Philips TANX20 User manual

TANX20
Party Speaker

BS & VDE DC adaptor *1
Main unit *1
Safety Sheet *1
World-wide warranty card *1
Treble & Bass.
Quick start guide *1

MIC VOLUME/MENU: Press and turn the knob to adjust level of
volume (IU), echo (EC), delay (dl), bass (lb), treble (IE) of the
microphone.
USB port.
TF Card port
VOLUME/EQ: Turn the knob to adjust the music volume (U).
Press the knob to switch between EQ modes: Bass (bA),
Treble (tr), JAZZ.
2 external 5mm wired microphone port are available.
Short press to turn on/off the unit and long press
to INPUT menu which includes:USB/TF/FM/BT/LINE IN.
channel automatic searching and store.
Next programme.
3.5 MM LINE IN input

battery
battery
CHARING THE SPEAKER: Connect the provided adaptor to the DC 9V input on the
unit and plug the other end into 100-240V power supply. Red light indicates charging ,
and green light indicates fully charged.
LED indicator of battery level:
40
battery
70
GREEN light up=app. 100% full

Press POWER button to switch on the unit.

D
D
Adaptor
Adaptor 9V,1.5A are available for TANX20.
BS
VDE

Philips NX20

Press INPUT to switch to the other source;
Long press on the unit.

Turn on the Speaker.

280*450*295 mm

DC adaptor
or recharge the
speaker unit.
DC adaptor
DC
adaptor