Philips 109E5 User manual

electronic user's manual
file:///D|/EDFU/crt_19/edoc/english/109E/manual.html [5/26/2003 5:13:53 PM]

Safety and Troubleshooting Information
Safety Precautions and Maintenance • Troubleshooting • Regulatory Information • Other
Related Information
Safety precautions and maintenance
WARNING: Use of controls, adjustments, or procedures other than those
specified in this documentation may result in exposure to shock, electrical
hazards, and/or mechanical hazards.
Read and follow these instructions when connecting and using your computer monitor:
Disconnect the monitor from the power supply if the monitor is not to be used for an extended period
of time.
●
Do not attempt to remove the back cover, as you will be exposed to a shock hazard. The back cover
should only be removed by qualified service personnel.
●
Do not place objects on top of the monitor cabinet, objects could fall into vents or cover them and
prevent proper cooling of the monitor's electronic devices.
●
To avoid the risk of shock or permanent damage to the set, do not expose the monitor to rain or
excessive moisture.
●
Do not use alcohol or ammonia-based liquid to clean the monitor. If necessary, clean with a slightly
damp cloth. Disconnect the monitor from the power supply before cleaning.
●
When positioning the monitor, make sure the power plug and outlet are easily accessible.●
Consult a service technician if the monitor does not operate normally when operating instructions of this
manual are followed.
RETURN TO TOP OF THE PAGE
Safety & Troubleshooting
file:///D|/EDFU/crt_19/edoc/english/109E/SAFETY/SAFETY.HTM [5/26/2003 5:13:57 PM]

About This Electronic User's Manual
About This Guide • Other Documents You May Need • Notational Descriptions
About This Guide
This electronic user's guide is intended for anyone who uses the Philips Color Monitor. It describes the
monitor's features, setup, operation and all other information, which is the same exact information described
in our printed version.
The sections are as follows:
Safety and Troubleshooting Information provides tips and solutions for common problems, and other
related information you may need.
●
About This Electronic User's Manual gives overview of what information are included as well as
notation icon descriptions and other documentation you can refer to.
●
Product Information gives an overview of the monitor's features and as well as the technical
specifications for this monitor.
●
Installing Your Monitor describes the initial setup process and gives an overview of how to use the
monitor.
●
On Screen Display provides information on adjusting the settings on your monitor.●
Customer Care and Warranty is a list of worldwide Philips consumer information centers along with
the help desk phone numbers and information on the applicable warranty of your product..
●
Glossary provides more information for technical terms.●
Download allows users to install the entire manual on their hard drive.●
Frequently Asked Questions provides answers to commonly asked questions.●
RETURN TO TOP OF THE PAGE
Other Documents You May Need
In addition to this Electronic User's Guide, you may need to refer to the following documentation:
Philips Color Monitor Quick Start Guide which summarizes the steps for setting up the monitor. This
is included with this product.
●
RETURN TO TOP OF THE PAGE
Notational Descriptions
About This Electronic User's Manual
file:///D|/EDFU/crt_19/edoc/english/109E/ABOUT/ABOUT.HTM (1 of 2) [5/26/2003 5:13:58 PM]

The following subsections describe notational conventions used in this document.
Notes, Cautions, and Warnings
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic
type. These blocks are notes, cautions, and warnings, and they are used as follows:
NOTE: This icon indicates important information and tips that help you make better
use of your computer system.
CAUTION: This icon indicates information that tells you how to avoid either potential
damage to hardware or loss of data.
WARNING: This icon indicates the potential for bodily harm and tells you how to
avoid the problem.
SMART HELP: This icon indicates helpful information when adjusting the On Screen
Display of your monitor.
Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the
specific presentation of the warning is mandated by regulatory authority.
RETURN TO TOP OF THE PAGE
©2003 Koninklijke Philips Electronics N.V.
All rights reserved. Reproduction, copying, usage, modifying, hiring, renting, public performance, transmission and/or broadcasting in whole or in
part is prohibited without written consent of Philips Electronics N.V.
About This Electronic User's Manual
file:///D|/EDFU/crt_19/edoc/english/109E/ABOUT/ABOUT.HTM (2 of 2) [5/26/2003 5:13:58 PM]

