Philips HTS6520 User manual

Register your product and get support at
www.philips.com/welcome
EN User manual 3
ES Manual del usuario 3
PT-BR Manual do Usuário 3
HTS6520

“Evite o uso prolongado do aparelho
com volume superior a 85 decibéis pois
isto poderá prejudicar a sua audição.”
Nível de Exemplos
Decibéis
30 Biblioteca silenciosa,
sussurros leves
40 Sala de estar, refrigerador,
quarto longe do trânsito
50 Trânsito leve, conversação
normal, escritório silencioso
60 Ar condicionado a uma distância
de 6 m, máquina de costura
70 Aspirador de pó, secador de cabelo,
restaurante ruidoso
80 Tráfego médio de cidade, coletor
de lixo, alarme de despertador
a uma distância de 60 cm
OS RUÍDOS ABAIXO PODEM SER PERIGOSOS
EM CASO DE EXPOSIÇÃO CONSTANTE
90 Metrô, motocicleta, tráfego de
caminhão, cortador de grama
100 Caminhão de lixo, serra elétrica,
furadeira pneumática
120 Show de banda de rock em frente
às caixas acústicas, trovão
140 Tiro de arma de fogo, avião a jato
180 Lançamento de foguete

3
6 Adjust sound 36
Control the volume 36
Adjust Bass/Treble 36
Select Ambisound 36
Select a preset sound 36
7 Adjust settings 37
General setup 37
Audio setup 39
Video setup 40
Preferences 42
8 Additional Information 44
Update software 44
Care 44
9 Specifications 45
10 Troubleshooting 47
11 Glossary 49
Contents
1 Important 4
Safety and important notice 4
Trademark notice 5
2 Your Home Theater System 6
Feature highlights 6
Product overview 7
3 Connect 10
Place the Home Theater System 10
Connect video cables 11
Connect speakers and subwoofer 13
Connect radio antenna 13
Connect audio cables/other devices 14
Connect power cord 17
Attach table stand 17
Mount the Home Theater System 18
Mount the speakers 19
4 Get started 20
Insert the remote control batteries 20
Find the correct viewing channel 21
Select menu display language 21
Start Ambisound setup 22
Turn on Progressive Scan 23
Use Philips EasyLink 23
Select a play source 25
5 Play 26
Play a disc 26
Play video 26
Play music 29
Play photo 30
Play from USB device 32
Play from portable media player 32
Play from iPod 33
Play from radio 34
Contents English
EN

4
Copyright notice
This product incorporates copyright
protection technology that is protected
by method claims of certain U.S. patents
and other intellectual property rights
owned by Macrovision Corporation and
other rights owners. Use of this copyright
protection technology must be authorised
by Macrovision Corporation, and is intended
for home and other limited viewing uses only
unless otherwise authorised by Macrovision
Corporation. Reverse engineering or
disassembly is prohibited.
About Progressive Scan
Consumers should note that not all high
definition television sets are fully compatible
with this product and may cause artifacts to
be displayed in the picture. In case of 525
or 625 progressive scan picture problems,
it is recommended that the user switch the
connection to the ‘standard definition’ output.
If there are questions regarding our TV set
compatibility with this model 525p and 625p
DVD player, please contact our customer
service center.
1 Important
Safety and important notice
Warning
Risk of overheating! Never install the product•
in a confined space. Always leave a space
of at least 4 inches around the product for
ventilation. Ensure curtains or other objects
never cover the ventilation slots on the
product.
Never place the product, remote control or•
batteries near naked flames or other heat
sources, including direct sunlight.
Only use this product indoors. Keep this•
product away from water, moisture and liquid-
filled objects.
Never place this product on other electrical•
equipment.
Keep away from this product during lightning•
storms.
Where the mains plug or an appliance•
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Visible and invisible laser radiation when open.•
Avoid exposure to beam.
Recycle notice
This electronic equipment contains a large
number of materials that can be recycled
or reused if disassembled by a specialized
company. If you are disposing of an old
machine, please take it to a recycling center.
Please observe the local regulations regarding
disposal of packaging materials, exhausted
batteries and old equipment.
EN

