard picture
•
quality.
Connect speakers and
subwoofer
1 Connect the speakers and subwoofer to
the matching jacks on the Home Theater
System.
Note
Ensure that the colours of the plugs and jacks are•
matched.
Option 1: Connect to the SCART jack
1 Connect a scart cable (not supplied) to
the SCART TO TV jack on this Home
Theater System and the SCART input
jack on the TV.
Note
Scart connection allows TV’s audio output through•
the speakers. Press AUDIO SOURCE repeatedly
until ‘SCART IN’ is displayed on the display panel.
This type of connection provides good picture
•
quality.
Option 2: Connect to the Video
(CVBS) jack
1 Connect a composite video cable to
the VIDEO jack on this Home Theater
System and the VIDEO input jack on the
TV.
SCART TO TV
SCART
VIDEO
VIDEO IN
EN
1_hts3020-05_en.indd Sec1:101_hts3020-05_en.indd Sec1:10 1/13/2009 9:10:44 AM1/13/2009 9:10:44 AM

11
Connect audio to TV
1 Connect the audio cables (not supplied)
to the AUDIO IN-AUX1 jacks on the
Home Theater System and the AUDIO
output jacks on the TV.
Note
To listen to the audio output from this connection,•
press AUDIO SOURCE repeatedly until ‘AUX1’ is
displayed on the display panel.
Connect audio from cable box/
recorder/game console
AUDIO OUT
AUX 1
AUDIO IN
AUX 2
AUDIO OUT
AUDIO IN
Connect radio antenna
1 Connect the FM antenna to the FM75
jack on this Home Theater System
(for some models, this cable is already
connected).
2 Extend the FM antenna and fix its ends to
the wall.
Tip
For better FM stereo reception, connect to an•
external FM antenna.
Connect audio cables/other
devices
Route the audio from other devices to this
Home Theater System to enjoy audio play with
multi-channel surround capabilities.
FM
(75 Ω)
ANTENNA
Connect English
EN
1_hts3020-05_en.indd Sec1:111_hts3020-05_en.indd Sec1:11 1/13/2009 9:10:45 AM1/13/2009 9:10:45 AM

12
Connect power cord
Warning
Risk of product damage! Ensure that the power•
supply voltage corresponds to the voltage printed
on the back or the underside of the Home Theater
System.
1 Connect the power cord to the socket
when all the required connections are
made.
The Home Theater System is ready to»
be set up for use.
1 Connect the audio cables (not supplied)
to the AUDIO IN-AUX2 jacks on the
Home Theater System and the AUDIO
output jacks on the device.
Note
To listen to the audio output from this connection,•
press AUDIO SOURCE repeatedly until ‘AUX2’ is
displayed on the display panel.
Connect USB device
1 Connect the USB device to USB jack
on this Home Theater System.
Note
This Home Theater System can only play/view MP3,•
WMA, DivX (Ultra) or JPEG files that are stored on
such devices.
Press
• USB to access the content and play the files.
EN
1_hts3020-05_en.indd Sec1:121_hts3020-05_en.indd Sec1:12 1/13/2009 9:10:45 AM1/13/2009 9:10:45 AM

13
Navigate through the menu
1 Point the remote control directly at the
remote sensor on the Home Theater
System and select the desired function.
2 Press the following buttons on the
remote control to navigate through the
on-screen menus.
Button Action
Move up or down
Move left or right
OK Confirm a selection
Enter numbers
Find the correct viewing
channel
1 Press to turn on the Home Theater
System.
2 Press DISC to switch to disc mode.
3 Turn on the TV and switch to the correct
video-in channel in one of the following
ways:
Go to the lowest channel on your•
TV, then press the Channel Down
button until you see the Philips
screen.
Press the• SOURCE button
repeatedly on the remote control of
your TV.
4 Get started
Insert the remote control
batteries
1 On the back of the remote control, slide
the battery cover to remove it.
2 Insert the 2 supplied batteries (AAA). Be
sure the + and - ends of the batteries line
up with the markings inside the case.
3 Slide the cover back into position.
Note
Do not mix batteries (old and new or carbon and•
alkaline, etc.).
Remove batteries if they are exhausted or if the•
remote control is not to be used for a long time.
Batteries contain chemical substances, they should•
be disposed of properly.
Control a play source
1 Press RADIO, USB or DISC button to
select the source you wish to control.
2 Select the desired function (for example
, ).
Get started English
EN
1_hts3020-05_en.indd Sec1:131_hts3020-05_en.indd Sec1:13 1/13/2009 9:10:45 AM1/13/2009 9:10:45 AM

