Philips Loop 24 10BDL3051T LoopMeeting Setup guide

How to set up
Philips 10BDL3051T
LoopMeeting

Step-1 –Configure Network
Enter Android setup by pressing “Enter” and “Volume –“ fast right after each other.
(The top button on the left side is “Enter” and the lowest button is “Volume –“
Default password to enter Android setup is 1-2-3-4
By default the Philips is set up to use network by cable.
If you will use network by cable and DHCP the you do not need to change network settings.
If you want to use wireless network connection, then configure it by pressing the “Network” Icon and
press the “Wi-Fi” Icon to configure Wireless network settings.
Step-2 –Configure language and timezone
Configure setting by pressing the “Settings” icon
Set Language and timezone to the settings that fits your environment.
Make sure the time/date settings are correct –otherwise Exchange will refuse connection.
Step-3 –Install LoopMeeting App
Make sure to have the LoopMeeting app on a USB stick mounted in one of the USB ports.
Press the “App’s” icon to enter applications.
Select “Filemanager”
Select the folder MNT, USB_Storage, USB_Disk1
Install the LoopMeeting app by selecting the APK file.
Go back to main App menu
Step-4 –Autostart LoopMeeting App in kiosk mode.
Select “Settings”, then select “Signage Display” (Skiltvisning if you have chosen Norwegian language)
Select input, then Custom App
Go back to “Signage Display” menu and select “Custom App”
Press “Select App” and choose LoopMeeting.
Now everything is set.