Product Information
Product Features • Technical Specifications • Automatic Power Saving • Physical
Specification • Pin Assignment • Product Views
Product Features
109E5
19-inch (18.0" VIS) color monitor with excellent front of screen performance for use with MACs and
PCs
●
Autoscan covers horizontal frequencies up to 92 kHz offering a maximum resolution of 1920 x 1440
with flicker free display of 1280 x 1024 up to 86 Hz
●
Flat Square High Contrast CRT with 0.26 mm pitch (0.23 hdp)● XSD-Xtra Space Design for large screen display in a small footprint: 19-inch conventional monitor with
maximum depth of only 437 mm/17.2"
●
Multimedia Base option● sRGB for true on screen color representation.●
FCC, CE (in selected countries only) and ISO9241, ISO14001 certified ●
RETURN TO TOP OF THE PAGE
Technical Specifications*
CRT
• Size and deflection 19 inch / 46 cm ; 90° deflection angle
• Dot pitch 0.26 mm
• Horizontal pitch 0.23 mm
• Tube type Shadow mask, real flat, high contrast, anti-glare, anti-static, anti
reflection, light transmission 52%
• Phosphor P22
• Recommended display area 14.0" x 10.4" / 355 x 265 mm
• Maximum display area 14.4" x 10.8" / 365 x 270 mm
SCANNING
• Horizontal scanning 30 - 92 KHz
• Vertical scanning 50 - 160 Hz
109E Product Information
file:///D|/EDFU/crt_19/edoc/english/109E/PRODUCT/PRODUCT.HTM (1 of 4) [5/26/2003 5:13:58 PM]

VIDEO
• Video dot rate 158 MHz
• Input impedance
- Video 75 ohm
- Sync 2.2 kOhm
• Input signal levels 0.7 Vpp
• Sync input signal Separate sync
Composite sync
• Sync polarities Positive and negative
WHITE COLOR TEMPERATURE
Chromaticity CIE coordinates:
• at 9300 degrees K x = 0.283 / y = 0.297
• at 6500 degrees K x = 0.313 / y = 0.329
sRGB
sRGB is a standard for ensuring correct exchange of colors between different devices (e.g. digital
cameras, monitors, printers, scanners, etc.)
Using a standard unified color space, sRGB will help represent pictures taken by an sRGB compatible
device correctly on your sRGB enabled Philips monitors. In that way, the colors are calibrated and you
can rely on the correctness of the colors shown on your screen.
Important with the use of sRGB is that the brightness and contrast of your monitor is fixed to a
predefined setting as well as the color gamut. Therefore it is important to select the sRGB setting in the
monitor's OSD.
To do so, open the OSD by pressing the OK button on the front of your monitor. Use the down button to
go to Color temperature and press OK again. Then move the down button to go to sRGB and press OK
again.
Exit this OSD.
After this, please don't change the brightness or contrast setting of your monitor. If you change either of
these, the monitor will exit the sRGB mode and go to a color temperature setting of 6500K.
For more information on sRGB, please visit: www.srgb.com
* These information are subject to change without notice.
RETURN TO TOP OF THE PAGE
Automatic Power Saving
109E Product Information
file:///D|/EDFU/crt_19/edoc/english/109E/PRODUCT/PRODUCT.HTM (2 of 4) [5/26/2003 5:13:58 PM]