5
HDMI, and HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC.
The USB-IF Logos are trademarks of Universal
Serial Bus Implementers Forum, inc.
iPod is a trademark of Apple Inc., registered in
the U.S. and other countries.
“Made for iPod” means that an electronic
accessory has been designed to connect
specifically to iPod and has been certified by
the developer to meet Apple performance
standards.
Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards.
ENERGY STAR and the ENERGY STAR mark
are registered U.S. marks.
Made for
iPod
CLASS 1
LASER PRODUCT
Trademark notice
Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic and the
double-D symbol are trademarks of Dolby
Laboratories.
DivX, DivX Ultra Certified, and associated
logos are trademarks of DivX, Inc. and are
used under license.
Official DivX® Ultra Certified product.
Plays all versions of DivX ® video (including
DivX ® 6) with enhanced playback of DivX®
media files and the DivX® Media Format.
Plays DivX® video with menus, subtitles and
audio tracks.
Manufactured under license under U.S. Patent
#’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and worldwide patents
issued & pending. DTS and DTS Digital
Surround are registered trademarks and the
DTS logos and Symbol are trademarks of
DTS, Inc. © 1996-2008 DTS, Inc. All Rights
Reserved.
Windows Media and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
Important English
EN

6
Hi speed USB 2.0 Link and MP3 link
Simply plug your USB device into the USB jack
to play your MP3/WMA/JPEG/DivX files; or
plug your portable media player to the MP3
LINK jack to enjoy the music play in superb
sound quality.
Sync the audio output with the video play
Synchronize audio and video by delaying the
audio output if the video signal sent to the TV
is slower than the audio streams.
Region codes
You can play discs with the following region
codes.
DVD region code Countries
Latin America
2 Your Home
Theater System
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
at www.philips.com/welcome.
Feature highlights
Philips EasyLink
Your Home Theater System supports
Philips EasyLink, which uses the HDMI CEC
(Consumer Electronics Control) protocol.
EasyLink-compliant devices that are connected
through HDMI connectors can be controlled
by a single remote control.
Note
Philips does not guarantee 100%•
interoperability with all HDMI CEC devices.
Philips Ambisound
Philips Ambisound technology reproduces
multi-channel surround sound with fewer
speakers to give an embracing surround
experience without the hassle of setting up a
full range of speaker systems.
Video upscaling to 1080p
Enjoy watching discs in the highest picture
quality available for your HDTV. This Home
Theater System offers full high-definition
video playback up to 1080p resolution
that provides a highly detailed picture and
increased sharpness that delivers a more
true-to-life picture for an amazing viewing
experience.
EN

7
j MP3 LINK
Connects a portable audio player•
k Display panel
Note
Control buttons on this Home Theater•
Sustem are operated through touch screen
display. The control displays will be dimly lit
after one second of inactivity.
You can change the brightness of the touch•
screen display (see ‘Adjust settings’ > ‘General
Setup’ > [Display Dim]).
Remote control
m
o
p
q
r
s
t
u
v
l
a
b
c
d
e
f
g
h
i
j
k
n
Product overview
Main unit
a (Standby-On)
Turns on the Home Theater System•
or switches to standby mode.
b (Play/Pause)
Starts, pauses or resumes disc play.•
In radio mode, automatically tunes•
radio stations during first-time setup.
c VOL +/-
Increases or decreases volume.•
d (Stop)
Stops disc play.•
In radio mode, erases the current•
preset radio station.
e SOURCE
Selects a media to play or listen to•
audio from the connected device.
f
(Open/Close)
Opens or closes the disc•
compartment.
g Disc compartment
h iPod DOCK
Docks a iPod.•
i
Connects a USB supported device.•
b
h
cdefg a
i
j
k
Your Home Theater System English
EN

