Philips 24PW6322/05 User manual

1
Table of contents
Introduction
Installation
TV set and remote control......................................................................................2
Switching on.................................................................................................................2
The keys on the remote control.............................................................................3
The keys on theTV set .............................................................................................3
Menu installation:selecting menu language and country...................................4
Tuning-inTV channels:automatic store.................................................................5
Sort................................................................................................................................5
Manual store................................................................................................................6
Favourite programmes and naming programmes................................................7
Operation
Operating the remote control ................................................................................8
Other functions...........................................................................................................9
16/9 Function............................................................................................................10
Using the menu:adjusting the picture and sound.............................................12
Child lock,storing adjustments.............................................................................13
Programming,message............................................................................................14
Teletext.......................................................................................................................15
Peripherals
Connecting peripheral equipment........................................................................17
Tips..............................................................................................................................19
Glossary.....................................................................................................................20
Index ...........................................................................................................................20
Thank you for purchasing this television set.Every effort has been made
to simplify the operation and tuning of the receiver by the use of menus.
These menus are displayed on screen when requested giving easy access to
the various adjustments.
This handbook has been designed to help you install and operate yourTV set.
We would strongly advice you read it thoroughly.

2
Installation
ÂConnecting the aerial
Insert the aerial plug into the socket Mat the rear
of the set.
êConnecting the mains
Insert the mains plug into a wall socket
(220-240V/50 Hz).
®Remote control
Insert the 2 LR03-type batteries (supplied) making sure
they are the right way around.
In an effort to help protect the environment the batteries
supplied with this television do not contain mercury or nickel
cadmium. If a means of recycling batteries is available,please
use this (if in doubt, contact your dealer).
†Switching on
Press the on/off key to switch on the television.
A green indicator comes on and the screen lights up.
If the indicator is red,press the key on
the remote control.
When the remote control is being used the indicator flashes
orange.
æInstalling theTV set
Place yourTV set on a solid,stable surface (please
ensure this is strong enough).Do not place anything
on theTV set which might damage it (plants or heat
sources).For ventilation allow a space of at least 5cm
around theTV set.

3
Remote control keys
The keys on theTV set
EXT sockets selection (p.9)
Screen information (p.9)
INSTALLATIONMenu (p . 4)
Press the and keys
Personal Preferences (p. 9)
sound mode (p.9)
16/9 formats (p.10)
Video recorder k ey (p . 9)
Menu (p . 12)
(red) picture menu
(green) sound menu
(yellow) features menu
(blue) exit from menu
use of menus
Switch teletext on/off (p . 15)
Games/Digital Presets (p.8)
"Smart controls" k eys (p . 8)
picture pre-setting
sound pre-setting
Teletext functions (p . 14)
enlarging a page
temporary interruption
hold selected sub-page
reveal
overlay text on picture
time display or direct access
to a sub-page.
(p. 8)
programme selection
volume
/ numerical keys
mute key
previous programme
Standby (p . 8)
Programmable k eys (p . 8)
The television has 3 keys:MENU,-and +.These keys are located on the top,front or
side of the set,(if on the front or side of the set they may be concealed by a flap).
The MENU key is used to select the function to be altered.The -and +keys are used
select programmes or modify the selected MENU item.

4
Installation Menu
Selecting the menu language and the country
From the INSTALLATION menu:
æSelect the LANGUAGE adjustment using the keys.
ÂSelect the language you wish to use by means of the or keys.
The text for all the menus will appear in the language you have chosen.
êSelect the COUNTRY adjustment using the keys
®Select your country using the or keys (GB for Great Britain).
Warning: It is essential for correct channel tuning that these two adjustments are set
correctly.
æ
Open the
cover
Â
Press the and keys at
the same time.
The INSTALLATION menu
appears on the screen.
To call up the INSTALLATION menu:
To use the menus:
These 4 keys allow you to move around in the menus,make adjustments
and access the sub-menus.
To exit from the menus
Press the blue key.
If the menu display is not stable,press the key.
This Menu enables you to tune in the channels on theTV set.

