Philips BRP330 User manual

Installation Instruction
BRP330-335 Street Lighting Luminaire
Dimensions
4415 109 28660
*Application: Outdoor use only
Type LEDs Power
(W)
Voltage
(V)
Frequenc
y (Hz) CCT IP Weight (Kg)
Wind
force area
(m²)
BRP330 LED24 4 20 0.6 0.017
BRP330 LED30 5 25 0.6 0.017
BRP331 LED36 6 30 0.85 0.023
BRP331 LED42 7 35 0.85 0.023
BRP331 LED48 8 40 0.85 0.023
BRP331 LED54 9 45 0.85 0.023
BRP333 LED110 20 90 2.5 0.077
BRP334 LED144 26 120 3 0.09
BRP335 LED180 32 150 3.2 0.093
66
240~ 50 4000K
3000K
5700K
87
128
207
63
195
274
8476
383
200
89
281
435
206
329
89
452
346
89 206
BRP330 BRP331
BRP333
BRP334
BRP335

14
3
2
Installation
BRP330-335
Mounting Position: Horizontal
Cable Diameter: 8-12mm
Pole Size:
30-40mm diameter up to 45W
48-60mm diameter above 45W
Min.100
Pole Diameter
2-M8 (8N.m)
2-M10 (17N.m) 
. 
Take the product out of the packing box. Luminaire is ready for use.
Fix the street light over the pole and tighten the bolts.
Connect the power cord.
12~15
8
6 ~ 8
LN
Power input cable
Female connector
Product side
Male connector
CAUTION:
Do not open front cover when connection power.
Broken Glass/front diffusers should be immediately replaced.
60245 IEC57 3X1.0(~1.5)mm2
Application height:
Pole Diameter 30-40mm: 4-6m
Pole Diameter 48-60mm: 7-11m
1. Always use IP66 or higher IP rated junction box/connector for wiring connection.
2. The Luminaire should never be used in submerged wet conditions e.g. under water, soil, snow etc.
3. The wiring connection should also never be used in submerged wet conditions
e.g. water, soil, snow etc. OR must use IP68 junction box.
4. The warranty is void, in case any of the instructions / guidelines are not followed as per given mounting instruction.
5. This product is not supplied with any junction box / connector.
6. 6. Fo further clarification, please contact the manufacturer.