EConnect the Junction Box to the
TV
Connect the scart cable from the Junction box to
the SCART IN socket on your TV.
To AC
power
Base view of AV
Wireless
receiver box
BConnect the front speakers and
subwoofer
CConnect the rear speakers and
AV wireless receiver box
AFinding the viewing channel
APress SOURCE on the remote control
until “DISC” appears on the display panel.
BTurn on the TV. Use the TV’s remote control
to select the correct viewing channel for the
DVD system.
You should see the blue DVD background on
the TV.
Note To search for the correct viewing
channel, press the CHANNEL DOWN button
on the TV’s remote control repeatedly (or AV,
SELECT button) until you see the blue DVD
background.
BSelect the display language on
the screen
APress SYSTEM MENU on the remote.
BPress Éto select { General Setup Page }.
CUse ST keys to select a language option in the
menu and press OK to conrm.
DPress SYSTEM MENU to exit.
Note The language selected here is only for
the system menus that are shown on the TV
while operating this DVD system, not for the
DVD disc menu.
There are various system setup options (Audio
Setup, Video Setup, Preference Setup) available on
this DVD system. Refer to the accompanying user
manual for more information.
VGA cable
DPosition the speakers and
subwoofer
Proper speakers and system placement is
important to ensure optimum sound performance.
APlace the FRONT CENTER speaker above
or close to the TV.
BPlace the SUBWOOFER on the oor, at least
one metre away from the TV.
CPlace the FRONT LEFT/RIGHT speakers at
equal distances from the TV.
DPlace the REAR CENTER speaker at normal
listening ear level.
EEnsure the front of the AV Wireless Receiver
box (with Philips logo) is facing towards the
DVD system.
Note If there is an interference on your
HTS9800W speakers or existing wireless
network in your home, see the User Manual
– “Troubleshooting”.
Note For optimal wireless performance, ensure
that the AV wireless receiver box is not placed in
an enclosed area.
B
Base view of the speaker stand
Both the
coloured
stickers must
match
A
C
Placement and Connections
AAssemble the speakers
AConnect the speaker stand with the supplied
speaker wire. Match the colour of the speaker
wire to the colour of the socket on the base of
the speaker stand.
Hold down the socket tab while inserting the
stripped portion of the speaker wire into the tab.
Then, release the socket tab to lock the wire into
position.
BMatch the coloured stickers on the rear of the
speaker and the inside of the speaker stand.
Position the speakers as shown and ensure the
connectors t. See the above illustration.
CSecure the speaker stand with the supplied
screws.