Philips 10BDL3051T User manual

PHILIPS 10BDL3051T
V1.00
User Manual (English)

Safety Instructions
This electronic user guide is intended for anyone who uses the Philips monitor. Take time to read this user
manual before you use your monitor. It contains important information and notes regarding operating your
monitor. The Philips guarantee applies provided the product is handled properly for its intended use, in
accordance with its operating instructions and upon presentation of the original invoice or cash receipt,
indicating the date of purchase, dealers name and model and production number of the product.
Warnings
Use of controls, adjustments or procedures other than those specified in this documentation
may result in exposure to shock, electrical hazards and/or mechanical hazards. Read and
follow these instructions when connecting and using your computer monitor.
Operation
• Keep the monitor out of direct sunlight and away from stoves or any other heat source.
• Remove any object that could fall into ventilation holes or prevent proper cooling of the monitor‟s electronics.
• Do not block the ventilation holes on the cabinet.
• When positioning the monitor, make sure the power plug and outlet are easily accessible.
• If turning off the monitor by detaching the power cable or DC power cord, wait for 6 seconds before attaching
the power cable or DC power cord for normal operation.
• Please use approved power cord provided by Philips all the time. If your power cord is missing, please
contact
with your local service center. (Please refer to Customer Care Consumer Information Center)
• Do not subject the monitor to severe vibration or high impact conditions during operation.
• Do not knock or drop the monitor during operation or transportation
Maintenance
To protect your monitor from possible damage, do not put excessive pressure on the LCD panel. When
moving your monitor, grasp the frame to lift; do not lift the monitor by placing your hand or fingers on the LCD
panel.
Unplug the monitor if you are not going to use it for an extensive period of time.
Unplug the monitor if you need to clean it with a slightly damp cloth. The screen may be wiped with a dry
cloth when the power is off. However, never use organic solvent, such as, alcohol, or ammonia-based liquids
to clean your monitor.
To avoid the risk of shock or permanent damage to the set, do not expose the monitor to dust, rain, water,
or excessive moisture environment.
If your monitor gets wet, wipe it with dry cloth as soon as possible.
If foreign substance or water gets in your monitor, please turn the power off immediately and disconnect
the power cord. Then, remove the foreign substance or water, and send it to the maintenance center.
Do not store or use the monitor in locations exposed to heat, direct sunlight or extreme cold.
In order to maintain the best performance of your monitor and use it for a longer lifetime, please use the
monitor in a location that falls within the following temperature and humidity ranges.
Temperature: 0-40°C 32-95°F
Humidity: 10-85% RH

IMPORTANT:
Always activate a moving screen saver program when you leave your monitor unattended.
Always activate a periodic screen refresh application if your monitor will monitor unchanging static content.
Uninterrupted monitor of still or static images over an extended period may cause “burn in”, also known
as“after-imaging” or “ghost imaging”, on your screen. “Burn-in”, “after-imaging”, or “ghost imaging” is a
well-known phenomenon in LCD panel technology. In most cases, the “burned in” or “after-imaging” or “ghost
imaging” will disappear gradually over a period of time after the power has been switched off.
Warning
Severe” burn-in” or “after-image” or “ghost image” symptoms will not disappear and cannot be repaired. The
damage mentioned above is not covered under your warranty.
Service
* The casing cover should be opened only by qualified service personnel.
* If there is any need for any document for repair or integration, please contact with your local service center.
(Please refer to the chapter of “Consumer Information Center”)
* For transportation information, please refer to “Technical Specifications”.
* Do not leave your monitor in a car/trunk under direct sun light.
Note
Consult a service technician if the monitor does not operate normally, or you are not sure what procedure to
take when the operating instructions given in this manual have been followed.
Europe –EU Declaration of Conformity
This device complies with the essential requirements of the Radio Equipment Directive (2014/53/EU). The
following test methods have been applied in order to prove presumption of conformity with the essential
requirements of the Radio Equipment Directive(2014/53/EU):
- EN60950-1
Safety of information Technology Equipment
- EN62311
Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic
fields(0HZ-300GHz)
-EN 300328(For 802.11b/g/n)
Electromagnetic compatibility and Radio spectrum Matters(ERM); Wideband Transmission systems; Data
transmission equipment operating in the 2.4GHz ISM band and using spread spectrum modulation techniques;
Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive.
-EN301489-17
Electromagnetic compatibility and Radio spectrum Matters(ERM); Electromagnetic Compatibility(EMC)
standard for radio equipment and services; Part 17:Specfic conditions for 2.4GHz wideband transmission
systems and 5GHz high performance RLAN equipment
-EN301489-1
Electromagnetic compatibility and Radio spectrum Matters(ERM); Electromagnetic Compatibility(EMC)