5
Tuning-in theTV channels
There are two ways the television can be tuned in :automatic store or
manual store (tuning - in channel by channel).
Automatic store
From the INSTALLATION menu ( and keys)
(after ensuring LANGUAGE and COUNTRY have been set correctly)
æSelect AUTO STORE ( keys) and press .
The AUTO STORE menu appears.Searching begins.
TheTV set searches through the complete frequency range in your local
region and stores all the programmes it finds.The search operation takes
a few minutes.When the search is complete,the INSTALLATION menu
reappears automatically.
ThisTV set is equipped with an EasyTune system which automatically
sorts the programmes by name.
ÂIf the transmitter emits the correct signal,the programmes are correctly
numbered. Go to page 7.
In certain cases, the system may ask you to indicate your local region using keys
to .
êIf no signal is emitted,the programmes will be numbered in descending
order starting from 99,98,97,..Should this occur,the SORT menu should
be used to re-number the programmes.
If no picture is found,refer to the chapter entitled "Tips" (page 19).
Sort
This menu allows you to re-number the programmes in the order you prefer.
æSelect SORT ( keys) and press .
The SORT menu appears.The menu provides a list of all the programme
numbers with their names (where provided),or frequencies or channels.
ÂUsing the keys,select the programme to be re-numbered.
If,for example,you want to re-number programme 96 as 2:Select 96
using keys (or type ).
The number chosen (96) will appear in blue in the list.
êPress the key to enter.A yellow rectangle appears on the name of the
programme (or on its frequency or channel).
®Enter the new number using keys to .
In our example,type .Programme 02 appears.The number (02)
appears in blue in the list.
†Press the key to enter ( can be used to cancel).
The exchange of numbers is now complete.In our example,programme
No.96 has become No.02 (and programme No.02 has become No.96).
Repeat this operation for other programmes you wish to re-number
To exit from the menu
Press the blue key.

6
Manual store
This menu allows you to store each programmes manually.
From the INSTALLATION menu ( and keys).
æSelect MANUAL STORE ( keys) and press .
The MANUAL STORE menu appears.
ÂSelect CHANNEL/FREQUENCY ( ).For certain countries this
adjustment is not available.
Use the keys to select tuning mode.
FREQ. (frequency search) or CHAN.C and CHAN.S (channel search if you
know the channel numbers on which the programmes are broadcast).
êSelect SYSTEM ( ).
Use to select EUROPE,EUR. W,EUR. E,UK or FRANCE
(according to model).
Selecting EUROPE guarantees automatic detection,with the exception
of transmissions from France (standard LL':select FRANCE) or in
certain cases of poor reception where EUR. W (BG),EUR. E (DK) or
UK (I) should be selected.
For more information see glossary on p.20
®Select SEARCH ( ) and press .
The search begins.As soon as a programme is found,the search will stop.
Go to section Ú.
If you know the frequency (or the channel) of the programme you
wish to receive,you can enter its number in directly using keys
numbered to .
If no picture is found,refer to "Tips" chapter (page 19).
If you want to rerun the search,press again.
†Select FINE TUNE ( ).If reception is not satisfactory,you can use
the fine tuning function.
Hold down the keys to adjust.
ÚSelect PRG NUMBER ( )
Use the keys or the to keys to enter the required number.
ºSelect STORE ( ) and press .
The OK message appears.The programme and its name (if it has one)
are stored.
repeat ®,Ú,ºfor each programme to be stored.
To exit from the menu:
Press the blue key.

7
Favourite Programmes
This menu allows you to choose which programmes can be accessed
using the key on the remote control.
From the INSTALLATION menu:
æSelect FAVOURITE PRG ( keys) and press
The FAVOURITE PRG menu appears. All programmes found during
the search are automatically included in the menu and appear in green.
ÂUse the keys to select any programme you wish to remove
from the list of favourites.
êPress to de-activate (or activate) a programme.
The de-activated programmes appear in white,the activated
programmes appear in green.
Only the programmes and EXT sockets that are displayed in green in
this menu can be accessed using the key.
Warning: If all programmes are de-activated, the key will cease to
function.
To exit from the menu:
Press the blue key.
Programme names
This menu allows you to name and modify names for programmes and
EXT sockets.
From the INSTALLATION menu:
æSelect GIVE NAMES ( keys) and press .
The GIVE NAMES menu appears with the list of programmes found
automatically during installation.
Certain programmes may not be named (the signal needed for
identification is not always transmitted) or may be inappropriately
named (only 5 characters are displayed).
ÂUse the key to select the required programme.
êUse the keys to move to the area in which the programme name
appears (up to 5 characters).
A yellow rectangle appears in the chosen area.
®Use the keys to select or modify the character.
†Use the keys to move around in the next programme.
To exit from the INSTALLATION menu:
Press the blue key twice.

