Philips BDL5231VS User manual

Philips
3D Display
132 cm (52")
Autostereoscopic 3D Full HD
BDL5231VS
Experience stunning 3D images
with the 3D 132 cm (52") LCD display
Create and deliver the most eye catching content with the autostereoscopic 3D display.
Your audience will be left breathless at the stunning picture quality and superb depth, all
without the need for special glasses.
Operational flexibility
• Autostereoscopic 3D
• Smart insert in the backcover to place a small pc
Optimized for public viewing
• Full HD LCD display, 1920x1080p
• Slim bezel design for a stylish look
• High brightness for clearer images
Lower total cost of ownership
• SmartPower for energy saving
• Advanced anti image sticking function
Sustainable and safe
• Complies with RoHS standards to care for the environment

BDL5231VS/00
Highlights
3D Display
132 cm (52") Autostereoscopic 3D Full HD
Full HD LCD display 1920x1080p
This display has a resolution that is referred to
as Full HD. The state-of-the-art LCD screen
technology has the full high-definition
widescreen resolution of 1080 progressive lines,
each with 1920 pixels. This allows the best
possible picture quality for HD input signals with
up to 1080 lines. It produces brilliant flicker-free
progressive scan pictures with optimum
brightness and superb colors. This vibrant and
sharp image will provide you with an enhanced
viewing experience.
Slim bezel
A slim bezel design adds a stylish look to a public
display to nicely blend in most environments.
Furthermore this design is ideal for tiled matrix
video walls.
Advanced anti image sticking
Static images left on-screen for extended
periods of time may leave a "ghost image" or
image sticking effect on LCD displays. Although
image sticking in LCD displays is not permanent,
you want to prevent this to happen, especially in
locations where content is shown 24/7.
Compliant with RoHS standards
Philips designs and produces display products in
compliance with strict Restriction of Hazardous
Substances (RoHS) standards that restrict lead
and other toxic substances that can harm the
environment.
Autostereoscopic 3D
Enjoy a stunning 3D experience with no need for
special glasses thanks to the autostereoscopic
3D effect. Using lenticular technology, it gives
excellent clarity and depth, making your 3D
experience even more lifelike and enjoyable.
Smart insert
Professional PC's are part of most public signage
installations. Quite often they add additional
depth to the public display and a lot of cable
clutter. This public display contains a Smart
insert in the backcover that will fit many
professional small form factor PC's. In addition it
offers provisions for efficient cable management.
High brightness
Enjoy a clearer image in areas with greater
ambient brightness thanks to the 700 nit panel.
Your audience can enjoy better image quality in
locations that are away from direct sunlight yet
still brighter than average, optimizing the
viewing experience.
VIDIWALL
P
O
R
T
R
A
I
T

BDL5231VS/00
Specifications
3D Display
132 cm (52") Autostereoscopic 3D Full HD
Picture/Display
• Display screen type: LCD Full HD W-UXGA Act.
matrix
• Aspect ratio: 16:9
• Diagonal screen size: 52 inch / 132 cm
• Optimum resolution: 1920 x 1080 @ 60Hz
• Brightness: 700 cd/m²
• Contrast ratio (typical): 2000:1
• Response time (typical): 8 ms
• Pixel pitch: 0.6 x 0.6 mm
• Display colors: 16.7 million
• Viewing angle (H / V): 150 / 150 degree
• Horizontal Scanning Frequency: 31.5 - 91.1 kHz
• Vertical Scanning Frequency: 58 - 85 Hz
Supported Display Resolution
•Computer formats
Resolution Refresh rate
1920 x 1080 60Hz
•Video formats
Resolution Refresh rate
1080p 60Hz
Connectivity
• PC: DVI-D x1
Convenience
• VESA Mount: MIS-F 400x400mm (Set), MIS-D
100x100mm (Smart insert)
• Placement: Landscape
Power
• Mains power: 90-264 VAC, 50/60 Hz
• Consumption (On mode): Typ. 235W
• Standby power consumption: < 1W
Dimensions
• Set dimensions (W x H x D):
1209 x 705.5 x 138 mm
• Set dimensions in inch (W x H x D):
47.59 x 27.77 x 4.85 inch
• Set dimensions with stand (H x D): 751 x 406 mm
• Set dimensions with stand in inch (H x D):
29.57 x 15.95 inch
• Smart insert (WxHxD): 160 x 300 x 55 mm
• Smart insert in inch (WxHxD): 6.30 x 11.81 x 2.17
inch
• Bezel thickness: 2.6 cm / 1.04 inch
• Product weight: 67 kg
• Product weight (lb): 147.4
• VESA Mount: 400x200mm (Set), 100x100mm
(Smart insert)
Technical specifications
• Operating temperature range: 5 - 35 °C
• Relative humidity range: 20 - 80%
Accessories
• Included accessories: User manual on CD-ROM, AC
Power Cord, Quick start guide, DVI-D cable
• Optional accessories: Ceiling mount, Fixed wall
mount, Flexible wall mount
• Stand: Optional Stand
Miscellaneous
• Bezel: metallic anthracite
• Warranty: Europe/North America: 3 years
• Regulatory approvals: RoHS
•
Issue date 2011-10-18
Version: 6.1.2
12 NC: 8670 000 77826
EAN: 87 12581 60648 0
© 2011 Koninklijke Philips Electronics N.V.
All Rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
www.philips.com