If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can
automatically reduce its power consumption when not in use. And if an input from a keyboard, mouse or
other input device is detected, the monitor will automatically "wake up". The following table shows the power
consumption and signaling of this automatic power saving features:
Power Management Definition
VESA's Mode Video H-sync V-sync Power Used Power
Saving (%) LED color
ON Active Yes Yes Typical 65W 0 % Green
OFF Blanked No No < 2W 97% Flashing
Green
This monitor is ENERGY STAR®compliant. As an ENERGY STAR®Partner, PHILIPS has
determined that this product meets the ENERGY STAR®guidelines for energy efficiency.
RETURN TO TOP OF THE PAGE
Physical Specifications
• Dimensions 17.3" x 17" x 17.2" / 440 x 433 x 437 mm (including base)
17.3" x 15" x 17.2" / 440 x 383 x 437 mm (excluding base)
• Weight 17.8 kg
• Power supply 90 - 264 VAC, 50/60Hz
• Temperature
(operating) 0° to 40°C / 32° to 104°F
• Temperature (storage) -25° to +65°C / -13° to +149°F
• Relative humidity
(storage) 5% to 95%
* Resolution 1280 x 1024, standard size, contrast max., brightness 50%, 9300°, full white pattern.
* These information are subject to change without notice.
RETURN TO TOP OF THE PAGE
Pin Assignment
109E Product Information
file:///D|/EDFU/crt_19/edoc/english/109E/PRODUCT/PRODUCT.HTM (3 of 4) [5/26/2003 5:13:58 PM]

The 15-pin D-sub connector (male) of the signal cable (IBM systems):
Pin
No. Assignment
Pin
No. Assignment
1 Red video input 9 No pin
2 Green video input 10 Logic ground
3 Blue video input 11 Identical output - connected
to pin 10
4Identical output - connected
to pin 10 12 Serial data line (SDA)
5 Ground 13 H. Sync / H+V
6 Red video ground 14 V. Sync (VCLK for DDC)
7 Green video ground 15 Data clock line (SCL)
8 Blue video ground
RETURN TO TOP OF THE PAGE
Views
Follow the links to see various views of the monitor and its components.
Front View
Rear View
RETURN TO TOP OF THE PAGE
109E Product Information
file:///D|/EDFU/crt_19/edoc/english/109E/PRODUCT/PRODUCT.HTM (4 of 4) [5/26/2003 5:13:58 PM]

Installing your Monitor
Front View • Rear View • 6G3B11 Multimedia Base (option)
Front View
Power button switches your monitor on.
OK button which when pressed will take you to the OSD controls
Contrast hotkey. When the "-" button is pressed, the adjustment controls
for the CONTRAST will show up.
Brightness hotkey. When the "+" button is pressed, the adjustment
controls for BRIGHTNESS will show up.
Installing your Monitor
file:///D|/EDFU/crt_19/edoc/english/install_6/INSTALL.HTM (1 of 3) [5/26/2003 5:13:58 PM]

"-" and "+" buttons, are used for adjusting the OSD of your monitor.
RETURN TO TOP OF THE PAGE
Rear View
Installing your Monitor
file:///D|/EDFU/crt_19/edoc/english/install_6/INSTALL.HTM (2 of 3) [5/26/2003 5:13:58 PM]

Power in - attach power cable here.1.
Video In - this is a cable which is already attached to your monitor. Connect the other
end of the cable to your PC.
2.
RETURN TO TOP OF THE PAGE
Installing your Monitor
file:///D|/EDFU/crt_19/edoc/english/install_6/INSTALL.HTM (3 of 3) [5/26/2003 5:13:58 PM]

On-Screen Display
Description of the On-Screen Display • The OSD Tree • The OSD Controls
Description of the On Screen Display
What is the On-Screen Display?
This is a feature in all Philips monitors which allows an end-user to adjust screen performance of monitors
directly through an on-screen instruction window. The user interface provides user-friendliness and
ease-of-use when operating the monitor.
Basic and simple instruction on the control keys.
On the front controls of your monitor, once you press the button, the On Screen Display (OSD) Main
Controls window will pop up and you can now start making adjustments to your monitor's various features.
Use the to make your adjustments within.
On-Screen Display
file:///D|/EDFU/crt_19/edoc/english/OSD_3/OSDDESC.HTM (1 of 4) [5/26/2003 5:13:59 PM]

RETURN TO TOP OF THE PAGE
The OSD Tree
Below is an overall view of the structure of the On-Screen Display. You can use this as reference when you
want to later on work your way around the different adjustments.
On-Screen Display
file:///D|/EDFU/crt_19/edoc/english/OSD_3/OSDDESC.HTM (2 of 4) [5/26/2003 5:13:59 PM]

