Philips SPA8210 User manual

User Manual
Register your product and get support at
www.philips.com/welcome SPA8210
Always there to help you

Warning:
• The product shall not be exposed to dripping or splashing and
noobjectslledwithliquids,suchasvases,shallbeplacedonthe
product.
• Tocompletelydisconnectthepowerinput,themainsplugofthe
productshallbedisconnectedfromthemains.
• ThemainsplugoftheproductshouldnotbeobstructedOR
should be easily accessed during intended use.
• Nonakedamesources,suchaslightedcandles,shallbeplaced
on the products.
Note:
• Make sure that the Multimedia Speakers are installed properly
beforeusing.
• YoucanseeobviouscolordistortionifyouplacetheMultimedia
Speakers close to CRT display.
System Requirements:
PC Mac
Windows®98SE,Windows®ME,Windows®
2000,Windows®XP,orWindows®Vista™,
Windows 7
MacOS9/OS®X,or
later
Installation:
1 InserttheleftspeakerplugintoTO LEFT SPEAKER socket on the
right speaker.

(R)
(L)
2 Connecttheaudioinputplugtotheaudiooutputofyourcomputer.
(R)(L)

3 Connect the AC power adaptor to:
• thepowersocketatthebackoftherightspeaker.
• the wall socket.
(R)(L)
4 TurnthevolumeknobclockwisetoswitchontheMultimedia
Speakers.
5 Adjustthevolumebythevolumeknob,orbythecomputer
application.
6 Afteruse,switchoffthespeakersandunplug.
Optional function
To listen through a headphone:
Connect it to the socket on the right speaker.
To play music from an external audio device such as an MP3 player:
1 Connect an MP3 link cable (not supplied) to the AUX socket on the
rightspeakerandtheheadphonesocketonthedevice.
2 Playmusiconthedevice.

(R)(L)
AUX
Specications
Amplier
RatedOutputPower 2 X 20 W RMS
FrequencyResponse 60Hz-16KHz,-3dB
Signal to Noise Ratio >50dB
Total Harmonic Distortion <2%
MP3 link 600 mV
PC Input 600 mV
Speakers
Speaker Impedance 8 ohm
SpeakerDriver L/R3”x2,Tweeter1”x2WOOX3”x2

General information
AC power Model: AS360-180-AI200 (Philips);
Input:100-240V~,50/60Hz,1.2A;
Output:18V 2A
OperationPower
Consumption 20W
Standby Power Consumption <0.5W
Dimensions
- Main Unit (W x H x D) 100 x 250 x 116.5 mm
Weight
- With Packing
- Main Unit
2.4 kg
2.0 kg
Hearing safety
Caution
•Toavoidhearingdamage,limitthetimeyouusetheheadphones
athighvolumeandsetthevolumetoasafelevel.Thelouderthe
volume,theshorteristhesafelisteningtime.

Be sure to observe the following guidelines when using your
headphones.
• Listenatreasonablevolumesforreasonableperiodsoftime.
• Becarefulnottoadjustthevolumecontinuouslyupwardsasyour
hearing adapts.
• Donotturnupthevolumesohighthatyoucan’thearwhat’s
around you.
• You should use caution or temporarily discontinue use in potentially
hazardous situations.
• Excessivesoundpressurefromearphonesandheadphonescan
cause hearing loss.
Yourproductisdesignedandmanufacturedwithhighqualitymaterials
andcomponents,whichcanberecycledandreused.Pleaseinform
yourselfaboutthelocalseparatecollectionsystemforelectricaland
electronicproducts,includingthosemarkedbythecrossed-outwheel
bin symbol. Please act according to your local rules and do not dispose
ofyouroldproductswithyournormalhouseholdwaste.

All registered and unregistered trademarks are
propertyoftheirrespectiveowners.
© 2012 Koninklijke Philips Electronics N.V.
Allrightsreserved.
SPA8210_05_UM_V1.0