These allow direct access to any adjustment made in
the PICTURE and SOUND menus (see p.12)
To program the keys:If,for example,you wished to
gain direct access to the BRIGHTNESS adjustment.
Display the PICTURE menu (red key) and select
BRIGHTNESS ( ).Use keys and to
adjust,rather than the keys.The keys are now
programmed.Exit from the menu (blue key).
Press and again.This will give you direct
access to the brightness adjustment.Repeat for any
other adjustment you may wish to make.
Programmable
keys
"Smart controls "
keys To access the presets of theTV set.
Smart Picture Controls:Press the key to obtain
the following settings:RICH,SOFT,NATURAL and
return to MANUAL.
Smart Sound Controls:Press the key to obtain
the following settings:SPEECH,MUSIC,THEATRE
and return to MANUAL.
The values corresponding to these presets are given in the
PICTURE and SOUND menus (see p.12).
8
TheTV set is switched off and the red indicator
lights up.To switch theTV set on again, press
or keys to .
For further information,see "Tips" (p.19).
Using the remote control
Press: Result:
Standby
SelectingTV
programmes Move up or down a programme.
To sequentially display all of the programmes hold
the key down for 3 seconds.Press again to cancel.
N.B.:Only programmes activated in the FAVOURITE
PRGS menu can be accessed (see p.7).
Choose a programme.
For a 2 figure number,the second figure must be
entered before the dash disappears.
Numerical keys
Return to the last programme watched.
Gives access to the presets for games consoles and
digital equipment:E1 DIGITAL,E1 GAMES BACK and
E2 GAMES FRONT (refer to p.17).
Previous
programme
Digital and
Games Presets
Volume The volume is adjusted.
Mute key Disables or enables the sound.
/
(white
key)

9
Other functions
Press: Result:
Press the key and one of the following keys
simultaneously.
vrecord,
srewind,
rfast forward,
ustop,
qplay,
Gprogramming (on certain models),
31- or 2- digit programmes,
programme selection,
to enter a programme number,
standby
These keys function with video recorders in our range and with
all models which use the RC5 signalling standard.
Video recorder
keys
Screen
information To continuous display of the programme number
and the information line on or off each time the
programme is changed,press this button for 3
seconds.Pressing briefly displays the number,name,
16:9 mode,sound mode and information line for a
few seconds.
The information line displays the title of the programme at
the bottom of the screen (except in mode ZOOM 14:9
and ZOOM 16:9).This line is only displayed for those
programmes which transmit the signal by teletext.
Sound mode Pressing this key allows you to switch from STEREO
to MONO sound (in case of stereo transmission),
or to choose between language for language g
(in case of bilingual transmissions).
ForTV sets fitted with NICAM reception,the
DIGITAL message appears when a NICAM broadcast
is received.The key allows you to switch from
DIGITAL STEREO to MONO or to choose between
DIGITAL f,DIGITAL gor MONO.
Pressing this key selects E1 (EXT1),E2 (EXT2) and
E2 Y/C in turn (see p.17).
Select EXT
sockets
Restores the settings made in the FEATURES menu
(see p.13).Keep the button pressed during 3
seconds if you want to reset the adjustments per
programme.
Personal
Preferences
The time is displayed in the top right-hand corner
of the screen.
This function only exists if the programme broadcasts teletext.
Time display