standard for radio equipment and services; Part 1:Common technical requirements
This product has been tested and found to comply with the harmonized standards for information Technology
Equipment, these harmonized standards published under Directives of Official Journal of the European Union.
Warning:
This equipment is compliant with Class A of EN55032. In a residential environment this equipment may cause
radio interference.
ESD Warnings:
When user close to the monitor may cause the equipment discharge and reboot to monitor of main menu.
Federal Communications Commission (FCC) Notice (U.S. Only)
NOTE: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and , if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Use only an RF shielded cable that was supplied with the monitor when connecting this monitor to a computer
device.
To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or excessive
moisture.
USA:
WARNING: Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/panel PC technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Canada:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
FCC, IC& CE RF Radiation Exposure Statement Caution: To maintain compliance with the FCC, IC& CE‟s RF
exposure guidelines, place the product at least 20cm from near by persons.
Le présent document IC, FCC brouilleur fixaient un rayonnement incontrôlée. Installation et mise en œuvre
de ce matériel devrait avec échangeur distance minimale entre 20cm & ton corps.
The suitable temperature for the Colour Monitor and accessories is 0℃-45℃.
Adaptor with ferrite must be used with this equipment to ensure
compliance with the Class A FCC limits.
Power Adapter information:
Model No.: KSASB0241200150D5
INPUT: 100-240V~50/60Hz 0.6A
OUTPUT: 12V 1.5A

Waste Electrical and Electronic Equipment-WEEE
Attention users in European Union private households
Correct Disposal of this product. This marking indicates that this product should not be disposed
with other household wastes throughout the EU. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use the return and
collection systems or contact the retailer where the product was purchased. They can take this
product for environmental safe recycling.
Attention users in United States:
Please dispose of according to all Local, State and Federal Laws. For the disposal or recycling information,
contact www.,mygreenelectronics.com or www. eiae.org.
End of Life Directives-Recycling
Your new Public Information Monitor contains several materials that can be recycled for new
users.
Please dispose of according to all Local, State, and Federal laws.

Contents
1.Unpacking and Introduction ..............................................................................................................................1
1.1. Unpacking..............................................................................................................................................1
1.2. Package contents..................................................................................................................................1
1.3. Installation..............................................................................................................................................1
2. Physical view and features...............................................................................................................................3
2.1 Front View...............................................................................................................................................3
2.2 Top View .................................................................................................................................................3
2.3 Rear View...............................................................................................................................................4
2.4 IO Port ....................................................................................................................................................5
3. Operation..........................................................................................................................................................6
3.1 Setup wizard...........................................................................................................................................6
3.1.1 Setup wizard flow:........................................................................................................................6
3.1.2 Welcome......................................................................................................................................6
3.1.3 Network Setting............................................................................................................................7
3.1.4 Signage Display Settings.............................................................................................................8
3.1.5 Clone Media Files into internal ....................................................................................................9
3.1.6 Setup Complete ...........................................................................................................................9
3.2 Android Launcher ...................................................................................................................................9
3.2.1. Platform launcher........................................................................................................................9
3.2.2. Admin mode:...............................................................................................................................9
3.3 Setting menu.........................................................................................................................................11
3.3.1 Setting........................................................................................................................................11
3.3.2 Wi-Fi...........................................................................................................................................11
3.3.3 Ethernet......................................................................................................................................11
3.3.4 Bluetooth....................................................................................................................................12
3.3.5 More...........................................................................................................................................12
3.3.6 Signage Display.........................................................................................................................12
3.3.7 System Tools..............................................................................................................................24
3.3.8 Sound.........................................................................................................................................26
3.3.9 Display .......................................................................................................................................26
3.3.10 HDMI........................................................................................................................................27
3.3.11 Storage.....................................................................................................................................28
3.3.12 Apps.........................................................................................................................................28
3.3.13 Language.................................................................................................................................28
3.3.14 Date & Time .............................................................................................................................28
3.3.15 Developer options....................................................................................................................29
3.3.16 About........................................................................................................................................29
3.3.17 Appendix ..................................................................................................................................29
4. USB device compatibility................................................................................................................................32
5. Cleaning and Troubleshooting .......................................................................................................................33

