Philips 14PT1582 User manual

Instructions for use
Colour Television
14"/20"/21"
3139 125 27303
14PT1582
20PT1582
21PT1582

2
22
Positioning of the TV set
• Place TV set on a solid base (e.g. a TV/Video
cabinet)
• Leave at least 5 cm around each side of TV
set for ventilation to avoid over-heating.
• Do not place TV set near a radiator or other
sources of heat.
• Do not place TV set where it can be exposed
to rain or excessive moisture.
Mains Connection
• For correct mains voltage, refer to type sticker
at the rear of the TV set
• Consult your dealer if mains supply is different.
Note : This diagram is not representative of the
actual plug and socket.
Antenna Connections
• Connect the aerial plug to the antenna socket
¬¬
¬¬
¬on the backcover.
• Insert the mains plug into a wall socket.
Use of Remote Control
• Insert correct type of batteries into the
compartment.
• Ensure the batteries are placed in the right
direction.
Switching on the set
• Press the mains power button to switch on/off
the TV.
• If the set is on standby mode (indicator is red),
press STANDBY button on the remote control
to switch on set.
INSTALLATION
5 cm 5 cm
5 cm

3
33
CONNECTING PERIPHERAL EQUIPMENT
Equipment such as VCR, Laser disc player, VCD, etc. can be connected to the video and
audio (AV) sockets at the rear of the TV. Switch off mains power of the TV and equipment
before making any connections.
Connection for Playback
• Connect the Video Output socket of the
VCR/laser dissc player to the AV “in”
socket at the rear of the TV to playback
programmes.
Connection for recording
1. From the TV channel you are watching
• Connecct input sockets of the VCR to the
Monitor “out” sockets at the rear of the
TV to do recording.
2. From one VCR to another VCR
• Connect the sockets of the VCR which you
wish to record from to the Input sockets at
the rear of the TV.
• Connect the sockets of the receiving VCR to
the Monitor “out” sockets at the rear of the
TV.
VIDEO
AUDIO
outin
VIDEO
AUDIO
outin
VIDEO
AUDIO
outin
VCR
OR Laser
disc
player
VCR
VCR 1 VCR 2

4
44
n
VIDEO AUDIO
˙
˝˚
¸
VOLUME CHANNEL
LK ˚
¸
INSTALL /
MENU
FUNCTIONS OF TV FRONT CONTROLS/SOCKETS
14PT1582
20PT1582
1. Mains Power button Switch mains power on or off.
2. Standby light indicator Indicate red light when standby mode is activated.
3. Remote Sensor Aim remote control handset at remote sensor when
operating the TV.
4. Headphone socket Connect headphone jack to socket for personal listening.
5. AV “in” sockets Connect to Video “out” and Audio “out” sockets of VCR
laser disc player, etc.
6. Volume ˝˝
˝˝
˝ / ˙˙
˙˙
˙button Adjust sound volume louder/softer.
7. Channel ¸¸
¸¸
¸ / ˚˚
˚˚
˚button Select channel in ascending/descending order.
Note : You can enter the main menu by pressing both
the Volume ˝˝
˝˝
˝/ ˙˙
˙˙
˙buttons at the same time.
Press Channel ¸¸
¸¸
¸/ ˚˚
˚˚
˚button to select items on the menu.
Press Volume ˝˝
˝˝
˝/ ˙˙
˙˙
˙button to activate sub-menu.
1
345
2
6 7
nVIDEO AUDIO
VOLUME
LK
˙
˝ ˚
¸
CHANNEL ˚
¸
INSTALL /
MENU
3
nVIDEO AUDIO
VOLUME
LK
˙
˝ ˚
¸
CHANNEL ˚
¸
INSTALL /
MENU
3
21PT1582
1
345
2
6 7

5
55
2
ehf
4
b
123
456
789
0
CH
MENU INC.
SURR.
SLEEPOSDAV
SMART SMART
±`
A/CH
SURF
AH
FUNCTIONS OF REMOTE CONTROL
2
3
5
6
7
8
9
1. STANDBY
Switch off set temporarily to standby
mode. (The red light indicator lights
up when set is on standby mode). To
switch on set, press STANDBY or any
DIGIT button.
2. AV
Selects AV channels.
3. OSD (On-Screen Display)
– Displays channel number and
sound transmission mode.
– Allows you to exit menu from screen.
4. DIGIT (0 - 9)
Allows you select a channel. For a
2-digit channel number, the second
digit must be entered before the
“ – “ sign disappears.
5. SMART SOUND
Allows you to access 4 different
types of sound settings and select
your preferred setting.
6. MENU
To display or exit menu from screen.
7. CURSOR UP
Allows you to select the next
item on the menu.
8. CURSOR LEFT
Allows you to access the sub-menus
and adjust the settings.
9. VOLUME + / –
Increases / decreases volume.
10. MUTE
Mutes sound. To restore sound,
press button again.
11. TELETEXT
Not applicable.
11
10
4
1