10
16/9 Function
The pictures you receive may be transmitted in 16:9 format (wide
screen) or
4:3 format (conventional screen). 4:3 pictures sometimes have
a black band at the top and bottom of the screen (letterbox format).
This function allows you to optimise the picture display on screen.
Automatic switching
ThisTV set is also equipped with automatic switching which will select
the correct-screen format,provided the specific signals are transmitted
with the programmes.
This automatic format can olso be modified manually.
4 : 3
4/3 Picture
4/3 Picture Result
ZOOM 14 : 9
4 : 3
ZOOM 14:9 Mode
The picture is enlarged to 14:9 format,a thin black band remains on
both sides of the picture.The keys allow you to increase or
decrease the section at the bottom of the picture where sub-titles
may be displayed.
Using the different screen formats
Press the keys to select the different modes:
4:3,ZOOM 14:9,ZOOM 16:9,SUBTITLE ZOOM,SUPER ZOOM and
WIDE SCREEN.
These settings may also be accessed using the key under the flap on your
remote-control.
4:3 Mode
The picture is reproduced in 4:3 format and a black band is displayed
on either side of the picture.The picture may be progressively
enlarged using the keys.

11
4 : 3
4 : 3
Result4/3 Picture Letterbox
Result
Result
4/3 Picture
16/9 Picture
4 : 3 ZOOM 16 : 9
SUPER ZOOM
4 : 3
Result
4/3 Picture
SUBTITLE ZOOM
WIDE SCREEN
Subtitle Subtitle
ZOOM 16:9 Mode
The picture is enlarged to 16:9 format.This mode is recommended
when displaying pictures which have black bands at the top and
bottom (letterbox format).Use the keys if you wish to display
sub-titles.
SUBTITLE ZOOM Mode
This mode is used to display 4:3 pictures using the full surface of the
screen leaving the sub-titles visible.Use the keys to increase
or decrease the section at the bottom of the picture.
SUPER ZOOM Mode
This mode is used to display 4:3 pictures using the full surface of the
screen by enlarging the sides of the picture.
WIDE SCREEN Mode
This mode restores the correct proportions of pictures transmitted
in 16:9 using full screen display.
Note:If you display a 4:3 picture in thid mode,it will be enlarged horizontally.

1212
Picture
æDisplay PICTURE menu (red key).
ÂUse the keys to select your adjustments and the keys
You can now access the adjustments BRIGHTNESS,COLOUR,
CONTRAST and:
SHARPNESS adjusts the clarity of the picture,TINT adjusts the
colour temperature of the picture from“cool” (blue white) to
“warm” (red white).
NOISE REDUCT. Useful in case of poor reception to reduce picture
noise (snowy picture).
For picture adjustment see also "Tips" (p.19).
Using the menus
æPress the coloured key (red,green or yellow) to display the menu
of your choice.
ÂUse the keys to select your adjustments and the keys to
adjust or access the sub-menus.
êPress the blue key to exit from the menu displayed.
Sound
æDisplay SOUND menu (green key).
 You can now access the BALANCE , TREBLE , BASS , and
INCR. SURROUND: This function enhances the stereo effect,giving the
impression that the speakers are positioned further apart.For mono
transmissions a stereo effect is simulated.
HEADPHONES: Allows you to adjust the headphones volume
independently from the loud-speakers on theTV set.
To exit from the menus:
Press the blue key.
PICTURE
SOUND
EXIT
FEATURES

1313
Features
Child Lock
The child lock function is an electronic lock which disables the keys
on theTV set.
æDisplay the FEATURES menu (yellow key).
ÂSelect CHILD LOCK ( keys).
êUse keys to switch to ON.
® Switch off theTV set and remove the remote control.The television can
no longer be used.
TheTV set can only be switched on using the remote control.
To cancel: Return CHILD LOCK to OFF in the features menu.
Programming
Sleeptimer
From the FEATURES menu (yellow key).
æSelect PROGRAMMING ( ) and press .
The PROGRAMMING menu appears.
ÂSelect SLEEPTIMER and use to enter the length of time after
which theTV will switch to standby mode (up to 180 mins).
Press the key to display the length of time remaining.
To cancel: Switch SLEEPTIMER back to 0.
Storing adjustments
This function allows you to store your own picture and sound
adjustments.The adjustments are restored every time your set is
switched on, or by pressing the green key on your remote control.
General storing
æFirst carry out your PICTURE and SOUND adjustments and adjust
the volume ( key) and then:
ÂDisplay the FEATURES menu (yellow key).
êSelect STORE PP ALL ( keys) and press .
The message OK appears.All the PICTURE and SOUND menu
adjustments as well as the volume are stored.
Storing adjustments for each programme
This function allows you to correct any differences in levels which may
exist betweenTV channels and/or EXT sockets.It allows you to store
BRIGHTNESS,COLOUR,SHARPNESS,NOISE REDUCT.and volume
adjustments ( key).
æCarry out desired corrections to settings for the programme
(or EXT connection),and then:
ÂDisplay the FEATURES menu (yellow key).
êSelect STORE PP P:_ _ ( keys) and press .
The message OK appears.The adjustments are stored.
Repeat for each programme that needs correcting.

