Philips BDL4251VS User manual

Addendum BDL4251VS
www.philips.com/welcome
User Manual (English)

User Manual BDL4251VS, Addendum to User Manual BDL4251V
1
User Manual BDL4251VS, Addendum to User Manual BDL4251V
The User Manual for the BDL4251VS, autostereoscopic 3D display, consists of the User Manual for the
BDL4251V and this Addendum. This addendum states the deviations in the manual of the BDL4251VS
compared to the BDL4251V. If not described in this addendum functionality and working of the BDL4251VS is
the same as the BDL4251V.

User Manual BDL4251VS, Addendum to User Manual BDL4251V
2
TABLE OF CONTENTS
Contents ...............................................................................................................................................................3!
Connection & Button Overviews...........................................................................................................................3!
Setup Procedure & Connecting a PC ...................................................................................................................4!
Install the LCD Monitor in Portrait Mode...............................................................................................................5!
OSD Menu............................................................................................................................................................5!
Specifications .......................................................................................................................................................5!

User Manual BDL4251VS, Addendum to User Manual BDL4251V
3
Contents
In the BDL4251VS monitor pack is additionally included:
•BDL4251VS Quick Installation Guide is
•DVI-D cable
Connection & Button Overviews
The BDL4251VS has two additional components mounted at the back of the display (both encircled in red in the
picture below). The grey box at the right hand side is the Dimenco Rendering Core Premium, which is required
to render 2D-plus-Depth input into a full 3D multiview signal. The black box at the bottom center is the power
supply for the rendering box.
The BDL4251VS can only visualize in 3D when the appropriate signal (2D-plus-Depth) is sent to the display via
the rendering box. In other words, putting a video signal directly on one of the video inputs on the terminal panel
of the display will not result in a 3D picture.
The BDL4251VS is equipped with a Dimenco Rendering Core Premium, which can perform real-time multi-view
rendering of stereo (L+R) content (next to 2D-plus-Depth). The real-time stereo to auto-stereo conversion can
be enabled via an online license mechanism. More information can be found at
http://www.dimencodisplays.com/software/ (Real-time conversion License).

User Manual BDL4251VS, Addendum to User Manual BDL4251V
4
Setup Procedure & Connecting a PC
Connecting to an external PC:
1. Connect the provided DVI cable to the open DVI port on the blue rendering box at the backside of the
display (positioned at the blue area in the picture) and to a PC with the following minimum requirements:
•2 GHz processor,
•an NVidia graphics card (not combined with other type of graphics chips), resolution 1920x1080,
•DVI, HDMI or DisplayPort output (for the latter 2 a converter plug is not included),
•Windows XP or Windows 7 (preferred).
2. Audio can be connected as described in the BDL4251V manual. For accessing some audio inputs it may be
required to temporarily shift the additional power supply, connect the audio plug and reposition the power
supply.
3. Install the Dimenco 3D Player and Control Tool that can be downloaded from:
ftp://ftp.dimenco.eu/
User: DimencoSoftware
Password: playeranddct
Manuals for the Dimenco 3D Player and Control Tool can be downloaded from the same ftp.
4. Optionally download some sample clips from:
ftp://ftp.dimenco.eu/
User: Dimencoguest
Password: 3dconversion
5. Play out the content with the Dimenco Player and control the visualization settings with the Control Tool.
In case there are problems with either the Dimenco 3D Player or Control Tool, please refer to the respective
manuals.
A very important note:
The grey rendering box attached to the back of the display is specific for the panel and cannot be
interchanged for a rendering box of another display (even with the same product number). For this
reason the rendering box (positioned at the blue area in the picture below) has a serial number that is also
mentioned on a label (positioned at the bottom red area in the picture below) on the backside of the display.

User Manual BDL4251VS, Addendum to User Manual BDL4251V
5
Install the LCD monitor in portrait mode
The BDL4251VS in 3D mode cannot be used in portrait orientation; i.e. no 3D image will be visible upon using
the display in portrait mode.
OSD Menu
For optimal 3D picture quality the sharpness of the display should be set at level 41 (see page 28 of the
BDL4251V User Manual). This sharpness value is already preset, but can be checked and altered via the OSD
menu. The OSD menu can be accessed via the control panel at the backside of the display or via the remote
control.
Specifications
3D Technology
3D display type
Autostereoscopic, Fixed Lenticular
Number of views
28
3D viewing angle
150 degrees
3D input format
2D-plus-Depth
Multiview rendering
Dimenco rendering core
General
Set dimensions (W x H x D)
968 x 559 x 132 mm
Set dimensions in inch (W x H x D)
38.1 x 22 x 5.2
Product weight
37 kg / 81.6 lb
Note: Technical specifications are subject to change without notice

2013 © Koninklijke Philips Electronics N.V. All rights reserved.
Philips and the Philips Shield Emblem are registered trade marks of
Koninklijke Philips Electronics N.V. and are used under license
from Koninklijke Philips Electronics N.V.
Specifications are subject to change without notice.