5.1. Cleaning...............................................................................................................................................33
5.2 Troubleshooting....................................................................................................................................34
6. Technical Data................................................................................................................................................34
6.1 Specifications........................................................................................................................................34
6.2. Disclaimer............................................................................................................................................35

10BDL3051T
1
1.Unpacking and Introduction
1.1. Unpacking
* This product is packed in a carton, together with the standard accessories.
* Any other optional accessories will be packed separately.
* After opening the carton, ensure that the contents are complete and in good condition.
1.2. Package contents
Color Monitor
Quick Start Guide
USB Cable
HDMI Cable
Silicon
Foot
Stand Bar
DC Power adapter
Power Plug
(Provide by regions)
* Differences according to regions.
* Monitor design and accessories may differ from those illustrated above.
1.3. Installation
Securing the power and network cable
1 Insert power plug
2 Securing Micro SD card: Insert SD card bracket

10BDL3051T
2
Installing the table stand
Step1 Release the back cover screw to release back cover.
Step2 Open the back cover with disassemble tool.
Step3 Separate the back cover from main device.
Step4 Stick the silicon gaskets on back cover.
Step5 Install back cover thread head height not exceed 3mm.
Step6 Route power and network cable from bottom, insert signboard before mount signboard on back cover.
Mounting and installation
Mounting Option 1: [VESA mount] f
Supporting VESA standard: VESA MIS-D75 (75*75mm)
Supporting screw: M4*4mm (exclude the mounting plate thickness)
Mounting Option 2: [Using back cover]
Supporting screw: Self-tapping screw*3pcs(exclude the mounting plate thickness)
Simply screw the supplied table stand onto the stand screw hole.
Landscape Portrait

10BDL3051T
3
2. Physical view and features
2.1 Front View
①Front Camera
2M
②RGB LED(Left & Right)
Default: OFF
Use SICP to turn On and set RGB
2.2 Top View
①②③④
①- ②[Host USB]
Micro USB, Support USB external device.
③Expansion Port(Reserved)
④Micro USB
Support ADB data transmission, don't support OTG.
①
②

10BDL3051T
4
2.3 Rear View
①[Menu] Button
②[Volume +/-]
Volume up and down
Key
Function
Menu + Volume-
Launch Admin mode app
Menu + Volume+
Launch Quick Information app
Menu + Menu + Volume+ + Volume- +
Volume- + Volume+
Enable touch function
Menu + Menu + Volume- + Volume-
Turn on the screen
③[Stand screw hole]
④[Reset] Button
Factory Reset
⑤[Speaker Hole]
⑥[WESA mount]
Screw spec:M4
⑦[Wall Mount Screw Hole]
⑦
⑥
③
④
⑤
②
①

10BDL3051T
5
2.4 IO Port
①②③④⑤⑥⑦⑧
①[Ear jack]
3.5mm Ear Jack(CTIA standard) with mic in
②[HDMI OUT]
HDMI video/audio output
③[LED]
power on --> LED change to yellow after 5s --> LED change to Green when PHILIPS LOGO appear.
④+⑥[Micro USB]
Support USB external device.
⑤[Micro SD]
Connect your Micro SD card.
⑦[LAN]
* LAN control function for the use of remote control signal from control center.
* PoE+(power over Ethernet): 24W
Status
Green
Yellow
NC
OFF
OFF
10Mbps
ON (Flicker)
OFF
100Mbps
ON (Flicker)
ON
⑧[DC 12V]
Switch the AC adapter on/off