On-Screen Display
file:///D|/EDFU/crt_19/edoc/english/OSD_3/OSDDESC.HTM (3 of 4) [5/26/2003 5:13:59 PM]

RETURN TO TOP OF THE PAGE
On-Screen Display
file:///D|/EDFU/crt_19/edoc/english/OSD_3/OSDDESC.HTM (4 of 4) [5/26/2003 5:13:59 PM]

Customer Care & Warranty
PLEASE SELECT YOUR COUNTRY/AREA TO READ THE WARRANTY COVERED:
WESTERN EUROPE: Austria • Belgium • Cyprus • Denmark • France • Germany • Greece •
Finland • Ireland • Italy • Luxembourg • the Netherlands • Norway • Portugal • Sweden •
Switzerland • Spain • United Kingdom
EASTERN EUROPE: Czech Republic • Hungary • Poland • Russia • Turkey • Bulgaria
LATIN AMERICA: Antilles • Argentina • Brazil • Chile • Colombia • Mexico • Paraguay • Peru
• Uruguay • Venezuela
NORTH AMERICA: USA & Canada (107E/X only) • USA & Canada (all other models)
PACIFIC: Australia • New Zealand
ASIA: Bangladesh • China • Hong Kong • India • Indonesia • Japan • Korea • Malaysia •
Pakistan • Philippines • Singapore • Taiwan • Thailand
AFRICA: Morocco • South Africa
MIDDLE EAST: Dubai • Egypt
Customer Care and Warranty
file:///D|/EDFU/crt_19/edoc/english/WARRANTY/WARRANTY.HTM [5/26/2003 5:13:59 PM]

Frequently Asked Questions
1. What does the "Designed for Windows" logo signify?
The "Designed for Windows" logo means your Philips monitor fulfills the requirements and
recommendations of the PC9x (97, 98, or 99) System Design Guide and passes stringent
WHQL tests.
2. What is USB?
Think of USB as a smart plug for PC peripherals. USB automatically determines resources (like driver software
and bus bandwidth) required by peripherals. USB makes necessary resources available without user
intervention. Its three main benefits are:
USB eliminates "Case angst," the fear of removing the computer case to install circuit board cards - that
often require adjustment of complicated IRQ settings -- for add-on peripherals.
●
USB does away with "port gridlock." Without USB, PCs are normally limited to one printer, two Com port
devices (usually a mouse and modem), one Enhanced Parallel Port add-on (scanner or video camera,
for example) and a joystick. More and more peripherals for multimedia computers come on the market
every day. With USB, up to 127 devices can run simultaneously on a computer.
●
USB permits "hot plug-in." No need to shut down, plug in, reboot and run set up to install peripherals. No
need to go through the reverse process to unplug a device. Bottom line: USB transforms today's
"Plug-and-Pray" into true Plug-and-Play!
●
3. What is a USB hub?
Think of USB hub as a extension of USB ports. Normally, the PC provides only one or two USB
ports. To connect additional USB devices, you need a USB hub.
4. What is Philips Monitors USB hub solution?
Increasingly, monitors include USB hub functionality. But not all users need or want a USB hub.
To give users freedom of choice, Philips provides an optional USB hub (type number
PCUH411). The USB hub consists of two parts that are normally connected: one is functional,
the other aesthetic. The aesthetic element is a removable cover. With the cover removed, the
USB hub can be attached to the base or pedestal of monitor. The attached USB hub can be
rotated to any position around the monitor's base. With this innovative Philips solution, your
USB hub is always within reach for convenient connection and disconnection of USB
peripherals.
6. What models are Mac compatible?
Frequently Asked Questions
file:///D|/EDFU/crt_19/edoc/english/FAQ.HTM (1 of 12) [5/26/2003 5:13:59 PM]

