Philips MCM1110 User manual

Register your product and get support at
MCM1110
EN User manual

1 Important
Safety
Know these safety symbols
This ‘bolt of lightning’ indicates uninsulated material within your unit may
cause an electrical shock. For the safety of everyone in your household,
please do not remove product covering.
The ‘exclamation point’ calls attention to features for which you should
read the enclosed literature closely to prevent operating and maintenance
problems.
WARNING: To reduce the risk of re or electric shock, this apparatus
should not be exposed to rain or moisture and objects lled with liquids,
such as vases, should not be placed on this apparatus.
CAUTION:To prevent electric shock, match wide blade of plug to wide
slot, fully insert.
a Read these instructions.
b Keep these instructions.
c Heed all warnings.

d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.
h Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including ampliers) that
produce heat.
i Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
j Only use attachments/accessories specied by the manufacturer.
k Use only with the cart, stand, tripod, bracket, or table
specied by the manufacturer or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
l Unplug this apparatus during lightning storms or when unused for
long periods of time.
m Refer all servicing to qualied service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.

n Battery usage CAUTION – To prevent battery leakage which may
result in bodily injury, property damage, or damage to the remote
control:
• Install all batteries correctly, + and - as marked on the remote
control.
• Do not mix batteries (old and new or carbon and alkaline,
etc.).
• Remove batteries when the remote control is not used for a
long time.
• Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, re, or the like.
o Apparatus shall not be exposed to dripping or splashing.
p Do not place any sources of danger on the apparatus (e.g. liquid
lled objects, lighted candles).
q Where the MAINS plug or an appliance coupler is used as the
disconnect device, the disconnect device shall remain readily
operable.
Warning
•Never remove the casing of this apparatus.
•Never lubricate any part of this apparatus.
•Never place this apparatus on other electrical equipment.
•Never look into the laser beam inside this apparatus.
•Make sure that you always have easy access to the power cord, plug, or adaptor to
disconnect the apparatus from the power.
Caution
•Use of controls or adjustments or performance of procedures other than herein may
result in hazardous radiation exposure or other unsafe operation.

Hearing safety
Listen at a moderate volume.
• Using headphones at a high volume can impair your hearing.This
product can produce sounds in decibel ranges that may cause
hearing loss for a normal person, even for exposure less than a
minute.The higher decibel ranges are offered for those that may
have already experienced some hearing loss.
• Sound can be deceiving. Over time your hearing ‘comfort level’
adapts to higher volumes of sound. So after prolonged listening, what
sounds ‘normal’ can actually be loud and harmful to your hearing.To
guard against this, set your volume to a safe level before your hearing
adapts and leave it there.
To establish a safe volume level:
• Set your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and
clearly, without distortion.
Listen for reasonable periods of time:
• Prolonged exposure to sound, even at normally ‘safe’ levels, can also
cause hearing loss.
• Be sure to use your equipment reasonably and take appropriate
breaks.
Be sure to observe the following guidelines when using your
headphones.
• Listen at reasonable volumes for reasonable periods of time.
• Be careful not to adjust the volume as your hearing adapts.
• Do not turn up the volume so high that you can’t hear what’s
around you.
• You should use caution or temporarily discontinue use in potentially
hazardous situations. Do not use headphones while operating a
motorized vehicle, cycling, skateboarding, etc.; it may create a trafc
hazard and is illegal in many areas.

Notice
Any changes or modications made to this device that are not expressly
approved by Philips Consumer Lifestyle may void the user’s authority to
operate the equipment.
This product complies with the radio interference requirements of the
European Community.
This product complies with the requirements of the following directives
and guidelines: 2004/108/EC + 2006/95/EC
Your product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product it
means that the product is covered by the European Directive 2002/96/EC.
Please inform yourself about the local separate collection system for
electrical and electronic products.
Please act according to your local rules and do not dispose of your old
products with your normal household waste. Correct disposal of your
old product helps to prevent potential negative consequences for the
environment and human health.

Your product contains batteries covered by the European Directive
2006/66/EC, which cannot be disposed with normal household
waste.Please inform yourself about the local rules on separate collection of
batteries because correct disposal helps to prevent negative consequences
for the environmental and human health.
Environmental information
All unnecessary packaging has been omitted.We have tried to make
the packaging easy to separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.)
Your system consists of materials which can be recycled and reused if
disassembled by a specialized company. Please observe the local regulations
regarding the disposal of packaging materials, exhausted batteries and old
equipment.
The making of unauthorized copies of copy-protected material, including
computer programs, les, broadcasts and sound recordings, may be an
infringement of copyrights and constitute a criminal offence. This equipment
should not be used for such purposes.
This apparatus includes this label:
Note
•The type plate is located on the bottom of the apparatus.

