Philips DCM109 User manual

MP
3
-LINK
SOURCE
VOLUME
DBBMODE
DOCKINGENTERTAINMENT SYSTEM DCM109
DOCKfor
DCM109
Register your product and get support at
www.philips.com/welcome
Quick Start Guide
User Manual
Remote Control
Main unit
User Manual Quick Start Guide
2 x Loudspeaker boxes
1 x MP3 link cable
Quick Start Guide
USB iPhone
MP3-LINK
SLEEP
iPod
REP
CLOCK/DISPLAY
SHUF
OK
MUTE MENU

MP
3
-LINK
SOURCE
VOLUME
DBB
MODE
DOCKING ENTERTAINMENT SYS TEM DCM109
DOCK for
USB iPhone
MP3-LINK
SLEEP
iPod
REP
CLOCK/DISPLAY
SHUF
OK
MUTE MENU
AConnect
a
BPlay discs
1Press DISC on the remote control to select
the disc source.
2Press on the top panel of the unit.
3Place a disc onto the tray and press again.
Ensure that the label side faces upwards.»
Play starts automatically.»
If play does not start, press / to select a
track and then press .
CPlay from USB
USB iPhone
MP3-LINK
SLEEP
iPod
REP
CLOCK/DISPLAY
SHUF
OK
MUTE MENU
MP
3
-LINK
SOURCE
VOLUME
DBBMODE
DOCKINGENTERTAINMENT SYSTEM DCM109
DOCK for
a
1Insert the USB plug of a USB device into
the socket on the main unit.
2Press USB to select the USB source.
3Press ALB/PRESET+/- to select a folder.
4Press /WRVHOHFWDÀOH
5Press to start play.
1Fully insert the plugs from the speakers into
the speaker sockets on the main unit.
1Connect the power plug to the wall outlet.
b

DE
Play from iPod/iPhone Listen to radio
USB iPhone
MP3-LINK
SLEEP
iPod
REP
CLOCK/DISPLAY
SHUF
OK
MUTE MENU
MP
3
-LINK
SOURCE
VOLUME
DBB
MODE
DOCKINGENTER
TAINMENTSYSTEMDCM109
DOCK for
1Press TUN to select FM.
2Press and hold / for more than 2
seconds.
3Repeat step 2 to tune to more stations.
To tune to a weak station, press
/UHSHDWHGO\XQWLO\RXÀQGRSWLPDO
reception.
MP
3
-LINK
SOURCE
VOLUME
DBBMODE
DOCKING ENTERTAINMENTS
YSTEM DCM109
DOCK for
1Place the iPod/iPhone in the dock.
The main unit switches to iPod/iPhone»
mode automatically and start playback.
MP
3
-LINK
SOURCE
VOLUME
DBBMODE
DOCKINGENTERTAINMENT SYSTEM DCM109
DOCK for
USB iPhone
MP3-LINK
SLEEP
iPod
REP
CLOCK/DISPLAY
SHUF
OK
MUTE MENU
FSet clock
1Press and hold CLOCK/DISPLAY to
activate the clock setting mode.
2Press PROG repeatedly to select 12 hour
or 24 hour format.
3Press CLOCK/DISPLAYWRFRQÀUP
4Press / to set the hour.
5Press CLOCK/DISPLAYWRFRQÀUP
6Press / to set the minute.
7Press CLOCK/DISPLAYWRFRQÀUP

© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
Printed in China DCM109_37_QSG_V1.1