10BDL3051T
6
3. Operation
3.1 Setup wizard
3.1.1 Setup wizard flow:
Android Setup Wizard
PS:
(1)The default of Navigation bar is “enable”. You
can see it through all setup wizard flow.
(2)Only the 1st time you enter Android mode will go
to setup wizard.
(3)Do Factory reset in Android mode, it will run
setup wizard again.
Switch forward/backward among pages
(1) Welcome
Start: Network Settings
(2) Network Settings
Back Page: Welcome
Next Page: Wireless / Ethernet
Skip Page: Signage Display Settings
(2-1) Sub Page
Wi-Fi
Back Page: Network Settings
Next Page: Signage Display Settings
Ethernet
Back Page: Network Settings
Next Page: Signage Display Settings
(3) Signage Display Settings
Back Page: Network Settings
Next Page: Import from SD / Import from USB /
Manual Setup
Skip Page: Clone Media Files into internal
(3-1) Manual Setup
Back Page: Signage Display Settings
(4) Clone Media Files into internal
Back Page: Signage Display Settings
Next Page: Setup Complete
Skip Page: Setup Complete
(5) Setup Complete
Finish: go to boot on source.
3.1.2 Welcome
Select the language and click “Start” to start
settings.
The default of the Navigation bar is “enable”. So
you can see it in the bottom.
Welcome
(Select Language)
Network Setting
(Select Wireless or Ethernet)
Signage Display Settings
(Select Import Type)
Setup Complete
Clone Media Files into internal
(Select Clone Type)
General Information
SmartCMS
Clone Media Files into internal
(Select Clone Type)
Signage Display Settings
(Select Import Type)
Clone Media Files into internal
(Select Clone Type)
Remote Control
Welcome
(Select Language)
Network Setting
(Select Wireless or Ethernet)
Signage Display Settings
(Select Import Type)
Network Settings
(Select Wireless or Ethernet)

10BDL3051T
7
(1) Support Language
We support 18OSD languages.
No
Support Language
1
ENGLISH
2
GERMAN
3
SIMPLIFIED CHINESE
4
FRENCH
5
ITALIAN
6
SPANISH
7
RUSSIAN
8
POLSKI
9
TURKISH
10
TRADITIONAL CHINESE
11
JAPANESE
12
PORTUGUESE
13
ARABIC
14
DANISH
15
SWEDISH
16
FINNISH
17
NORWEGIAN
18
DUTCH
3.1.3 Network Setting
You can choose the network source: Wi-Fi or
Ethernet.
Then click “Next” to finish the network setting. Or,
you can click “Skip” to skip network setting.
PS: If you did not connect Ethernet cable, it will
show “Network cable is not plugged.” If you choose
and click “Next”.
(1)Wireless
When connecting to Wi-Fi, it will lead you to next
page automatically: Signage Display Settings
(2) Ethernet
When you enter “Ethernet” mode, it will show:
Connection Type：2 options: DHCP and Static IP
IPAddress (Only in Static IP mode)
Netmask (Only in Static IP mode)
DNS Address (Only in Static IP mode)
Gateway (Only in Static IP mode)
Finish the setting and click “Next”, it will lead you to
next page: Signage Display Settings
(1) DHCP
In DHCP mode, it will show related information
about current connection.
(2) Static IP

10BDL3051T
8
In Static IP mode, the user can set IP Address,
Netmask, DNS Address, and Gateway manually.
3.1.4 Signage Display Settings
The user can choose to import Database or setup
manually.
You can click “Skip” if you do not want to run this
page.
PS:(1) Database needs to put in the “Philips” folder
in SD or USB drive.
(2) Databasefile name should be “settings.db”
(1) Import Signage Display Settings from SD
Import Database from SD card, it will jump to the
page: 5 Clone Media Files into internal .
PS: If the Database is imported successfully, you
need to re-boot the display.
(2) Import Signage Display Settings from USB
Import Database from USB drive, it will jump to the
page: 5 Clone Media Files into internal .
PS: If the Database is imported successfully, you
need to re-boot the display.
(3) Manual Setup
If you choose manual setup, you need to setup
some items:
* General Information
* SmartCMS
* Remote Control
When you finish setup, it will jump to the page: 5
Clone Media Files into internal .
PS: Ne need to re-boot after setup.
General Information
It will show the default Signage Display name, but
the user can change to other name.
You can click “Skip” if you do not want to change
the name.
PS: If the name is blank, you can not click “Next” to
go to next page.
SmartCMS
The user can setup the SmartCMS Server, Account,
and PIN Code.
You can also click “Skip” to skip this setting.
PS: If no data entered, you can not click “Next” to
go to next page.
Remote Control
You can choose to enable or disable the Remote
Control function. And you can set the Server
address.
You can click “Skip” to skip this setting.
PS: If no data entered, you can't click “Next” to go
to next page.

