Philips M100D/37 User manual

Register your product and get support at
www.philips.com/welcome
M100D
Wireless Home Monitor
User manual

1 Your wireless home monitor
Please read and understand the accompanied safety sheet before you
use this monitor.
To fully benet from the support that Philips offers, register your
product at www.philips.com/welcome.
What’s in box
Product overview
a
b
c
d
f
e
aMonitor lens
2x
2x
2x 2x 6x
6x
2x

bMicrophone
cLED light
dMagnetic base
eDC power connector
fReset key

2 Placement
You can place the Monitor on a at surface with the magnetic base. Or
you can attach it to the ceiling or wall, see the pictures below:
Note
•Before you place the monitor, make sure the monitor is close to a power outlet.
•Before you secure the supplied dowels and screws, drill holes on a at and hard surface.
Mount on wall

Mount on ceiling
If you install on a ceiling, select ‘Image Flip’ in the ‘Settings ( )’ options
of your monitor.

3 Set-up
You can see and hear what is happening in your room from anywhere
in the world with a smartphone.
What you need
1 Make sure your Wi-Fi router is turned on and that your
Smartphone or Tablet is wirelessly connected to your Wi-Fi
router network.
2 Have your Wi-Fi network name (SSID) and Wi-Fi network
password available as you need to ll these in. You can look up
your Wi-Fi network name in the settings of your phone or tablet.
3 Download ‘Philips In.Sight’ App from Apple App Store, or
Android Market (Google Play).
4 Connect the monitor to power. When power is connected, wait
till the Monitor light ashes Amber.
Connect Monitor to Wi-Fi network
1 Make sure that your smartphone or tablet is connected to your
Wi-Fi network.
2 Start the App.
3 Log in with your Philips In.Sight account – or create a new
account if you don’t have an account.
1
2
3

4 Follow the on-screen App instructions.
5 When prompted, input your Wi-Fi network name and your
Wi-Fi password.
• If you want to set-up another monitor, repeat the steps
of ‘3 – Set-up’.
Use the monitor
After set-up, you are ready to use the monitor. Launch the Philips
In.Sight App on your smartphone or tablet.
You can use the monitor when it is connected to your own Wi-Fi
network or any other Wi-Fi network. If there is no Wi-Fi network
available, it will work over 3G. Please note that 3G data charges can
occur.
After log-in, you see thumbnail overview of the monitor(s). Tap the
thumbnail for full screen viewing.

Application Overview
: Monitor Connection status. Green light dot means the
monitor is connected to Wi-Fi, and able to stream video. Red light
dot means the monitor is not connected or has a problem with
connection and no video streaming is possible. In this case, make
sure that the monitor is connected to Wi-Fi, and repeat the ‘3 –
Set-Up’ if necessary, or consult the ‘Troubleshooting’ section.
: Motion alert: this highlights when the monitor detects motion –
enable this in ‘Settings’.
: Audio alert: this highlights when the monitor detects audio –
enable this in ‘Settings’.
: Share Monitor: share your monitor to friends so they can view
your monitor – enable this in ‘Settings’.
: Monitor list: list all your monitors.
: Alert list: list the alerts from your monitors.
: Settings: settings and options for monitors.
My Monitors tab: Lists your monitors.
Friend’s tab: View monitor’s video shared by your friends.
Add tab: Add additional monitors.
Take a photo
Tap to take a picture. The picture is stored on your smar tphone.
Record video
Ta p to record a video.The video is directly uploaded to your
private YouTube account. Fill in your YouTube account details in ‘Settings’
– ‘General’.

Motion alert
If the monitor detects a movement within a specied range, a
30-second video is recorded to your YouTube account, and you will
receive an alert from your smartphone or tablet.You have an overview
of all alerts in the list. To enable YouTube upload, ll in your YouTube
account details in ‘Settings’ – ‘General’.
Set-up Motion Alert:
1) Tap , and tap a monitor name, and tap Motion alert.
2) Drag and resize on the screen view to select the area to be
monitored. Use the slider to set a sensitivity level.
Log-in to your YouTube account to look at the recorded alert video.
Audio alert
If the monitor detects noise within a specied range, a 30-second video
is recorded to your YouTube account, and you will receive an alert from
your smartphone or tablet.You have an overview of all alerts in the
list. To enable YouTube upload, ll in your YouTube account details in
‘Settings’ – ‘General’.
Set-up Audio Alert:
1) Tap , and tap a monitor name, and tap Audio alert.
2) Use the slider to set a sensitivity level.
Log-in to your YouTube account to look at the recorded alert video.
Share your monitor
Share the monitor’s video to your family, friends or colleagues.
1) Tap from the monitor overview page (you can also enable this in
the settings part).
2) Make sure on your friend’s smartphone or tablet, the Philips In.Sight
App is installed and that an Philips In.Sight Account is created.
3) Fill in the email address of your friend you want to share the
monitor with. The email address of your friend must be the same
email address used to create the Philips In.Sight Account.

Watch the monitor on your web browser
After you have registered your account and set up the monitor via
your smartphone or tablet, you can also watch it via your favourite web
browser (Safari, Chrome, Internet Explorer, Firefox). Enter the following
address in your web browser: www.philips.com/insightwebview
Access more options
Tap to enable or disable more options like audio and movement
alerts, turn on or off the monitor light, YouTube settings, change monitor
name, ‘Image Flip’ or other settings.