Philips BTB2370 User manual

www.philips.com/support
BTB2370
User manual
Always there to help you
Register your product and get support at
Question?
Contact
Philips

1EN
Contents
1 Important 2
Safety 2
2 Your micro system 3
Introduction 3
What's in the box 3
Overview of the main unit 4
Overview of the remote control 5
3 Get started 7
Connect speakers 7
Connect FM antenna 7
Connect power 7
Prepare the remote control 8
Demonstrate the features 8
Set clock 8
Turn on 8
4 Play 10
Play from disc 10
Play from USB 10
Control play 10
Skip to a track 10
Program tracks 11
Play from Bluetooth-enabled devices 11
5 Listen to the radio 13
Listen to DAB+ radio 13
Listen to FM radio 14
6 Other features 16
Set the alarm timer 16
Set the sleep timer 16
Listen to an external device 16
Charge your devices 17
7 Product information 18
Specications 18
USB playability information 19
Supported MP3 disc formats 19
RDS program types 19
8 Troubleshooting 21
9 Notice 23
Compliance 23
Care of the environment 23
Care for your product 24

2EN
1 Important
Safety
• Make sure that there is enough free space
around the product for ventilation.
• Only use attachments or accessories
speciedbythemanufacturer.
• Battery usage CAUTION –To prevent
battery leakage which may result in bodily
injury, property damage, or damage to the
product:
• Install the battery correctly, + and - as
marked on the product.
• Remove the battery when the product
is not used for a long time.
• The battery shall not be exposed to
excessiveheatsuchassunshine,reor
the like.
• The product shall not be exposed to
dripping or splashing.
• Do not place any sources of danger on the
product(e.g.liquidlledobjects,lighted
candles).
• Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Warning
• Never remove the casing of this device.
• Never lubricate any part of this device.
• Never place this device on other electrical equipment.
• Keep this device away from direct sunlight, naked
amesorheat.
• Never look into the laser beam inside this device.
• Ensure that you always have easy access to the power
cord, plug, or adaptor to disconnect this device from
the power.

3EN
2 Your micro
system
Congratulations on your purchase, and
welcometoPhilips!Tofullybenetfromthe
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this unit, you can:
• enjoy audio from discs, Bluetooth-enabled
devices, USB storage devices, or other
external devices;
• listen to Digital Audio Broadcasting (DAB)
or FM radio stations.
You can enjoy one of the following sound
effects:
• Balance, Clear, Powerful, Warm, and
Bright
The unit supports these media formats:
What's in the box
Check and identify the contents of your
package:
• Main unit
• 2 x speakers with cables
• 1 x FM wire antenna
• Remote control (with one AAA battery)
• Short User Manual
• Safety&Notice sheet

4EN
Overview of the main unit
a
• Turn the unit on or off.
• Switch to standby mode or Eco
standby mode.
b AUDIO IN
• Audio input socket (3.5mm) for an
external audio device.
c Display panel
d /
• Skip to the previous/next track.
• Search within a track/disc/USB.
• Tune to a radio station.
• Adjust time.
e
• Start, pause, or resume play.
f Volume knob
• Adjust volume.
g
• Open/close the disc compartment.
h
• Stop play or erase a program.
i Disc compartment
ade cb f
ghijk lm
no
j SOURCE/PAIRING
• Press to select a source: DISC,
BLUETOOTH, USB, DAB,TUNER,
AUDIO IN.
• In Bluetooth mode with two devices
connected, press and hold for 3
secondstodisconnecttherst
connected device and enter pairing
mode.
• In Bluetooth mode with one device
connected, press and hold for 3
seconds to enter pairing mode.
k
• USB socket.
l FM AERIAL
• FM antenna socket.
m Micro USB socket
• For DAB upgrade only.
n SPEAKER OUT
• Speaker sockets.
o AC MAINS ~
• Power socket.

5EN
Overview of the remote
control
a
• Turn the unit on or off.
• Switch to standby mode or Eco power
standby mode.
b /PAIRING
• Press to select the BT (Bluetooth)
source.
• In Bluetooth mode with two devices
connected, press and hold for 3
secondstodisconnecttherst
connected device and enter pairing
mode.
• In Bluetooth mode with one device
connected, press and hold for 3
seconds to enter pairing mode.
c USB/AUDIO IN
• Press repeatedly to select the USB or
AUDIO IN source.
a
b
c
d
e
f
g
h
i
j
kl
m
n
o
p
q
r
d /
• Skip to the previous/next track.
• Search within a track/disc/USB.
• Tune to a radio station.
• Adjust time.
e DIM
• Adjust display brightness.
f /MENU
• Stop play or erase a program.
• Access the DAB+ or FM menu.
g SOUND
• Select a preset sound effect.
h +/-
• Adjust volume.
i
• Mute or restore volume.
j PROG/SCAN
• Program tracks.
• Program radio stations.
• Scan FM or DAB+ radio stations.
k CLOCK
• Set the clock.
• View clock information.
l SLEEP/TIMER
• Set sleep timer.
• Set alarm timer.
m INFO
• Display the current status or disc
information.
• For selected FM radio stations, display
RDS information (if available).
n ALBUM/PRESET /
• Select a preset radio station.
• Skip to the previous/next album.
o MODE
• Selectrepeatorshufeplaymode.
p /OK
• Start, pause, or resume play.
• Conrmaselection.
• Switch between FM stereo and mono
broadcast.

6EN
q DAB/FM
• Press repeatedly to select the DAB or
FM source.
r CD
• Select the DISC source.

7EN
3 Get started
Caution
• Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
laser exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus.The
model number and serial number are on the
back of the apparatus.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Connect speakers
Note
• Insert the stripped portion of each speaker wire into
the socket completely.
• For better sound quality, use the supplied speakers only.
1 Fortherightspeaker,ndthesocketson
the back of the main unit marked "R".
2 Insert the red wire into the red (+) socket,
and the black wire into the black (-) socket.
3 Fortheleftspeaker,ndthesocketsonthe
main unit marked "L".
4 Repeat step 2 to insert the left speaker
wire.
To insert each speaker wire:
1 Holddownthesocketap.
2 Insert the speaker wire fully.
3 Releasethesocketap.
Connect FM antenna
• Before listening to radio, connect the
supplied FM antenna to this device.
Connect power
Caution
• Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the unit.
• Before you connect the AC power cord, ensure that
you have completed all other connections.

8EN
Connect the power cable to the wall socket.
Prepare the remote control
Caution
• Risk of product damage! When the remote control is
not used for long periods, remove the battery.
To insert the remote control battery:
1 Open the battery compartment.
2 Insert the supplied AAA battery with
correct polarity (+/-) as indicated.
3 Close the battery compartment.
Demonstrate the features
In standby mode, press to demonstrate
features of this device.
» The features are displayed one by one
across the display panel.
• To turn off the demonstration, press
again.
Set clock
1 In power-on mode, press and hold
CLOCK on the remote control for 3
seconds.
» The [24H] or [12H] hour format is
displayed.
2 Press / to select the [24H] or
[12H] hour format.
3 press CLOCKtoconrm.
» The hour digits are displayed and begin
to blink.
4 Repeat steps 2-3 to set the hour and
minute, and whether to synchronize the
clock with an RDS radio or a DAB station
that transmits time signals.
Note
• If no button is pressed within 90 seconds, the unit exits
clock setting mode automatically.
Tip
• You can press CLOCK to view clock information in
power-on mode.
Turn on
• Press .
» The unit switches to the last selected
source.
Switch to standby mode
• Press again to switch the unit to standby
mode.
» The clock (if set) is displayed on the
panel.