14
Change speaker settings
Ideally, the distance between listening position
and all the speakers should be the same. If not,
change the speaker settings based on their
distance from the listening position to obtain
the best possible surround sound.
1 Press DISC.
2 Press SETUP.
3 Press to select [Audio Setup] in the
menu, then press .
If the speaker setup option is not•
accessible, press twice before you
try the above steps again.
To set the speakers level
1 Select [Speakers Volume] in the menu,
then press .
CD Upsampling
CD Upsampling
Speakers Delay
Speakers Volume
Night Mode
Audio Setup
Speakers Volume Setup
Front Left
Front Right
Center
Subwoofer
Rear Left
Rear Right
0dB
0dB
0dB
0dB
0dB
0dB
Tip
The video-in channel is between the lowest and•
highest channels and may be called FRONT, A/V IN,
VIDEO, HDMI etc. See the TV user manual on how
to select the correct input on the TV.
Select menu display language
1 Press DISC.
2 Press SETUP.
»[General Setup] menu is displayed.
3 Press .
4 Press to select [OSD Language] in
the menu, then press .
The language options are different•
depending on your country or
region. It may not correspond to the
illustration shown here.
5 Press to select a language, then press
OK.
Tip
You can set the default language for DVD disc menu•
(see ‘Adjust settings’ > ‘Preferences’ > [Disc Menu]).
English
DivX(R) VOD Code
Sleep Timer
Display Dim
Disc Lock
General Setup
Italiano
Français
Deutsch
Português
Nederlands
Español
Dansk
Screen Saver
OSD Language
EN
1_hts3020-05_en.indd Sec1:141_hts3020-05_en.indd Sec1:14 1/13/2009 9:10:45 AM1/13/2009 9:10:45 AM

15
Select a play source
On the main unit
Press the• SOURCE button repeatedly to
select: DISC > USB > FM > AUX 1 >
AUX 2 > SCART IN > DISC ...
On the remote control
Press• AUDIO SOURCE repeatedly to
switch to the connected audio source.
Display Device connected to
SCART IN SCART TO TV jack
AUX 1 AUDIO IN-AUX 1 jacks
AUX 2 AUDIO IN-AUX 2 jacks
Press• RADIO to switch to FM band.
Press• USB to switch to USB mode.
Press• DISC to switch to disc mode.
2Press to change the volume level,
then press OK.
The test tone is emitted from the»
speaker.
Repeat the above setting for other•
speakers until all the speakers’
output level sounds equally balance.
To exit the menu, press• SETUP.
To set the output delay time (centre and rear
speakers only)
1 Select [Speakers Delay] in the menu,
then press .
2 Press to set the delay time, then press
OK.
Repeat the above setting for other•
speakers until the sound output from
different speakers reach the listening
position at the same time.
To exit the menu, press• SETUP.
Tip
Set a longer delay time if the centre speaker or rear•
speaker is closer to the listening position than the
front speaker.
Allow 1ms setting for every 1 foot distance between•
the speaker and the listening position.
Speakers Distance Setup
Center
Rear Left
Rear Right
0MS
0MS
0MS
Get started English
EN
1_hts3020-05_en.indd Sec1:151_hts3020-05_en.indd Sec1:15 1/13/2009 9:10:45 AM1/13/2009 9:10:45 AM

