1Connect
A
Placement
Proper speakers system placement is important to
ensure optimum sound performance.
FRONT
RIGHT
SUBWOOFER
FRONT
LEFT
CENTER
REAR
RIGHT
REAR
LEFT
APlace the centre speaker above or close to the TV.
BPlace the subwoofer on the floor, at least one metre
away from the TV.
CPlace the front speakers at equal distances from the
TV.
DPlace the rear speakers at the back or beside the
listening position.
B
Connect the main unit to TV
zUse the supplied composite video cable to connect
the CVBS socket on the main unit to the VIDEO IN
socket on your TV.
Note If your TV supports HDMI, connect this unit
to your TV using HDMI connection for better picture
quality. See the accompanying user manual for more
information.
2Set up
C
Connect the speakers and subwoofer
Connect the various coloured plugs from the speakers
and subwoofer to the same coloured sockets at the rear
of the main unit.
A
Finding the viewing channel
APress 2(Standby-On) on the main unit to turn it
on.
BTurn on the TV. Use the TVs remote control to
select the correct viewing channel.
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
control repeatedly (or AV, SELECT, °button) until
you see the Video In channel.
B
Select the display language on the
screen
APress OPTIONS.
The { General Setup } appears.
BPress
.
Press OPTIONS to exit menu
General Setup
Disc Lock
Display Dim
OSD Language
Screen Saver
DivX(R) VOD Code
Sleep
Español
English
Auto
Brazil Por
CUse keys to select { OSD Language } and press
.
DUse keys to select a language option in the
menu and press OK to confirm.
EPress OPTIONS to exit.
Note The language set here is only for the menus
that are shown on the TV while operating this Home
Theatre system, not for the DVD disc menu.
There are various setup options (Audio Setup, Video
Setup, Preferences) available on this Home Theatre
System. Refer to the user manual for more information.
D
Connect the radio antennas and
power cable
Keep the antennas away from the electronic devices to
prevent unwanted interference.
AConnect the FM antenna (supplied) to the inner pin
of the FM 75 socket. (For some models, it has
been connected in the factory.) Extend the wire for
optimum reception.
BUnfold the AM/MW loop antenna (supplied) and fix
the claw into the slot.
CPress on the AM/MW tabs and insert the wires into
the sockets.
DConnect the power cable from the main unit to the
AC power outlet.
E
Connect audio output from TV
(optional)
To hear the TV audio through this unit, use a red and
white audio cables (not supplied) to connect the AUDIO
IN-AUX sockets on the main unit to the AUDIO OUT
sockets on your TV.
Note When watching the TV programs, you can
press AUX (MP3 LINK) repeatedly on the remote
control until ‘AUX 1’ or ‘AUX 2’ is displayed to get the
sound output from the speakers.
Main Unit (rear)
Television (rear)
Main Unit (rear)
Main Unit (rear)
FM antenna
SUBWOOFER
FRONT
RIGHT
FRONT
LEFT
REAR
RIGHT
REAR
LEFT
FRONT CENTER
Main Unit (rear)
Main Unit (Front)
Standby button
TV (rear)
AM/MW antenna
hts3365_55-77-78_qsg_eng3_final82 2hts3365_55-77-78_qsg_eng3_final82 2 2008-02-13 11:07:50 AM2008-02-13 11:07:50 AM
