Technical Specifications
LCD panel
• Type TFT LCD
• Screen size 19 inch/ 48.26 cm
• Pixel pitch 0.294 x 0.294 mm
• LCD panel type 1280 x 1024 pixels
R.G.B vertical stripe
Anti-glare polarizer, hard coated
• Effective viewing area 376.32 x 301.06 mm
• Display colors 16M colors
Scanning
• Vertical refresh rate 56~76 Hz
• Horizontal frequency 30~82 KHz
Video
• Video dot rate (Max.) 135 MHz
• Input impedance
- Video 75 Ohm
- Sync 2K Ohm
• Input signal levels 0.7 Vpp
• Sync input signal Separate sync
Composite sync
Sync on green
• Sync polarities Positive and negative
• Video interface Analog (D-Sub) input
Optical characteristics
• Contrast ratio 500 (typical)
• Brightness 250 cd/m2(typical)
• Peak contrast angle 6 o'clock
• White chromaticity x: 0.283 y: 0.297 (at 9300OK)
x: 0.313 y: 0.329 (at 6500OK)
• Viewing angle Upper 85O(typical)
(C/R >10) Lower 85O(typical)
Left 85O(typical)
Right 85O(typical)
• Response time 25ms (typical)
(Tr 15ms,Tf 10ms)
Resolution & preset modes
• Maximum 1280 x 1024 at 75 Hz
• Recommended 1280 x 1024 at 60 Hz
• User definable modes 15
• Factory preset modes 15
H.freq (KHz) V.freq (Hz)
640 x 350 31.5 70
720 x 400 31.5 70
640 x 480 31.5 60
640 x 480 35.0 67
640 x 480 37.5 75
800 x 600 35.2 56
800 x 600 37.9 60
800 x 600 46.9 75
832 x 624 49.7 75
1024 x 768 48.4 60
1024 x 768 60.0 75
1152 x 870 69.0 75
1152 x 900 71.8 76
1280 x 1024 63.9 60
1280 x 1024 80.0 75
(Interlace mode is not applicable)
Plug and play compatibility
• Display data channel DDC-CI (VESA)
• Microsoft Windows®Me/2000 & XP compatible
Power management
Complies with EPA Energy Star and NUTEK specifications
• Typical operation 40 W (typical)
• Sleep mode 1 W
Low-emission characteristics
• Complies with TCO '03, MPRII and prEN50279
(so called MPRIII) specifications
Monitor controls and functions
• Front Power on/off - Tact switch
OK - Tact switch
Auto - Tact switch
Up/Down - Tact switch
(Brightness)
Left/Right - Tact switch
• LED indicator Blue Power on
Amber Power saving/off mode
Flashing blue New mode
Connections and cables
• Connections on monitor body
- Video 15-pin D-sub (analog) and DVI-D
- Power IEC/CEE-22 type male power inlet
on monitor body
• Cables D-Sub video cable, power cord
Regulatory approvals
• TÜV/GS,TÜV-Ergo
• FCC-B, UL, CSA
• SEMKO
• prEN50279 Low Emission
• CE Mark
• NUTEK, Energy Star
• TCO '03
Physical specifications
•
Dim. incl. base (W x H x D)
425 x 377 x 235 mm
(in lowest position)
•
Dim. excl. base (W x H x D)
425 x 360 x 65 mm
• Tilt/swivel -5O-30O/ 175O
•
Height adjustment range
70 mm
• Weight 7 Kg (Net)
• Power supply 100 - 240 VAC, 50/60 Hz
• Power consumption 40 W* (typical)
• Temperature (operating) +5OC to +35OC
• Temperature (storage) -20OC to +60OC
• Relative humidity 20% to 80%
• System MTBF 50K hrs (excluding CCFL 40K hrs)
* Resolution 1280 x 1024, standard size, contrast maximum
brightness 50%, 9300OK, full white pattern
We recommend using 1280 x 1024 at 60 Hz non-interlaced mode
for the best picture quality
As an Energy Star partner, Philips has determined that this
product meets the Energy Star guidelines for energy efficiency.
Microsoft and Windows are registered trademarks of Microsoft
Corporation
Macintosh is a registered trademark of Apple Computer, Inc.
All data subject to change without notice
Release date: November 2003
www.philips.com
19" TFT LCD SXGA monitor 190B4CS
190B4CS
