Philips 109B7 User manual

Safety and Troubleshooting Information
Safety Precautions and Maintenance • Troubleshooting • Regulatory Information • Other
Related Information
Safety precautions and maintenance
RETURN TO TOP OF THE PAGE
Readand follow these instructionswhen connectingand using your computer monitor:
zDisconnect the monitor fromthe power supply if the monitor is not to be usedfor an
extended period oftime.
zDo not attempt to removethe back cover, as you will be exposed to a shock hazard. The
back cover should only beremoved by qualified service personnel.
zDo not place objects on top of the monitor cabinet, objects could fall into vents or cover
themand prevent proper cooling of the monitor's electronic devices.
zToavoid the risk of shock or permanent damageto the set, donot expose the monitor to
rain or excessive moisture.
zDo not use alcohol orammonia-based liquid to clean the monitor. If necessary, clean with
aslightly damp cloth. Disconnect the monitorfromthe power supply before cleaning.
zWhenpositioning the monitor, make sure the power plug and outlet are easily accessible.
zWhenusing the monitor,please make sure to install the swivel basefor safety concert.
Consult a service technician if the monitor does not operate normally whenoperating instructions
ofthis manual are followed.
WARNING: Use of controls, adjustments, or procedures other
than those specified in this documentation may result in
exposure to shock, electrical hazards, and/or mechanical
hazards.

About This Electronic User's Manual
About This Guide • Other Documents You May Need • Notational Descriptions
About This Guide
This electronic user's guide is intended for anyone who uses the Philips Color Monitor. It describes
the monitor's features, setup, operation and all other information, which is the same exact
information described in our printed version.
The sections are as follows:
●Safety and Troubleshooting Information provides tips and solutions for common problems,
and other related information you may need.
●About This Electronic User's Manual gives overview of what information are included as well
as notation icon descriptions and other documentation you can refer to.
●Product Information gives an overview of the monitor's features and as well as the technical
specifications for this monitor.
●Installing Your Monitor describes the initial setup process and gives an overview of how to
use the monitor.
●On Screen Display provides information on adjusting the settings on your monitor.
●Customer Care and Warranty is a list of worldwide Philips consumer information centers
along with the help desk phone numbers and information on the applicable warranty of your
product.
●Glossary provides more information for technical terms.
●Download allows users to install the entire manual on their hard drive.
●Frequently Asked Questions provides answers to commonly asked questions.
RETURN TO TOP OF THE PAGE
Other Documents You May Need
In addition to this Electronic User's Guide, you may need to refer to the following documentation:

●Philips Color Monitor Quick Start Guide which summarizes the steps for setting up the
monitor. This is included with this product.
RETURN TO TOP OF THE PAGE
Notational Descriptions
The following subsections describe notational conventions used in this document.
Notes, Cautions, and Warnings
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in
italic type. These blocks are notes, cautions, and warnings, and they are used as follows:
NOTE: This icon indicates important information and tips that help you make
better use of your computer system.
CAUTION: This icon indicates information that tells you how to avoid either
potential damage to hardware or loss of data.
WARNING: This icon indicates the potential for bodily harm and tells you how
to avoid the problem.
SMART HELP: This icon indicates helpful information when adjusting the On
Screen Display of your monitor.
Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such
cases, the specific presentation of the warning is mandated by regulatory authority.
RETURN TO TOP OF THE PAGE

©2006 Koninklijke Philips Electronics N.V.
All rights reserved. Reproduction, copying, usage, modifying, hiring, renting, public performance, transmission and/or
broadcasting in whole or in part is prohibited without written consent of Philips Electronics N.V.

Product Information
Product Features • Lead-free product • Technical Specifications • Automatic Power
Saving • Physical Specification • Pin Assignment • Product Views
Product Features
109B7/109F7:
z19-inch (18.0" VIS) Real Flat color monitor with excellent front of screen performance for use
with MACs and PCs
zAutoscan covers horizontal frequencies up to 86 kHz offering a maximum resolution of 1600 x
1200 with flicker free display of 1600 x 1200 at up to 65 Hz
zReal Flat High Contrast CRT with high-resolution 0.25 mm dot pitch (0.21 hdp)
zsRGB for true on screen color representation.
zFCC, CE (in selected countries only) and ISO9241, ISO14001 certified
RETURN TO TOP OF THE PAGE
Lead-free product
Philips eliminated toxic substances like lead from its displays. Lead-free display helps protect your
health and promotes environmentally sound recovery and disposal of waste from electrical and
electronic equipment. Philips complies with the European Community stringent RoHS Directive
mandating restrictions on hazardous substances in electrical and electronic equipment. With Philips,
you can be confident that your display device does not harm the environment.
Technical Specifications*
Model Regulation Color
109B70 TCO'03Grey
109B73 TCO'03 Silver/Black
109B75 TCO'03 Black
109F71 MPRII Grey
109F72 MPRII Silver/Black
109F76 MPRII Black
CRT
• Size and deflection 19 inch / 46 cm ; 90° deflection angle
• Dot pitch / Grille pitch 0.25 mm
• Horizontal pitch 0.21 mm
• Tube type Shadow mask, Real Flat, high contrast, high
brightness, anti-static, anti reflection
• Phosphor P22