8
i TREBLE / BASS
Selects Treble or Bass mode, then•
press +/- to set the level for
treble or bass output.
j Numeric buttons
Selects an item to play.•
k AUDIO SYNC
Selects an audio language or channel•
on a disc.
Press and hold to access the setting•
for audio sync, then press +/- to
set the audio delay time.
In radio mode, toggles between FM•
stereo and FM mono.
l SOUND MODE
Selects a predefined sound effect.•
m REPEAT / PROGRAM
Selects or turns off repeat or shuffle•
mode.
In radio mode, resets the list of•
preset stations: press to manually
reset; press and hold to automatically
reset.
n OK
Confirms an entry or selection.•
o BACK
Returns to a previous screen.•
For DVD, goes to the title menu.•
For VCD version 2.0 or SVCD with•
PBC turned on, returns to the menu
during playback.
p / (Previous/Next)
Skips to the previous or next title,•
chapter, or track.
q (Mute)
Mutes or restores audio output.•
r +/-
Increases or decreases volume.•
s AMBISOUND
Selects stereo sound output or•
multi-channel surround output.
a (Standby-On)
Turns on the Home Theater System•
or switches to standby mode.
When EasyLink is enabled, switches•
the Home Theater System and all
EasyLink devices to standby. Note
that you must press and hold
(Standby-On) for at least 3 seconds
for this to occur.
b
OPEN/CLOSE
Opens or closes the disc•
compartment.
c Source buttons
• DISC: Switches to the disc source.
• USB: Switches to the USB source.
• RADIO: Switches to FM band.
• AUDIO SOURCE: Selects an audio
input source.
• iPod DOCK: Switches to the iPod in
the dock.
d SETUP
Accesses or exits the setup menu.•
e (Navigation buttons)
Navigates through the menus.•
Press left and right for fast backward•
or forward search.
In radio mode, press up and down to•
tune the radio frequency.
In radio mode, press left or right to•
start auto search.
f INFO
For discs, displays information about•
the current status or the disc.
For slideshows, displays a thumbnail•
view of photo files.
g (Play/Pause)
Starts, pauses or resumes disc play.•
In radio mode, automatically tunes•
radio stations during first-time setup.
h (Stop)
Stops disc play.•
In radio mode, erases the current•
preset radio station.
EN

9
t SUBTITLE
Selects the subtitle language on a•
disc.
u HDMI / ANGLE
Selects the video resolution of HDMI•
output.
Press and hold to display video from•
different camera angles.
v ZOOM
Zooms in or out of the picture.•
English
EN
Your Home Theater System

10
Place the Home Theater
System
Place the Home Theater System where•
it cannot be pushed, pulled over or
knocked down. Do not place it in an
enclosed cabinet.
Be sure that you have full access to the•
power cord for easy disconnection of the
Home Theater System from the power
supply.
1 Place this Home Theater System near the
TV.
2 Place the speakers system at normal
listening ear-level and directly parallel to
the listening area.
3 Place the subwoofer at the corner of the
room or at least 3 feet away from the TV.
Tip
To avoid magnetic interference or unwanted•
noise, never place this Home Theater System
too close to any radiation devices.
Note
• Attach the table stand to this Home Theater
System before place it on a table top. (see
‘Attach table stand’ on page 17)
Y
• ou can mount this Home Theater System
(see ‘Mount the Home Theater System’ on
page 18).
RIGHT
LEFT
3 Connect
Make the following connections to use your
Home Theater System.
Basic connections:
Video•
Speakers and subwoofer•
Power•
Optional connections:
Radio antenna•
Audio•
Audio from TV•
Audio from cable box/recorder/•
game console
Other devices•
Portable media player•
USB device•
iPod•
Attach table stand•
Mount the Home Theater System•
Mount the speakers•
Note
Refer to the type plate at the back or bottom•
of the product for identification and supply
ratings.
Before you make or change any connections,•
ensure that all the devices are disconnected
from the power outlet.
Tip
Different types of connectors may be used to•
connect this product to your TV, depending on
availability and your needs. A comprehensive
interactive guide to help you connect your
product is available at www.connectivityguide.
philips.com.
EN