16
Play video
Note
For video disc, playback always resumes from the•
point where it was last stopped. To start play from
the beginning, press while the message is displayed.
Control video play
1 Play a title.
2 Use the remote control to control the
title.
Button Action
Starts, pauses or resumes disc
play.
Stops disc play.
Skips to the next title or chapter.
Skips to the beginning of the
current title or chapter. Press
twice to jump to the previous
title or chapter.
/ Searches fast-forward (right)
or fast-backward (left). Press
repeatedly to change the search
speed.
In pause mode, slow motion
backward or forward play.
/ Searches slow-forward (down)
or slow-backward (up). Press
repeatedly to change the search
speed.
For VCD, only slow-forward play
is possible.
Change video play
1 Play a title.
2 Use the remote control to change the
video play.
5 Play
Play a disc
Caution
Never place any objects other than discs into the disc•
compartment.
Never touch the disc optical lens inside the disc•
compartment.
1 Press to open the disc compartment.
2 Insert a disc with its label facing up.
For double-sided discs, load the side•
to play face up.
3 Press to close the disc compartment
and start disc play.
To view disc play, turn on the TV to•
the correct viewing channel for this
Home Theater System.
To stop disc play, press• .
Note
Check the types of discs supported (see•
‘Specifications’ > ‘Playback media’).
If the password entry menu is displayed, enter
•
the password before you can play the locked or
restricted disc.
If you pause or stop a disc for about 15 minutes, the
•
screen saver is activated. To deactivate the screen
saver, press DISC.
After you pause or stop a disc and no buttons are
•
pressed within 30 minutes, this Home Theater
System automatically switches to standby mode.
EN
1_hts3020-05_en.indd Sec1:161_hts3020-05_en.indd Sec1:16 1/13/2009 9:10:46 AM1/13/2009 9:10:46 AM

17
To return to the title menu during•
play, press BACK.
Access VCD menu or preview menu
The PBC (Playback Control) for VCD is
activated by default in the factory. When you
load a VCD, the contents menu is displayed.
1 Press to select a play option, then
press OK to start play.
If PBC is off, it skips the menu and•
starts play from the first title.
To return to the menu during play,•
press BACK (only possible if the
PBC mode is on).
2 Press DISC to preview the contents of
the disc.
To exit the menu, press• DISC.
3 Select a preview play option, then press
OK
[Track Digest]
Plays the first few seconds of each track in a
disc.
[Disc Interval]
Divides the total disc time by six and play the
first few seconds of these intervals.
[Track Interval]
Divides the current track by six and play the
first few seconds of these intervals.
This option is not available in stop mode.
Tip
You can change the PBC setting (see ‘Adjust settings’•
> ‘Preferences’ > [PBC]).
Select Digest Type:
Track Digest
Disc Interval
Track Interval
Button Action
AUDIO
SYNC
Selects an audio language or
channel on a disc.
SUBTITLE Selects the subtitle language on
a disc.
REPEAT Selects or turns off repeat or
shuffle mode.
Repeat options vary depending
on the disc type.
For VCDs, repeat play is only
possible if the PBC mode is
turned off.
ZOOM Zooms in or out of the picture.
To pan through the zoomed
image, press the Navigation
buttons.
INFO Displays the current status or
disc information.
You can change the video
play options here without
interrupting disc play.
SCREEN
FIT
Fits the picture format to the
TV screen.
You can watch the movie in full
screen on TV.
Note
Some operations may not work with some discs. See•
the information accompanying the disc for details.
Access DVD menu
1 Press DISC to access disc main menu.
2 Select a play option, then press OK.
In some menus, press the• Numeric
buttons to input your selection.
Play English
EN
1_hts3020-05_en.indd Sec1:171_hts3020-05_en.indd Sec1:17 1/13/2009 9:10:46 AM1/13/2009 9:10:46 AM

18
Note
Applicable only to discs containing multi-angle•
scenes.
Quick skip play to a specific time
1 During play, press INFO.
The disc status menu is displayed.»
2 Press to view information, then press
OK.
• [TT Time] (title time)
• [Ch Time] (chapter time)
• [Disc Time] (disc time)
• [Track Time] (track time)
3 Press the Numeric buttons to enter the
time where you want to skip to, then
press OK.
Note
The options are different depending on the disc type.•
Play DivX® video
DivX video is a digital media format that
retains high quality despite a high rate of
compression. You can enjoy DivX video on
this DivX® Certified Home Theater System.
1 Insert a disc or USB device that contains
the DivX videos.
2 Press DISC or USB.
A contents menu is displayed.»
3 Select a title to play, then press .
4 Use the remote control to control the
title.
Sync audio output with video play
If the video play is slower than the audio
output (sound does not match with the
pictures), you can delay the audio output to
match the video.
1 Press and hold AUDIO SYNC until
‘AUDIO SYNC XXX’ is displayed. ‘XXX’
denotes the delay time.
2 Within five seconds, press VOL +/- to set
the delay time for audio output.
Note
If the volume control is not used within 5 seconds, it•
resumes normal volume control function.
Repeat play a specific section
1 During play, press REPEAT A-B where
you want to set as the starting point.
2 Press REPEAT A-B again to set the
ending point.
Repeat play starts.»
3 To cancel repeat play, press REPEAT A-B
again.
Note
The marked section for repeat play is only possible•
within a track/title.
View video play from different camera
angles
1 During play, press ANGLE repeatedly to
display the angle options.
Play changes to the selected angle.»
EN
1_hts3020-05_en.indd Sec1:181_hts3020-05_en.indd Sec1:18 1/13/2009 9:10:46 AM1/13/2009 9:10:46 AM