1414
Programmed Switch on
The following adjustments allow you to program theTV to
automatically switch on with the programme of your choice.
Select the adjustments using keys:
æSET CLOCK: Use keys to or the keys.
N.B.:Every time theTV is switched on the clock is automatically updated on
the basis of the teletext information in programme No.1.
If theTV set does not feature teletext,this update will not occur.
ÂSTART TIME: Use keys to or keys.
êSTOP TIME: Use keys to or keys.
®PRG NUMBER: Use keys to or keys.
†DAILY: Set this function to ON ( key) if you want the programming to
apply every day.
ÚTIMER ACTIVE Set this function to ON to activate the timer.
ºPress the blue key to exit from menu.
If you now switch theTV set onto standby ( key),it will automatically
switch on at the time programmed.
To cancel: Switch TIMER ACTIVE back to OFF.
N.B.:For programming to function correctly do not use the on/off key on the
front of theTV set to switch off theTV.
The programmed switch on-off can be used together with the child lock function
in order to limit the use of theTV set to a certain length of time.
Message
This menu allows you to leave a message which will appear on the screen
when theTV is switched on (e.g.:"call me when you get home").
From the FEATURES menu (yellow key).
æSelect MESSAGE ( ) and press .
The MESSAGE menu appears.Select the adjustments using keys:
 CHANGE: Press the key to display CHANGE menu.Use the keys to
select the positioning of the characters (44 characters spaced over 2 lines).
Use the keys to select each character.
When the message has been entered:
Press the blue key to return to previous menu.
êRUN: Press the key to switch to ON.
®Exit from the menu by pressing the blue key.
The message will remain on the screen.
To erase the message: Press the blue key.
N.B.:The message will reappear every time theTV is switched on.
To cancel: Switch RUN back to OFF.
†CLEAR: Press key to erase message.
To exit: Press the blue key repeatedly.
Picture tilt (only on certain models)
Select PICTURE TILT using the keys and use the key to
adjust the tilt of the picture.
This compensates for regional variations in the earth's magnetic field.

1515
Teletext
Press: Result:
Switch teletext
on/off Display or exit from teletext.
The main index page presents a list of subjects
to which you have access.
Each subject has a corresponding page number
(always 3 digits).
If the selectedTV channel does not broadcast teletext,
P100 is displayed and the screen remains black (if this is
the case,switch off teletext and choose anotherTV channel).
If you have stored a favourite page,press the white key
to return to the main index.
To type in the page number required.
E.g.page 120,type .The number is displayed in
the top left-hand corner of the screen,the page
counter starts searching and then the page selected is
displayed.Repeat to consult another page.
If > xxx < flashes briefly or the counter continues searching,
this means the page selected is not broadcast or is not
available.If this is the case,choose another number.
Selecting a
teletext page
To consult the previous page (-) or the next page (+).
Previous page/
Next page
selection
Direct access to
a subject Coloured zones are displayed at the bottom of the
screen.The coloured keys allow access to the
subjects or their corresponding pages.
Main index To return to the main index (generally on page
100),press the white key .
Previous page To return to the page displayed previously.
/
Teletext is an information system,broadcast by certainTV channels,which can be
consulted in the same way as a newspaper.
It also provides subtitles for the hard of hearing or people who are unfamiliar with
the broadcast language (cableTV network,satellite channels,etc.).
P120