11
Option 1: Connect to the HDMI jack
1 Connect an HDMI cable to the HDMI
OUT jack on this Home Theater System
and the HDMI input jack on the TV.
Note
If your device supports HDMI CEC, you can•
control compliant devices with a single remote
control. (see ‘Get started’ > ‘Use Philips
EasyLink’).
Tip
If the TV has a DVI connection only, connect•
via a HDMI/DVI adaptor. Connect an audio
cable for sound output.
You can optimize the video output. (see•
‘Adjust settings’ > ‘Video setup’ > [HDMI
Setup]).
This type of connection provides the best•
picture quality.
HDMI IN
HDMI OUT
Connect video cables
Connect this Home Theater System to TV to
view disc play. Select the best video connection
that the TV can support.
Option 1: Connect to the HDMI jack (for•
a HDMI, DVI or HDCP-compliant TV).
Option 2: Connect to the component•
video jacks (for a standard TV or
Progressive Scan TV).
Option 3: Connect to the video (CVBS)•
jack (for a standard TV).
Note
You must connect this Home Theater System•
directly to a TV.
Before you connect
1 Push up the catch and remove the rear
cover.
2 Connect the cables to the corresponding
jacks and direct the cables to the open
hole on top.
See the connection options in the•
following pages.
3 Once complete, close the rear cover.
Note
All the cables must be placed inside the rear•
panel in order to close the rear cover properly.
Connect English
EN

12
Option 3: Connect to the Video
(CVBS) jack
1 Connect a composite video cable to the
VIDEO OUT jack on this Home Theater
System and the VIDEO input jack on the
TV.
Note
The video input jack on the TV might be•
labeled as A/V IN, VIDEO IN, COMPOSITE or
BASEBAND.
This type of connection provides standard•
picture quality.
VIDEO
OUT
VIDEO IN
Option 2: Connect to the component
video jack
1 Connect the component video cable to
the COMPONENT VIDEO OUT jack
on this Home Theater System and the
COMPONENT VIDEO input jack on the
TV.
If a progressive scan TV is used, you•
may turn on the progressive scan
mode.
Note
The component video input jack on the TV•
might be labeled as Y Pb/Cb Pr/Cr or YUV.
This type of connection provides good picture•
quality.
COMPONENT
VIDEO OUT
EN

13
Note
Ensure that the front portion of the plug is fully•
inserted into the jack.
Connect radio antenna
1 Connect the FM antenna to the FM75
jack on the subwoofer (for some models,
this cable is already connected).
2 Extend the FM antenna and fix its ends to
the wall.
Tip
For better FM stereo reception, connect to an•
external FM antenna.
FM ANTENNA
(75 Ω)
Connect speakers and
subwoofer
1 Connect the left and right speakers to the
matching jacks on the subwoofer.
2 Unwind the subwoofer’s interconnect
cable at TO MAIN UNIT and connect
it to the TO SUBWOOFER jack on this
Home Theater System.
LEFT
RIGHT
TO SUBWOOFER
TO MAIN UNIT
English
EN
Connect

14
Connect audio from cable box/
recorder/game console
You can choose to connect to analog or digital
jack depending on the device capabilities.
Connect to analog jacks
1 Connect the audio cables (not supplied)
to the AUDIO IN-AUX2 or AUX3 jacks
on the subwoofer and the AUDIO output
jacks on the device.
Note
To listen to the audio output from this•
connection, press AUDIO SOURCE
repeatedly until ‘AUX2 INPUT’ or ‘AUX3
INPUT’ is displayed on the display panel.
AUX 2
AUDIO IN
AUDIO OUT
Connect audio cables/other
devices
Route the audio from other devices to this
Home Theater System to enjoy audio play with
multi-channel surround capabilities.
Connect audio from TV
(also used for EasyLink control)
1 Connect the audio cables (not supplied)
to the AUDIO IN-AUX1 jacks on the
Home Theater System and the AUDIO
output jacks on the TV.
Note
To listen to the audio output from this•
connection, press AUDIO SOURCE
repeatedly until ‘AUX1 INPUT’ is displayed on
the display panel.
AUDIO OUT
EN

