Philips BDL4651VH/00 User manual

POWER
SMART
VIDEO
SOURCE
PIP
INPUTON/OFF CHANGE
BRIGHTNESSCONTRAST
DISPLAY
AUTO
ADJUST
MUTE
VOL UP
VOL DOWN
EXIT
MENU
SET
AUDIO
SOURCE
BDL4651VH
Remove the LCD display from the box and place the display face-down on a
soft, smooth surface, such as a newspaper, sheet or PE bag.
For wall mounting, please see next page.
Connect the power cable, as well as any A/V cable needed, and switch the
LCD display on.
BDL4651VH
LCDDisplay
BDL4651VH
LCD Display

BDL4651VH
4J.1FJ01.001
The remote control sensor should be on the left side
when rotating your display.
When mounting the LCD display on the wall, please consult a professional technician to
ensure correct installation.
In the event of any queries, please consult your dealer or service center.
LCD Display
Der Fernbedienungssensor sollte sich an der linken Seite befinden,
wenn Sie das Display drehen.
El sensor del mando a distancia deberá estar en el lado izquierdo
cuando gire la pantalla.
Le capteur de la télécommande doit être sur le côté gauche lors
de la rotation de votre moniteur.
Il sensore del telecomando deve trovarsi sul lato sinistro quando
si ruota lo schermo.
Podczas obracania monitora czujnik pilota powinien znajdować
siępo lewej stronie.
При повороте дисплея датчик ИК-приемника должен
находиться слева.
Uzaktan kumanda sensörü, ekranınızı döndürürken sol tarafta
olmalıdır.
ᮟ䕀ᰒ⼎఼ᯊˈ䘹᥻Ӵᛳ఼ᑨԡѢᎺջDŽ