2 Your micro system
Congratulations on your purchase, and welcome to Philips! To fully benet
from the support that Philips offers, register your product at www.philips.
com/welcome.
Introduction
With this unit, you can:
• Enjoy audio from discs, USB storage devices, and other external
devices;
• Listen to radio stations.
You can enrich sound output with the following sound effects:
• Digital Sound Control (DSC)
• Dynamic Bass Boost (DBB)
The unit supports the following media formats:

What’s in the box
Check and identify the contents of your package:
• Main unit
• 2 x speakers
• Remote control
• MP3 link cable
• Quick start guide
• User manual

Overview of the main unit
a • Turn on the main unit
• Switch to standby mode
b SOURCE
• Select a source.
c STOP
• Stop play or erase a program.
a
b
c
f
e
d
g
h
i
k
l
m
n
j

d PLAY/PAUSE
• Start or pause play.
e / PREVIOUS/NEXT
• Skip to the previous/next track.
• Fast reverse or fast forward within a track or disc.
• Tune to a radio station.
• Adjust time.
f • Connect to USB storage device.
g MP3-LINK
• Connect to an external audio device.
h • Connect to a headphone.
i • Open/close the disc compartment.
j Display panel
• Show current status.
k MODE
• Select repeat play mode in CD, or USB source.
• Select shufe play mode in CD, or USB source.
l CLOCK
• Set clock.
m ALBUM/PRESET+/-
• Select a preset radio station.
• Skip to the previous/next album.
n VOLUME(Volume knob)
• Adjust volume.

Overview of the remote control
k
l
a
m
n
o
p
q
r
s
t
c
b
d
e
f
g
h
i
j
a Source selection keys (CD, TAPE, TUNER, MP3 LINK, USB)
• Select a source.

b CLOCK
• Set clock.
c REPEAT
• Select a repeat play mode: repeat one track or all tracks.
d /
• Skip to the previous/next track.
• Tune to a radio station.
• Adjust time.
e PROG
• Program tracks.
• Program radio stations.
• Select 12 hour or 24 hour format.
f /
• Fast reverse or fast forward within a track or disc.
g ALB/PRESET -/+
• Skip to the previous/next album.
• Select a preset radio station.
h MUTE
• Mute volume.
i DSC
• Select a preset sound setting: POP, JAZZ, ROCK, or CLASSIC.
j TIMER
• Set the alarm timer.
k • Turn on the main unit.
• Switch to standby mode.
l DIMMER
• Access illuminate dimmer settings.

m SLEEP
• Set the sleep timer.
n SHUFFLE
• Play tracks randomly.
o • Start or pause play.
p DISPLAY
• Show playback information.
q • Stop play or erase a program.
r VOL +/-
• Adjust volume.
s DBB
• Turns on or off dynamic bass enhancement.
t RDS
• For selected FM radio stations: display RDS information.

3 Get started
Caution
•Use of controls or adjustments or performance of procedures other than herein may
result in hazardous radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial number of
this apparatus.The model number and serial number are on the bottom of
the apparatus.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Connect speakers
Note
•Make sure that the colors of the speaker wires and terminals are matched.

1 Hold down the socket ap.
2 Insert the stripped part of the wire completely.
• Insert the right speaker wires to “RIGHT“, left speaker wires
to “LEFT“.
• Insert the red wires to “+“, black wires to “-“.
3 Release the socket ap.
abc

Connect power
Caution
•Risk of product damage! Ensure that the power supply voltage corresponds to the
voltage printed on the back or the underside of the unit.
•Risk of electric shock! When you unplug the AC power cord, always pull the plug from
the socket. Never pull the cord.
•Before you connect the AC power cord, make sure that you have completed all other
connections.
Connect the power cable to the wall socket.

Prepare the remote control
Caution
•Risk of explosion! Keep batteries away from heat, sunshine or re. Never discard
batteries in re.
•Risk of decreased battery life! Never mix different brands or types of batteries.
•Risk of product damage! When the remote control is not used for long periods, remove
the batteries.
•Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
To insert the remote control battery:
1 Open the battery compartment.
2 Insert 2 AAA batteries with correct polarity (+/-) as indicated.
3 Close the battery compartment.

Turn on
Press to turn on.
» The unit switches to the last selected source.
Tip
•In standby mode, you can also press CD, TUNER, MP3 LINK to switch on the unit.
Switch to standby mode
Press again to switch the unit to standby mode.
» The clock (if set) appears on the display panel.
Note
•When the unit remains idle for 15 minutes, t switches from standby mode automatically.
Set clock
1 In standby mode, press and hold CLOCK on the remote control to
activate the clock setting mode.
» The 12/24 hour format blinks.

2 Press / repeatedly to select the format.
» The hour digits are displayed and begin to blink.
3 Press / to set the hour.
4 Press CLOCK.
» The minute digits are displayed and begin to blink.
5 Press / to set the minute.
6 Press CLOCK to conrm.
• To exit clock setting mode without storing, press .
7 To view the clock, press CLOCK.
Note
•After 90 seconds in idle mode (no button is pressed), the system exits the clock setting
mode automatically.