1616
To activate/de-activate the screen overlay.
Press: Result:
Overlaying
teletext on the
TV picture
Reveal
Stop the
sequence of sub-
pages (hold)
To reveal/conceal hidden information (solutions to
games or questions/answers).
Certain pages have sub-pages which follow on
automatically.If this is the case,this key will allow
you to stop or start the sequence.The message I
appears on the top left-hand corner of the screen.
First display your favourite page and then hold the
white key down for 3 seconds to store.
This page will be displayed automatically every time
teletext is switched on.
You can store a different page for each programme.
Favourite page
To stop or return to the teletext display.The L
symbol is displayed,and the television programme
reappears on the screen.This function allows you to
wait when the search for pages takes a long time.
Temporary
interruption of
the display
Enlarging a page To display the upper part,the lower part and then
to return to the normal page size.
The key may be used to enlarge the page.
Subtitles Consult the main index to find out the page
number for subtitles.Enter the subtitles page
number (e.g.888).
The page counter searches and then the subtitles
appear on screen.If no subtitles are available the
page counter will continue to search.
To exit from subtitles,press .
/
Teletext (special features)
To access a sub-page directly,press .The page
number followed by four dashes will appear in the
bottom left-hand corner of the screen.Type the
number of the sub-page required using 4 numbers,
e.g.type 0002 to consult sub-page 2.
The page counter searches and then the sub-page is
displayed.Press to return to current page.
Direct selection
of a sub-page

1717
Connecting peripheral equipment
The EXT1 socket has audio and video inputs/outputs and RGB inputs.
The EXT2 socket has audio and video inputs/outputs and S-VHS inputs.
For further information,see glossary (p.20).
• If your video recorder has a euroconnector socket,carry out the above
connections.Euroconnector sockets ensure better picture quality.
•
If your video recorder does not have a euroconnector socket (or if this is already
being used by another device),then the only connection possible is via the aerial
cable.Your video recorder is then considered as aTV programme by yourTV set.
You will therefore need to tune in your video recorder's test signal and assign it
programme number 0 (see manual store chapter,p.5).
To reproduce the video recorder picture,press the key.
Refer to your video recorder's operating instructions concerning the test signal
(the video recorder must be equipped with an HF modulator).
To select connected equipment
• Use key to select E1 (EXT1) , E2 (EXT2) or,for S-VHS or Hi-8 equipment, E2 Y/C .
Most equipment (decoder,video recorder) carries out the switchover itself.
• The white key may also be used to select the sockets with adapted Smart
Controls:E1 DIGITAL (for digital equipment connected to EXT1),E1 GAMES BACK
(for games connected to EXT1) and E2 GAMES FRONT (for game connected to
the VIDEO socket on the front panel).
Video recorder ...with Decoder
Other equipment (satellite receiver,decoder,CDV/CDI, games...)
Connect to socket EXT1 (or to EXT2 if it produces a S-VHS signals).

1818
Front connections
Carry out one of the following connections and then:
Use the key to select E2 (forVHS or 8mm cameras) or E2 Y/C (S-VHS or
Hi-8 cameras).
For a mono sound camcorder,connect the audio signal to the AUDIO L input.
Use the key to reproduce the sound on the left and right loudspeakers of the
television.
N.B.:If a peripheral is connected to EXT2,it is advisable to switch it off while using
a front S-VHS connection.
To make a copy of recordings:
Carry out one of the following connections,then:
Press to select E1.
On the video recorder,select the euroconnector socket as the recording source.
N.B.:Copying is not possible using front connections.
Amplifier
Use an audio connection cable and connect the Psockets "L" and "R" on
the set to the "AUDIO IN" "L" and "R" input on your hi-fi amplifier.
Headphones
To adjust the headphones volume,use the HEADPHONES adjustment in the SOUND
menu (p.12).To adjust the volume on theTV set, use the or keys.
You can also access the HEADPHONES adjustment directly using programmable keys
and on the remote control (see p.8).