10BDL3051T
9
3.1.5 Clone Media Files into internal
(1) Clone media files from SD
After cloning, it will jump to 6.1 Import Clone Data .
(2) Clone media files from USB
After cloning, it will jump to 6.1 Import Clone Data .
3.1.6 Setup Complete
When you click “Finish”, it will start “Import” or
“Clone Data”.
If it runs “Import”, it will show 6.1 Import Clone
Data .
Otherwise it will show 6.2 Manual Setup Complete .
PS: Do not power off during “Import” and “Clone”
processes, otherwise it will cause data loss.
(1) Import Clone Data
Click “Finish”, run “Import data”, it will re-boot
automatically.
(2) Manual Setup Complete
After finishing manual setup, you can enter Admin
Mode to change settings in the future if necessary.
3.2 Android Launcher
3.2.1. Platform launcher
Platform launcher is black page as below:
By pressing back key you can exit the app, the
screen will go to platform launcher.
3.2.2. Admin mode:
You can press “Menu + V-” to enter Admin mode.
Admin mode will show 4 icons: “Settings”, “Apps”,
“Network” and “Help”.
When you exit from Admin mode, the system will go
back to boot on source.

10BDL3051T
10
(1)First, you must enter password. The default
password is “1234”. If you want to change
password, you must go to Settings. “Signage
Display” -> “Change the Administrator Password”.
(2)Home page of Admin mode.
This page has 4 items: “Settings”, “Apps”, “Network”
and “Help”.
Settings : go to settings app.
Applications : show all existing apps.
Network : set wifi or ethernet.
Help : display QRcode.
(3) Applications page:
(4) Network page:
(5) Wi-Fi page:
(6) Ethernet page:
(7) Help page:
Display QR code page.

10BDL3051T
11
3.3 Setting menu
3.3.1 Setting
Main items in the Setting menu:
(1) Wi-Fi
(2) Ethernet
(3) Bluetooth
(4) More
(5) Signage Display
(6) System Tools
(7) Sound
(8) Display
(9) HDMI
(10) Storage
(11) Apps
(12) Language
(13) Date & time
(14) Developer options
(15) About
3.3.2 Wi-Fi
You can Enable or Disable Wi-Fi.
After enabling, it will show all available Wi-Fi
routers.
PS: When Wi-Fi is enabled and connected,
Ethernet will be disabled automatically.
3.3.3 Ethernet
You can Enable or Disable Ethernet.
After enabling Ethernet, it will show:
(1) Connection Type (2 options: DHCP / Static IP)
* DHCP
* Static IP
* IP Address
* Netmask
* DNS Address
* Gateway
(2) Mac Address
PS: When enabling Ethernet and connecting to the
network, Wi-Fi will be disabled automatically.
DHCP
In DHCP mode:
(1) Can't setup IP Address, Netmask, DNS Address,
and Gateway。
(2)If connected, it will show current network
configuration.

10BDL3051T
12
Static IP
In Static IP mode, the user can enter IP Address,
Netmask, DNS Address, and Gateway manually.
PS: Format of IP Address, Netmask, DNS Address,
and Gateway Address:
* Numbers: 0-9
* Decimal point “.”
3.3.4 Bluetooth
You can switch OFF or ON Bluetooth.
After switching ON, it will show the device name
and all available devices.
3.3.5 More
Setup Tethering & portable hotspot
Setup Bluetooth tethering
* Enable : Sharing this Signage Display‟s Internet
connection.
* Disable : Not sharing this Signage Display‟s
Internet connection.
3.3.6 Signage Display
There are 4 different groups: General Settings /
Server Settings / Source Settings / Security
(1) General Settings
* Signage Display Name
* Monitor ID
* Boot Logo
* Boot on source
* Schedule
* Screenshot
(2) Server Settings
* Email Notification
* FTP
* Remote Control
(3) Source Settings
* Media Player
* Browser
* SmartCMS
* PDF Player