Philips MCB275/05B User manual

MCB275
Quick Start Guide
Prepare
Install
Enjoy
Step A
Step
Step
B
C
What’s in the Box?
You should find these items upon opening the box.
Quick Start Guide
User Manual
Quick start guide User manual
Stand
140mm (5.51")
Mounting kit
(1x template, 2 x screws)
Remote control with
1 x CR2025 battery
Pull out the plastic
protective sheet
before use.
MCB275 QSG_05-Eng 2007.4.17, 16:321

3
2
Install
Mounting stand onto the set
1
2
3
Put MCB275 on a flat and firm surface, rear side facing up.
As shown, align the stand to the slots at set’s bottom, 4FRONT facing
down.
Push the stand down into the slots.
PRESS
FRONT
FRONT
PRESS
Rear connections
Connect the speaker cables.
Connect the power adaptor of the system.
Hang up one end of the T-shape DAB/FM antenna and keep the other end at
horizontal angle to it to ensure sound DAB reception.
1
Note:
- For wall mounting, please refer to the User Manual, Appendix: How to mount
your MCB275 onto Walls. You may need assistance from the qualified service
personnel.
Speaker
(left)
DAB/FM T-type antenna
AC power
Speaker
(right)
1
2
3
MCB275 QSG_05-Eng 2007.4.17, 16:322

4
3
Enjoy
Setting the clock
1
2
Playing a disc
1
2
3
Insert a disc into the disc loader.
➜Make sure the label side is facing you.
Press ÉÅ to start playback.
To stop playback, press 9.
5
In the standby mode, press and hold CLOCK on the remote control.
➜The clock digits for the hours continue to flash.
Press 4/ ¢(or ¡ / ™on the remote control) repeatedly to set the hours.
Press CLOCK to confirm.
➜The minute digits start flashing.
Press 4/ ¢(or ¡ / ™on the remote control) repeatedly to set the minutes.
Press CLOCK to confirm the time.
Playing a USB mass storage device
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players (USB 2.0 or USB1.1), memory cards (requires an additional card reader to
work with this Hi-Fi system).
1
2
3
Insert the USB device’s USB plug into the socket on the set.
Press SOURCE once or more (or USB on the remote control) to select USB.
Play the USB’s audio files as you do with the albums/tracks on a CD.
MCB275 QSG_05-Eng 2007.4.17, 16:323

PDCC-JS_JW-0716
Enjoy
Printed in China
Programming and tuning to FM adio stations
1
2
3
Press SOURCE repeatedly (or FM on the remote control) to select the
tuner source.
Press SCAN/PROGRAM (or PROG on the remote control) for more
than two seconds to program all available stations in order of waveband.
Press ALBUM/PRESET +/- (or ¡ / ™on the remote control) until the desired
preset station is displayed.
3
2
1
Tuning to DAB stations
Press SOURCE on the system to select DAB (or press DAB on the remote control) to start
automatic search for available DAB stations.
Press SCAN to search for all band III frequencies.
At the completion of full scan, press ALBUM/PRESET +/- (or ¡ / ™on the remote control) to
select your desired DAB channels backward/forward.
Press ENTER/ÉÅ to confirm and tune to your selected channel.
Tip
–See the User Manuals for detailed instructions on DAB
operations.
4
MCB275 QSG_05-Eng 2007.4.17, 16:324