Philips HTS3164 User manual

FM wire antenna
3Enjoy
What’s in the box?
Start disc playback
APress çto open the disc tray.
BPlace a disc with the disc label facing up.
CPress çto close the disc tray.
DPlayback starts automatically.
EIf the disc menu appears on the TV, use  
keys or the numeric keypad to select an option in
the menu and press OK to start playback.
zTo enjoy the powerful surround sound
from the speakers, press SURROUND
on the remote control to turn on the
multi-channel surround mode.
FPress to stop playback.
Note When you press ubutton,
playback resumes from where it last stopped.
To start playback from the beginning, you
have to press .
Playback other supported
devices
USB device
AInsert your USB device to the USB socket.
BPress USB to switch to ‘USB’ mode.
CPress uto start playback.
DTo stop playback, press DISC to switch to ‘DISC’
mode. You can unplug your USB device now.
Other portable audio player
AUse a 3.5mm stereo audio cable (not supplied) to
connect the headphone output socket on your
portable audio player to MP3 LINK socket.
BPress PLAY on your portable audio player.
CPress AUX (MP3 LINK) repeatedly until ‘MP3
LINK’ is displayed to listen to the playback.
Main Unit
Remote Control
and 2 batteries
User
Manual
1 centre, 2 front, 2 rear speakers
and subwoofer
Need help?
User Manual
See the user manual that came with your Philips DVD Home Theatre System.
2008 CKoninklijke Philips N.V.
All rights reserved.
www.philips.com
Scart Cable
Register your product and get support at
www.philips.com/welcome
Quick Start Guide
Connect
Set up
Enjoy
1
2
3
HTS3164
hts3164_12_qsg_eng4_final_wk752.1 1hts3164_12_qsg_eng4_final_wk752.1 1 2007-12-28 12:57:33 PM2007-12-28 12:57:33 PM

1Connect
A
Placement
Proper speakers system placement is important to
ensure optimum sound performance.
FRONT
RIGHT
SUBWOOFER
FRONT
LEFT
CENTER
REAR
RIGHT
REAR
LEFT
APlace the centre speaker above or close to the TV.
BPlace the subwoofer on the floor, at least one metre
away from the TV.
CPlace the front speakers at equal distances from the
TV.
DPlace the rear speakers at the back or beside the
listening position.
B
Connect the main unit to TV
SCART IN
SCART IN
zConnect a scart cable (supplied) from the SCART
TO TV socket on the main unit to the SCART IN
socket on your TV.
Note It is important to connect the main unit
directly to your TV. When watching the TV
programmes, you can press AUX (MP3 LINK)
repeatedly on the remote control until ‘SCART IN’ is
displayed, to get the sound output from the speakers.
2Set up
C
Connect the speakers and subwoofer
Connect the various coloured plugs from the speakers
and subwoofer to the same coloured sockets at the rear
of the main unit.
A
Finding the viewing channel
APress 2(Standby-On) on the main unit to turn it
on.
BTurn on the TV. Use the TVs remote control to
select the correct viewing channel.
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
control repeatedly (or AV, SELECT, °button) until
you see the Video In channel.
B
Select the display language on the
screen
APress OPTIONS.
The { General Setup } appears.
BPress
.
Press OPTIONS to exit menu
General Setup
Disc Lock
Display Dim
OSD Language
Screen Saver
DivX(R) VOD Code
Sleep
Dansk
Suomi
Français
Deutsch
Italiano
English
Auto
Nederlands
CUse  keys to select { OSD Language } and press
.
DUse  keys to select a language option in the
menu and press OK to confirm.
EPress OPTIONS to exit.
Note The language set here is only for the menus
that are shown on the TV while operating this Home
Theatre system, not for the DVD disc menu.
There are various setup options (Audio Setup, Video
Setup, Preferences) available on this Home Theatre
System. Refer to the user manual for more information.
D
Connect the radio antenna and
power cable
Keep the antennas away from the electronic devices to
prevent unwanted interference.
B
A
AConnect the FM antenna (supplied) to the inner pin
of the FM 75 socket. Extend the wire for
optimum reception.
BConnect the power cable from the main unit to the
AC power outlet.
E
Connect audio output from other
device (optional)
Use a red and white audio cables (not supplied) to
connect the AUDIO IN-AUX sockets on the main unit
to the AUDIO OUT sockets on the connected device
(for example, DVD recorder, VCR, Cable/Satellite Box).
AUDIO
OUT
AUDIO OUT
AUDIO IN
AUX
L
R
AUDIO
OUT
Note Press AUX (MP3 LINK) repeatedly on the
remote control until ‘AUX’ is displayed as the source
you want to listen to.
Main Unit (rear)
Television (rear)
Main Unit (rear)
DVD recorder/ VCR/
Cable/ Satellite Box
Main Unit (rear)
FM antenna
SUBWOOFER
FRONT
RIGHT
FRONT
LEFT
REAR
RIGHT
REAR
LEFT
FRONT CENTER
Main Unit (rear)
Main Unit (Front)
Standby button
hts3164_12_qsg_eng4_final_wk752.2 2hts3164_12_qsg_eng4_final_wk752.2 2 2007-12-28 12:57:36 PM2007-12-28 12:57:36 PM