6
66
2
ehf
4
b
123
456
789
0
CH
MENU INC.
SURR.
SLEEPOSDAV
SMART SMART
±`
A/CH
SURF
AH
FUNCTIONS OF REMOTE CONTROL
12. SLEEPTIMER
Allows you to select a time period after
which the set will switch to standby
mode automatically. You can set the
timer from OFF mode up to a maximum
of 240 minutes.
13. SMART PICTURE
Allows you to access 4 different types
of picture settings and select your
preferred setting.
14. INCREDIBLE SURROUND
Not applicable.
15. CURSOR RIGHT
Allows you to access the sub-menus
and adjust the settings.
16. CURSOR DOWN
Allows you to select the next item
on the menu.
17. CHANNEL + / –
Allows you to select channel in
ascending or descending order.
18. 44
44
4
Not applicable for 44
44
4 feature.
19. SURF / ALTERNATE CHANNEL
– When surf mode is activated through
the main menu, it allows you to select
up to a maximum of 8 channels and
view quickly the selected channels .
– It also allows you to alternate between
the last viewed channel and the present
channel if alternate channel mode is
activated.
12
13
15
16
17
18
19
14

7
77
AUTOMATIC TUNING OF THE TV CHANNELS
OR
LANGUAGE ENGLISH
AUTO STORE ÉÉ
ÉÉ
É
SWAP ÉÉ
ÉÉ
É
BLUE MUTE OFF
INSTALLATION ÉÉ
ÉÉ
É
BRIGHTNESS IIIII
❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙
28
COLOUR IIII
❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙
18
CONTRAST IIIIIIII
❙ ❙ ❙ ❙ ❙ ❙
38
LANGUAGE ENGLISH
AUTO STORE ÉÉ
ÉÉ
É
SWAP ÉÉ
ÉÉ
É
SKIP ÉÉ
ÉÉ
É
AUTOSTORE 050 MHZ
CHANNEL 1
LANGUAGE ENGLISH
AUTO STORE ÉÉ
ÉÉ
É
SWAP ÉÉ
ÉÉ
É
SKIP ÉÉ
ÉÉ
É
MENU
OSD
SURF A/CH
BLUE MUTE OFF
INSTALLATION ÉÉ
ÉÉ
É
BRIGHTNESS IIIII
❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙
28
COLOUR IIII
❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙
18
Selecting the language and Automatic Tuning
Press button Result on TV Screen
1. Enter main menu.
2. Select INSTALLATION.
3. Enter installation
menu. LANGUAGE
option is highlighted.
4. Select your desired
language.
5. Select AUTO STORE.
6. Start automatic tuning.
7. After tuning is completed,
the installation menu
will appear.
8. Exit menu from screen.
2
ehf
4
b
123
456
789
0
CH
MENU INC.
SURR.
SLEEPOSDAV
SMART SMART
±`
A/CH
SURF
AH

8
88
SWAP ÉÉ
ÉÉ
É
SKIP ÉÉ
ÉÉ
É
MANUAL ÉÉ
ÉÉ
É
SYSTEM AUTO
SEARCH 044 MHZÉÉ
ÉÉ
É
FINE TUNE
❙ ❙ ❙ ❙ ❙ ❙
I
❙ ❙ ❙ ❙ ❙ ❙
SELECTION OF TV SYSTEM
➠➠➠ LANGUAGE ENGLISH
AUTO STORE ÉÉ
ÉÉ
É
SWAP ÉÉ
ÉÉ
É
MENU INC.
SURR. MENU INC.
SURR. MENU INC. SURR.
SYSTEM AUTO
SEARCH 044 MHZÉÉ
ÉÉ
É
FINE TUNE
❙ ❙ ❙ ❙ ❙ ❙
I
❙ ❙ ❙ ❙ ❙ ❙
(Applicable to certain models only)
This feature allows you to select your desired TV system. If AUTO is selected, the respective
colour system will be automatically selected according to the transmission system.
Note : Select another system if reception is poor at AUTO mode.
1. Enter main menu. 2. Select INSTALLATION. 3. Enter installation mode.
Press button Result on TV Screen
4. Press button repeatedly
until MANUAL is selected.
5. Enter system menu.
6. Press button repeatedly
to cycle through the
respective transmission
system and select the
desired system.
7. Select STORE.
8. Store system.
9. Exit menu from screen.
OSD
2
eh f
4
b
123
456
789
0
CH
MENU INC.
SURR.
SLEEPOSDAV
SMART SMART
±`
A/CH
SURF
AH
FINE TUNE
❙ ❙ ❙ ❙ ❙ ❙
I
❙ ❙ ❙ ❙ ❙ ❙
CHANNEL 8
STORED