15
Note
To listen to the audio output from this•
connection, press AUDIO SOURCE
repeatedly until ‘OPTICAL INPUT’ is displayed
on the display panel.
Connect portable media player
1 Connect a 3.5mm stereo audio cable
to the MP3 LINK jack on this Home
Theater System and the phone jack on
the portable media player (such as MP3
player).
Note
To listen to the audio output from this•
connection, press AUDIO SOURCE
repeatedly until ‘MP3 LINK’ is displayed on the
display panel.
MP3
Connect to coaxial jack
1 Connect a coaxial cable (not supplied) to
the COAXIAL DIGITAL-IN jack on the
subwoofer and the COAXIAL/DIGITAL
output jack on the device.
Note
To listen to the audio output from this•
connection, press AUDIO SOURCE
repeatedly until ‘COAXIAL INPUT’ is
displayed on the display panel.
Connect to optical jack
1 Connect an optical cable (not supplied)
to the OPTICAL DIGITAL-IN jack on
the subwoofer and the OPTICAL/SPDIF
output jack on the device.
DIGITAL IN
COAXIAL
DIGITAL OUT
DIGITAL OUT
OPTICAL /
DIGITAL IN
English
EN
Connect

16
Connect iPod
1 Push the ‘slide’ button (A) to one side
and move the ‘holder’ (C) until you get
the best position to fit your iPod.
2 Release the ‘slide’ button (A).
3 Select a matching dock adaptor (D) and
attach it to the ‘holder’ (C).
4 Dock your iPod to iPod DOCK slot on
this Home Theater System.
Note
To listen to the audio output from this•
connection, press iPod DOCK.
DOCK POSITION SWITCH
A
C
B
D
Connect USB device
1 Connect the USB device to USB jack
on this Home Theater System.
Note
This Home Theater System can only play/view•
MP3, WMA, DivX (Ultra) or JPEG files that are
stored on such devices.
Press• USB to access the content and play the
files.
EN

17
Attach table stand
A = table stand bracket.
1 Ensure all the required cables are
connected to this Home Theater System
and close the rear cover.
2 Attach the table stand bracket to the rear
of this Home Theater System.
Align the arrow indicators for•
correct positioning and placement.
Use the protrude panels to hold the•
table stand bracket.
Align Arrow
With table Stand
A
A
Align Arrow
With table Stand
A
Connect power cord
Warning
Risk of product damage! Ensure that the•
power supply voltage corresponds to the
voltage printed on the back or underside of
the subwoofer. Set the voltage selector (if any)
correctly before you connect the subwoofer
to the power outlet.
1 Connect the power cord to the power
outlet when all the required connections
are done.
The Home Theater System is ready to»
be set up for use.
English
EN
Connect

18
4 Hook the Home Theater System firmly
onto the mounted bracket.
5 Screw the supplied knob to the hole at
the center rear to secure the bracket.
Mount the Home Theater
System
Caution
Risk of personal injury and damage to the•
product. Allow only qualified persons to
mount the product.
1 Ensure all the required cables are
connected to this Home Theater System
and close the rear cover.
2 Attach the big wall mount bracket to the
table stand bracket with screws.
3 Position the brackets on the wall, drill
four screw holes and secure the brackets
onto the wall with screws (not supplied).
B
A
EN

19
3 Fix two screws (not supplied) to the wall,
then hook the bracket onto the screws
and lock the speaker into position.
Mount the speakers
Caution
Risk of personal injury and damage to the•
product. Allow only qualified persons to
mount the product.
1 Loosen the screws at the bottom of the
speaker to remove the speaker stand.
2 Attach the small wall mount bracket to
the speaker with screws.
English
EN
Connect

20
Control a play source
1 Press RADIO, USB or DISC button to
select the source you wish to control.
2 Select the desired function (for example
, ).
Navigate through the menu
1 Point the remote control directly at the
remote sensor on the product and select
the desired function.
2 Press the following buttons on the
remote control to navigate through the
on-screen menus.
Button Action
Move up or down
Move left or right
OK Confirm a selection
Enter numbers
4 Get started
Insert the remote control
batteries
1 Slide the battery cover off the back of the
remote control.
2 Insert the 2 supplied batteries (AAA). Be
sure the + and - ends of the batteries line
up with the markings inside the case.
3 Slide the cover back into position.
Note
Do not mix batteries (old and new or carbon•
and alkaline, etc.).
Remove batteries if they are exhausted or if•
the remote control is not to be used for a long
time.
Batteries contain chemical substances, they•
should be disposed of properly.
EN