Philips MCD139/79 User manual

1
4
7
2
5
8
0
3
6
9
PROG
AUDIO MUTE
GOTO
VOL
+
ZOOM
DSC
DBB
OK
SYSTEM MENU
MODE CLOCKA-B
SLEEP/TIMER
DISPLAY
OSD
DISC MENU
DISC AUX TUNER
SUBTITLE
CR2025
MCD139
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
1
Quick Start Guide
Quick start guide
2
User Manual
Remote control with one
CR2025 battery loaded
DIN cable
User manual
Composite video cable Remove the insulation plastic tab
before use
FM wire antenna
MCD139_79_QSG_Eng 21/7/06, 17:561

Speakers
Right Speaker
Subwoofer White
Red
Green
––
Black
+
1 1
3
4
5
AC Power Cord
FM wire antenna
TV
2
ANTENNA
FM
(75Ω)
Important!
–This set can only be operated after the
supplied DIN cable has been connected.
Tips
–See the User Manual for otherTV
connection options.
–For connecting to a Progressive Scan
TV, refer to the user manual for proper
connections and detailed setup.
1
3
4
5
Connect the speaker wires of the right speaker and subwoofer to the
left speaker.
Connect the left speaker and the DVD player by using the supplied
DIN cable.
Connect the DVD player to your TV using the supplied composite video
cable.
Connect the AC power cord to the wall socket.
2
Connect the supplied FM wire antenna.
Setting up the TV
Press SOURCE (DISC on the remote) to select disc source.
Turn on the TV and set it to the correct Video In channel.
1
4
7
2
5
8
0
3
6
9
PROG
AUDIO MUTE
GOTO
VOL
+
ZOOM
DSC
DBB
OK
SYSTEM MENU
MODE CLOCKA-B
SLEEP/TIMER
DISPLAY
OSD
DISC MENU
DISC AUX TUNER
SUBTITLE
1
2
Notes for the remote control:
–First, select the source you wish to
control by pressing one of the source
select keys on the remote control
(DISC or AUX, for example).
–Then select the desired function
(
2; , í , ë for example).
MCD139_79_QSG_Eng 21/7/06, 17:562

OFF
OFF
NIGHT MODE
GOTO SOUND SETUP PAGE
TEST TONE
Tip
See chapters "Getting Started" and "DVD menu operations" in the
User Manual for detailed descriptions.
SETUP MENU
8 ADULT
CHANGE
ENGLISH
RESET
GOTO FEATURE SETUP PAGE
OSD LANG
NORMAL/PS
MULTI
OFF
ON
GOTO PICTURE SETUP PAGE
TV DISPLAY
TV TYPE
PROGRESSIVE
SCREEN SAVER
ENGLISH
ENGLISH
ENGLISH
GOTO LANGUAGE SETUP PAGE
AUDIO
SUBTITLE
DISC MENU
Setting DVD menu options
IMPORTANT!
If the progressive scan feature is activated but the connectedTV does not support
progressive signals or the video cables are not connected accordingly, see the user
manual for proper progressive scan setup or deactivate the progressive scan
feature as below:
1)Turn off your TV progressive scan mode then turn on to interlaced mode.
2) Select “OFF” in PROGRESSIVE menu of the system setup menu to turn off
progressive scan, then press SYSTEM MENU on the remote to exit the system
menu.
OrTo turn off progressive scan, you may also first open the disc door, then hold
down ™on the front panel, and press numeric key “1” on the remote.
Setting the clock
1
2
3
4
1
4
7
2
5
8
0
3
6
9
PROG
AUDIO MUTE
GOTO
VOL
+
ZOOM
DSC
DBB
OK
SYSTEM MENU
MODE CLOCKA-B
SLEEP/TIMER
DISPLAY
OSD
DISC MENU
DISC AUX TUNER
SUBTITLE
SYSTEM MENU
In standby or power on mode, press and hold CLOCK on the remote control.
The clock digits flash on the display.
Press ¡/ ™repeatedly to set the hours.
Press à/ árepeatedly to set the minutes.
1
4
7
2
5
8
0
3
6
9
PROG
AUDIO MUTE
GOTO
VOL
+
ZOOM
DSC
DBB
OK
SYSTEM MENU
MODE CLOCKA-B
SLEEP/TIMER
DISPLAY
OSD
DISC MENU
DISC AUX TUNER
SUBTITLE
CLOCK
Press CLOCK again to store the setting.
MCD139_79_QSG_Eng 21/7/06, 17:563

Playing a disc
1
2
3
4
Push OPEN /CLOSEçto open the disc door.
Load in a disc with the label side facing up, then close the disc door.
Playback will start automatically. If not, pressÉÅ.
To stop playback, press 9.
PDCC-JH-0627
2006 CKoninklijie Philips Electronics
N.V. All rights reserved.
http://www.philips.com
Tip
Detailed playback features and
additional functions are described in the
accompanied user manual.
Programming and tuning to radio stations
1
2
3
Press SOURCE (TUNER on the remote) to select tuner source (FM).
Press PROGRAM on the set for more than two seconds to program all available stations
in order of waveband.
Press ¡/ ™(Numberic keys on the remote) until the desired preset station is displayed.
4
3
2
0
9
!
5
6
1
8
7
To s witch on the system,
press STANDBY ONB/
SOURCE on the set, or
DISC/TUNER/AUX on the
remote.
MCD139_79_QSG_Eng 21/7/06, 17:564