19
Button Action
Starts, pauses or resumes
disc play.
Stops disc play.
Skips to the next track.
Skips to the beginning of
the current track. Press
twice to jump to the
previous track.
Selects an item to play.
/ Searches fast-forward
(right) or fast-backward
(left). Press repeatedly to
change the search speed.
REPEAT Selects or turns off repeat
or shuffle mode.
Play MP3/WMA music
MP3/WMA is a type of highly compressed
audio file (files with .mp3 or .wma extensions).
1 Insert a disc or USB that contains the
MP3/WMA music.
2 Press DISC or USB.
A contents menu is displayed.»
3 Select a folder, then press OK.
4 Select a track to play, then press .
To return to the main menu, press•
BACK or press until ‘Previous’
folder is selected, then press OK.
Button Action
AUDIO
SYNC
Selects an audio language or
channel.
SUBTITLE Select DVD or DivX subtitle
languages.
Stops play.
For DivX Ultra video, press
this button again to display the
contents menu.
INFO Displays DivX Ultra video
information.
Note
You can only play DivX videos that were rented•
or purchased with the DivX registration code of
this Home Theater System (see ‘Adjust settings’ >
‘General setup’ > [DivX(R) VOD Code]) .
You can play DivX video files of up to 4GB.•
If the subtitle does not appear correctly, change the•
character set (see ‘Adjust settings’ > ‘Preferences’ >
[DivX Subtitle]).
This Home Theater System can display up to 45
•
characters in the subtitle.
Play music
Control audio track play
1 Play a track.
2 Use the remote control to control the
track.
Play English
EN
1_hts3020-05_en.indd Sec1:191_hts3020-05_en.indd Sec1:19 1/13/2009 9:10:46 AM1/13/2009 9:10:46 AM

20
To go to previous or next screen•
display, press / .
To select a photo, press the•
Navigation buttons.
To display the selected photo only,•
press OK.
4 Press to start slideshow play.
To return to the menu, press•
BACK.
Note
You may require longer time to display the disc•
content on the TV due to the large number of songs/
photos compiled onto one disc.
If the JPEG photo is not recorded with an ‘exif’ type•
file, the actual thumbnail picture is not shown on the
display. It is replaced by a ‘blue mountain’ thumbnail
picture.
This Home Theater System can only display digital•
camera pictures according to the JPEG-EXIF format,
typically used by almost all digital cameras. It cannot
display Motion JPEG and pictures in formats other
than JPEG, or sound clips associated with pictures.
Folders/files that exceed the supported limit of this•
Home Theater System are not displayed or played.
Control photo play
1 Play photo slideshow.
2 Use the remote control to control the
photo.
Note
For disc recorded in multiple sessions, only the first•
session is played.
This Home Theater System does not support
•
MP3PRO audio format.
If any special characters are present in the MP3 track
•
name (ID3) or album name, it might not be displayed
correctly on the screen because these characters are
not supported.
Some WMA files are protected by Digital Rights•
Management and cannot be played on this Home
Theater System.
Folders/files that exceed the supported limit of
•
this Home Theater System will not be displayed or
played.
Tip
You can select the display of data contents, view•
folders or files (see ‘Adjust settings’ > ‘Preferences’ >
[MP3/JPEG Display]).
Play photo
Play photo as slideshow
This Home Theater System can play JPEG
photos (files with .jpeg or .jpg extensions).
1 Insert a disc or USB that contains the
JPEG photos.
2 Press DISC or USB.
Slideshow begins (for Kodak disc) or»
a contents menu (for JPEG disc) is
displayed.
3 Select the folder/album you want to play.
To preview the photos in the folder/•
album, press INFO.
EN
1_hts3020-05_en.indd Sec1:201_hts3020-05_en.indd Sec1:20 1/13/2009 9:10:46 AM1/13/2009 9:10:46 AM