All listed Philips monitors are Mac compatible. BUT, you may need an adapter to connect the
monitor to your Mac system. Please contact your dealer/reseller for details.
7. What is TCO?
TCO is a Swedish abbreviation for the Swedish Confederation of Professional Employees.
8. What is MPR?
MPR is a Swedish abbreviation for the Swedish National Board of Measurement and Testing.
9. What are the differences between MPRII, TCO92, TCO95, TCO99 and TCO'03?
In the general hierarchy of standards, TCO'03/TCO99 is the highest level of certification. Next
is TCO95, which is "better" than TCO92, which, in turn, is better than MPRII. Below, we
compare the standards in each category.
-TCO 92 Phase out: June 30, 2000
-TCO 95 Will be end December 31, 2003
Emissions:
MPRII: Set low emission rules for visual displays.
TCO92: Imposed more stringent standards than MPRII.
TCO95: Further toughened TCO92 rules.
TCO99: Delineated even more severe standards and test procedures than TCO95.
TCO'03: Same as TCO99 standard + Testing uncertainty.
Safety:
MPRII: No requirement.
TCO92/95/99/03: All set requirements.
Energy Saving:
MPRII: No requirement.
TCO92: Standby mode < 30W, Off mode < 8W
TCO95: Standby mode < 30W, Off mode < 8W
Frequently Asked Questions
file:///D|/EDFU/crt_19/edoc/english/FAQ.HTM (2 of 12) [5/26/2003 5:13:59 PM]

TCO99: Standby mode < 15W, Off mode < 5W
TCO'03:Standby mode < 15W, Off mode < 5W
Visual Ergonomics:
MPRII: No requirement.
TCO92: No requirement.
TCO95: Set ergonomic rules including minimum contrast level, flicker and jitter.
TCO99: Tightened TCO95 rules.
TCO'03: Tighten TCO99 rule for CRT and new requirement of screen color for TFT LCD
Monitors.
Ecology:
MPRII: No requirement.
TCO92: No requirement.
TCO95: Set general ecological standards including recycling preparation, environmental policy
and environmental certification.
TCO99: Further tightened TCO95 norms.
TCO'03:Require the recycling information to users.
10. How do I enable the energy saving function?
Go to 'My Computer' and select 'Control Panel' followed by 'Monitor Control.' Select "All default
selection' and choose your Philips monitor model from the default driver list. Plug and Play will
automatically enable the EPA tick box for you. In DOS or Windows 3.1, you must first make
sure your PC supports power saving.
11. What is refresh rate?
"Refresh rate" describes the number of times an entire screen is vertically scanned each
second. In other words: If a monitor's refresh rate is 85 Hz, its screen is refreshed - or vertically
scanned - 85 times per second. A higher the refresh rate means better image stability and less
flicker. A high refresh rate helps users who work long hours in front of a monitor avoid eye
fatigue and stress. To change the refresh rate, go into "Start/Settings / Control Pannel / Display
/ Properties / Setting/Advance/Adaptor" Windows settings of the computer, the monitor will
automatically adjust itself to the video card.
Frequently Asked Questions
file:///D|/EDFU/crt_19/edoc/english/FAQ.HTM (3 of 12) [5/26/2003 5:13:59 PM]

12. Why does the picture on the screen appear to flicker?
A low refresh rate or electrical interference typically causes flickering in the picture. Possible
solutions include the following:
Verify that the proper drivers are installed for your video card● Make sure that all electrical devices (such as mobile phones) are at least 1m from the
monitor
●
Place the monitor in another physical location away from electrical interference● Adjust the refresh rate to 75hz or higher.●
13. How do I adjust my monitor's resolution?
Available resolutions are determined by the capabilities of your video card and graphic driver.
Under Windows '95, you may select the desired available resolution through the 'Display
properties/Settings' menu.
14. How can I adjust the size, position and rotation of my screen?
Depending on the model you own, you can use your CustoMax Software, On Screen Display
(OSD) or control knobs located on the monitor.
15. What if I get lost when making monitor adjustments?
Simply press OK button then select "Reset to factory settings" to restore all settings.
16. What is LightFrame™?
LightFrame™is a Philips technology breakthrough which offers a unique and revolutionary
solution for boosting a monitor 's brightness and sharpness. With LightFrameTM, the user
experiences TV quality performance for video or photos without deterioration to the monitor 's
performance in windows used for other applications.
Frequently Asked Questions
file:///D|/EDFU/crt_19/edoc/english/FAQ.HTM (4 of 12) [5/26/2003 5:13:59 PM]