Philips MCM138D/79 User manual

Quick Start Guide
Step B
Step A
Enjoy
Setup
1
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
MW Antenna
Quick Start Guide
Pull out the insulation
plastic sheet.
2
User Manual
User Manual
VOLUME
ALBUM
DBB DSC
MUTE
SLEEP TIMER
REPEAT SHUFF
AUX PROG
CD TUNER
VOLUME
DBB DSC
Remote Control
MCM138D
iPod Dock
& 4 Dock Adaptors
MCM138D_12 QUG_Eng_iPod 5/16/08, 16:481

Step A Setup
1
2
3
Tip
It is unnecessary to
connect the FM pigtail
antenna since it is
fixed to the main unit.
Connection
5
1
2
3
4
Setting the clock
For radio reception, connect the supplied MW antenna to the
MW aerial terminal.
Connect the speaker wires to the SPEAKERS terminals.
Connect the power cord of the system to the
AC power outlet.
In standby mode, press PROG/CLOCK button.
The clock digits for the hours flash.
Press ¡1 / 2™ to set the hours.
Press PROG/CLOCK again.The clock digits for the minutes flash.
Press ¡1 / 2™ to set the minutes.
Press PROG/CLOCK to confirm the time.
iR
PROG/CLOCK
MICRO SYSTEM MCM138D
MCM138D_12 QUG_Eng_iPod 5/16/08, 16:482

1
2
3
4
5
Tip
Detailed playback features and
additional functions are described in
the accompanied owner's manual.
Step B Enjoy
Playing a disc
1
2
Select TUNER source.
Press BAND (TUNER on the remote control) once or more to select your waveband.
Tu r n TUNING 0to tune to a station.
Listening to radio
3
SLEEP TIMER
REPEAT
AUX
SHUFF
PROG
CD TUNER
MUTE
CD
ALBUM
STANDBY-ON SOURCE VOLUME
-
+
BAND
O
P
E
N
/
C
L
O
S
E
PROG/CLOCK TUNING
SOURCE BAND TUNING
Select CD source.
Press OPEN•CLOSE on the top of the system to open the CD door.
Insert a disc with the printed side facing up and press down
on OPEN•CLOSE to close the CD door.
PressÉÅto start playback.
Press 9to stop playback.
Notes for the remote control:
– First, select the source you wish to
control by pressing one of the source select
keys on the remote control (CD or TUNER,
for example).
–Then select the desired function ( 2; ,
í , ë for example).
MCM138D_12 QUG_Eng_iPod 5/16/08, 16:483

Step B Enjoy
Playing iPod using the dock
1Select the correct dock adaptor supplied, then snap the adaptor into the dock connector (iPod) to provide a
snug fit for the player.
●The indication on the adaptor’s back fits specific iPod player.
2Correctly place your player in the dock connector.
3Connect the cables of the dock to DOCKING IN jacks on the main set correspondingly.
4Press SOURCE repeatedly or on the set (or DOCK on the remote) to select DOCK source.
●The connected player will play automatically.
●The iPod battery will be charged in either normal standby mode or power-on mode.
sd
Tip
Refer to the user manual supplied for detailed
descriptions of “Compatible portable players”,
“Selecting the correct dock adaptor”,“Installing
the dock adaptor”, and the important notes for
dock operation.
Dock cable
PDCC-JH-0820
CRoyal Philips Electronics N.V. 2008
All rights reserved.
http://www.philips.com
MCM138D_12 QUG_Eng_iPod 5/16/08, 16:484