19
Tips
Poor reception
The proximity of mountains or high buildings may be responsible for ghost pictures,
echoing or shadows.If this is the case,modify the orientation of the outside aerial.
Check that theTV channel is tuned in correctly or try using fine tuning:see "fine tuning" (p.6).
The equipment connected to theTV gives a picture in black and white? Check that you
have selected the correct E2 or E2 Y/C socket ( key).
No picture
Have you forgotten to connect the aerial socket? Have you chosen the correct system?
(p.6) Does your aerial enable you to receive broadcasts in this frequency range?
Poorly connected euroconnector cables or aerial sockets are often the cause of
picture or sound problems (sometimes the connectors can become half disconnected
if theTV set is moved or turned).Check all connections.
Picture adjustment
If you have trouble obtaining a clear picture,select one of the smart control presets
(p.8) and store using the STORE PP ALL function in the FEATURES menu.
The picture seems too red or too blue!Adjust the TINT (p.12).
In the event of difficult reception (snowy picture) switch the NOISE.REDUCT on
the PICTURE menu to ON.(p.12).
The picture is badly adjusted? press the green key or re-adjust (p.12).
To reset the stored settings for each programme and return to the initial settings,hold
the green key down for 3 seconds.
No sound
If on certain channels you receive a picture but have no sound,this means that you do
not have the correctTV system.Modify the SYSTEM adjustment (p.6).
Remote control
TheTV set does not react to the remote control;the orange indicator on theTV set
no longer flashes when you use the remote control? Replace the batteries.
Standby
When you switch theTV set on it remains in standby mode and the indication
CHILD LOCK is displayed when you use the keys on theTV set?The child lock function
is switched on (p.13).
To save electricity it is advisable to switch theTV set off using the ON/OFF key on the
front of the set.If the set receives no signal for 15 mins,it automatically goes into
standby mode.
Various
The menus appear in a different language? Re-select language choice (p.4).
Characters remain displayed on the screen?The MESSAGE function is switched on
(p.14).The key on the remote control no longer functions? Re-select
FAVOURITE PRG menu (p.7).
Still no results ?
If you have a problem with yourTV set,never attempt to repair it yourself:contact
your dealer's after-sales service.
Recycling directive
YourTV set uses materials which are reusable or which can be recycled.
To minimise the amount of waste in the environment,specialist companies recover used
sets for dismantling and collection of reusable materials (consult your dealer).

2020
16/9 (formats)..........................................10
Child lock..................................................13
Connections.............................................17
Decoder,
(CDV),(CDI) and Games ......17
Favourite programmes .............................7
Features.....................................................12
Fine tuning...................................................6
Headphones........................................12-18
Language used for menus ........................4
Menus.....................................................4-12
Messages....................................................13
Picture (adjustments).............................13
Programmable keys...................................8
Programme names.....................................7
Programme number display.....................9
Programmes................................................8
Programming............................................14
Remote control.........................................3
Selecting EXT sockets........................9-17
Sleeptimer.................................................13
"Smart controls"........................................8
Sort...............................................................5
Sound (adjustments)...............................12
Stereo/ mono/ NICAM (sound mode).9
Storing adjustments................................13
Systems........................................................6
Teletext......................................................15
Time (display)...........................................15
Tuning inTV channels...............................5
TV keys........................................................3
Video recorder (keys)........................9-17
EasyTune: A system for automatically installing and storing programmes.
PAL SECAM colour coding: PAL is used in the majority of European countries,
SECAM in France,the CIS and the majority ofAfrican countries.
The United States and Japan use a different system called NTSC.
RGB Signals: These are separate Red,Green and Blue signals which directly drive
the red,green and blue emmitterers in the cathode ray tube.
Using these signals provides better picture quality.
S-VHS Signals: These are 2 separate video signals from the S-VHS and HI-8 recording
standards.The luminance signalsY (black and white) and chrominance signals C
(colour) are recorded separately on the tape.This provides better picture quality
than with normal videos (VHS and 8mm),where theY/C signals are combined to
give only one signal.
Smart controls: Allow access to a series of picture and sound presets.
MONO sound: The sound is in mono when only one channel is transmitted.
STEREO sound: The sound is in stereo when the left and right channels are
transmitted separately.
NICAM sound: Process by which digital sound can be transmitted.
System :Television pictures are not broadcast in the same way in all countries.
There are different standards:BG,DK,I and L L' (France).
The SYSTEM adjustment is used to select these different standards.
16/9:Defines the length/height ratio of the screen.Wide screenTV sets have a ratio of
16/9,conventional screenTV sets have a ratio of 4/3.
Index
Glossary