9
9
MENU INC.
SURR.
MENU INC.
SURR. MENU INC. SURR.
➠➠➠LANGUAGE ENGLISH
AUTO STORE ÉÉ
ÉÉ
É
SWAP ÉÉ
ÉÉ
É
SWAP ÉÉ
ÉÉ
É
SKIP ÉÉ
ÉÉ
É
MANUAL ÉÉ
ÉÉ
É
SYSTEM AUTO
SEARCH 044 MHZ ÉÉ
ÉÉ
É
FINE TUNE
❙ ❙ ❙ ❙ ❙ ❙
I
❙ ❙ ❙ ❙ ❙ ❙
SYSTEM AUTO
SEARCH 055 MHZ ÉÉ
ÉÉ
É
FINE TUNE
❙ ❙ ❙ ❙ ❙ ❙
I
❙ ❙ ❙ ❙ ❙ ❙
CHANNEL 2
SEARCH 055 MHZ ÉÉ
ÉÉ
É
FINE TUNE
❙ ❙ ❙ ❙ ❙ ❙
I
❙ ❙ ❙ ❙ ❙ ❙
CHANNEL 8
STORE ÉÉ
ÉÉ
É
FINE TUNE
❙ ❙ ❙ ❙ ❙ ❙
I
❙ ❙ ❙ ❙ ❙ ❙
CHANNEL 8
STORED
123
456
789
0
OSD
MANUAL TUNING OF TV CHANNELS
Manual tuning of channels allows you to select your preferred channel number for
every available programme.
1. Enter main menu. 2. Select INSTALLATION. 3. Enter installation mode.
Press button Result on TV Screen
4. Press button repeatedly
until MANUAL is selected.
5. Enter manual tuning menu.
6. Select SEARCH.
7. Start searching for a
transmitting channel.
Searching stops once a
transmitting channel is found.
8. Press button repeatedly until
CHANNEL is selected.
9. Key in the desired channel
number.
10. Select STORE.
11. Store tuned channel. To
continue searching for the
next transmitting channel,
repeat steps 7 to 12 again.
12. Exit menu from screen.
2
ehf
4
b
1 2 3
456
789
0
CH
MENU
INC.
SURR.
SLEEPOSDAV
SMART SMART
±
`
A/CH
SURF
A
H

10
1010
MENU INC.
SURR. MENU INC. SURR. MENU INC. SURR.
➠➠➠LANGUAGE ENGLISH
AUTO STORE ÉÉ
ÉÉ
É
SWAP ÉÉ
ÉÉ
É
123
456
789
0
123
456
789
0
LANGUAGE ENGLISH
AUTO STORE ÉÉ
ÉÉ
É
SWAP ÉÉ
ÉÉ
É
SKIP ÉÉ
ÉÉ
É
MANUAL ÉÉ
ÉÉ
É
FROM 3
TO 2
EXCHANGE ÉÉ
ÉÉ
É
FROM 3
TO 8
EXCHANGE ÉÉ
ÉÉ
É
FROM 3
TO 8
EXCHANGED
OSD
SWAPPING OF CHANNELS
This feature allows you to change the channel number to your choice for a particular TV
station.
1. Enter main menu. 2. Select INSTALLATION. 3. Enter installation mode.
Press button Result on TV Screen
4. Select SWAP.
5. Enter swap menu.
6. Key in the desired
channel number
you want to exchange
from in the FROM
column.
7. Select TO.
8. Key in the programme
number you want to
exchange to in the TO
column.
9. Select EXCHANGE.
10. Activate exchange of
channels.
11. Exit menu from screen.
2
ehf
4
b
123
456
789
0
CH
MENU INC.
SURR.
SLEEPOSDAV
SMART SMART
±`
A/CH
SURF
AH