* These information are subject to change without notice.
RETURN TO TOP OF THE PAGE
• Recommended display area 14.0" x 10.4" / 355 x 265 mm
SCANNING
• Horizontal scanning 30 - 86 KHz
• Vertical scanning 50 - 160 Hz
VIDEO
• Video dot rate 180 MHz
• Input impedance
- Video 75 ohm
- Sync 4.7 kOhm
• Input signal levels 0.7 Vpp
• Sync input signal Separate sync
• Sync polarities Positive and negative
WHITE COLOR TEMPERATURE
Chromaticity CIE coordinates:
• at 9300 degrees K x = 0.283 / y = 0.297
• at 6500 degrees K x = 0.313 / y = 0.329
• at 5500 degrees K x = 0.332 / y = 0.347
sRGB
sRGB is a standard for ensuring correct exchange of colors between different devices (e.g.
digital cameras, monitors, printers, scanners, etc.)
Using a standard unified color space, sRGB will help represent pictures taken by an sRGB
compatible device correctly on your sRGB enabled Philips monitors. In that way, the colors are
calibrated and you can rely on the correctness of the colors shown on your screen.
Important with the use of sRGB is that the brightness and contrast of your monitor is fixed to a
predefined setting as well as the color gamut. Therefore it is important to select the sRGB setting
in the monitor's OSD.
To do so, open the OSD by pressing the OK button on the front of your monitor. Use the down
button to go to Color temperature and press OK again. Then move the down button to go to
sRGB and press OK again.
Exit this OSD.
After this, please don't change the brightness or contrast setting of your monitor. If you change
either of these, the monitor will exit the sRGB mode and go to a color temperature setting of
6500K.

Automatic Power Saving
If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can
automatically reduce its power consumption when not in use. And if an input from a keyboard, mouse or
other input device is detected, the monitor will automatically "wake up". The following table shows the
power consumption and signaling of this automatic power saving features:
RETURN TO TOP OF THE PAGE
Physical Specifications
* These information are subject to change without notice.
RETURN TO TOP OF THE PAGE
Pin Assignment
The 15-pin D-sub connector (male) of the signal cable (IBM systems):
Power Management Definition
VESA's Mode Video H-sync V-sync Power Used Power
Saving (%) LED color
Active ON Yes Yes Typical 70W 0 % Green
Sleep OFF No No < 2W 99% Flashing
Green
Switch Off OFF -- -- < 2W 99% Off
• Dimensions 17.3" x 16.6" x 17.9" / 439 x 422.5 x 457mm
• Weight 22.9 kg
• Power supply 100-240 VAC, 60-50Hz
• Temperature
(operating) 0° to 40°C / 32° to 104°F
• Temperature (storage) -25° to + 60°C / -13° to +140°F
• Relative humidity
(storage) 5% to 95%
* Resolution 1024 x 768, standard size, contrast max., brightness 50%, 9300°, full white pattern.

RETURN TO TOP OF THE PAGE
Views
Follow the links to see various views of the monitor and its components.
Front View
Rear View
RETURN TO TOP OF THE PAGE
Pin
No. Assignment
Pin
No. Assignment
1Red video input 9+5V (Supply from PC for
DDC circuit)
2Green video input 10 Sync ground
3Blue video input 11 Ground
4Ground 12 Serial data line (SDA)
5Self test 13 H. Sync
6Red video ground 14 V. Sync
7Green video ground 15 Data clock line (SCL)
8Blue video ground

Installing your Monitor
Front View • Rear View
Front View
RETURN TO TOP OF THE PAGE
Rear View
Power button switches your monitor on.
OK button which when pressed will take you to the OSD controls
High Brightness hotkey.
Contrast hotkey. When the "-" button is pressed, the adjustment
controls for the CONTRAST will show up.
Brightness hotkey. When the "+" button is pressed, the
adjustment controls for BRIGHTNESS will show up.
"-" and "+" buttons, are used for adjusting the OSD of your
monitor.