Philips MCM299/55 User manual

What’s in the Box?
You should find these items upon opening the box.
Quick start guide
MCM 299
1 x main unit stand
2 x speaker stands
FM and MW antennas
2
User Manual
1
Quick Start Guide
3
Wall Mounting
Quick Start Guide
Wall Mounting
User Manual
6 x screws and dowels
2 x speaker brackets
15-pin D-Sub cable
Remote control with two
AAA batteries
MCM299 QUG_55_Eng 2006.9.19, 15:231

1
2
Attach the supplied stands to the main unit
and speakers respectively so that they can
stand firmly on a desktop.
Connect the speaker and subwoofer cables.
3
4
Connect the MW and FM antennas.
Connect the power cable of the system.
///
Setting the clock
1
2
3
4
In active mode, press CLOCK•TIMER (CLOCK on the remote) repeatedly
until the time digits flash.
Press ALBUM-/+
56(56on the remote) repeatedly to set the hour.
Press TITLE -/+ í/ë(ALBUM/PRESET +/- on the remote) repeatedly to
set the minute.
Press CLOCK•TIMER (CLOCK on the remote) again to store the setting.
AC CORD
Tip
– See the User Manual for how to
connect other equipment to this
system.
– See Wall Mounting for detailed
instructions if you want to mount
the system on the wall.
2
3
4
Speaker
(right)
Speaker
(left)
FM antenna
MW antenna
WARNING:When you are holding
the speakers for mounting them
on the stands, please DO NOT
press on the speaker cloth directly
to avoid any speaker damage!
1
AC power
cord
MCM299 QUG_55_Eng 2006.9.19, 15:232

Enjoy
C
Playing a disc
1
2
3
4
Press LEFT OPEN • CLOSE or RIGHT OPEN • CLOSE on the front panel (L
çor R çon the remote) to open the left or right CD door respectively.
Insert one or more discs with the printed side facing you. Press LEFT OPEN •
CLOSE or RIGHT OPEN • CLOSE on the front panel (L çor R çon the
remote) again to close the CD door.
Use DISC 1/2/3/4 (or CD 1/2/3/4 on the remote control) to select a disc for
playback.
➜Playback will start automatically. If not press ÉÅ.
To stop playback, press 9.
Programming and tuning to
radio stations
1
2
3
Press SOURCE on the front panel of the system repeatedly or
TUNER on the remote to select the tuner source.
Press PROGRAM for more than two seconds to program all
available stations in order of waveband.
Press TITLE -/+ í/ ë(ALBUM/PRESET +/- on the remote)
until the desired preset station is displayed.
///
PDCC-JS/JW-0635
Tip
Detailed playback features and additional functions are described in the
accompany owner's manual.
MCM299 QUG_55_Eng 2006.9.19, 15:233