Philips 43PUS6412/12 User manual

Published by YMC/SC 1734 Quality Subject to modification 3122 785 20321
2017-Aug-25
2016 © TP Vision Netherlands B.V.
All rights reserved. Specifications are subject to change without notice. Trademarks are the
property of Koninklijke Philips Electronics N.V. or their respective owners.
TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust
earlier supplies accordingly.
PHILIPS and the PHILIPS’ Shield Emblem are used under license from Koninklijke Philips Electronics N.V.
Chassis name Platform Model name
TPM17.1E LA MTK5596+333/334
43PUS6412/12
49PUS6412/12
55PUS6412/12
65PUS6412/12
49PUS6482/12
55PUS6482/12
49PUS7002/62
55PUS7002/62
49PUS7502/12
55PUS7502/12
65PUS7502/12
55POS9002/12
TPM17.1E
EU

1.Product inforamtion……….……………………………………………………………………………………3
2.Connections overview……..…..…..………………..…………………………………………………………4
3.Mechanical Instructions………………….…………………………………………………………………….5
Cable dressing (43" 6412 series)…………….……………………………………………………………5
Cable dressing (49" 6412 series)…………….……………………………………………………………5
Cable dressing (55" 6412 series)…………….……………………………………………………………6
Cable dressing (65" 6412 series)…………….……………………………………………………………6
Cable dressing (49"/55" 6482/7002 series)……………………………………………………………………7
Cable dressing (49"/55"/65" 7502 series)…………………………………………………………………………7
Cable dressing (55" 9002 series)…………………………………………………………………………8
Assembly/Panel Removal ………………………………………………………………………………………9
4.Service Modes…………….……………….………………….…………………………………………….….15
5.Software upgrading, Error Code and Panel Code………...……………………………………………..19
6.Circuit Descriptions…..……………………….………………………………………………………………24
7.IC Data Sheet……...……………………………………………………………………………………….…..32
8.Circuit Diagrams……………...……………………………………………………………………………….35
8.1 715G8620 PSU………………………………………………………………………..……………………35
8.2 715G8672 PSU………………………………………………………………………..……………………39
8.3 715G8682 PSU………………………………………………………………………..……………………43
8.4 715G8886 PSU………………………………………………………………………..……………………47
8.5 715G8579 SSB………………………………………………………………………..…………………51
8. 6 715G8465 SSB………………………………………………………………………..…………………74
8.7 715G8694 IR/LED Panel………………………………………………………………………………99
8.8 715G8623 IR/LED Panel………………………………………………………………………………100
8.9 715G8555 Keyboard control panel…………………………………..……………………………….101
8.10 715G7088 Keyboard control panel…………………………………..……………………………….102
9.Styling Sheet……………….…………………….……………………………………………………………..103
6412 series 43"…….………………………………………………………………………………………….103
6412 series 49"…….………………………………………………………………………………………….104
6412 series 55"…….………………………………………………………………………………………….105
6412 series 65"…….………………………………………………………………………………………….106
6482 series 49"…….………………………………………………………………………………………….107
7002 series 49"…….………………………………………………………………………………………….108
6482/7002 series 55"………………………………………………………………………………………….109
7502 series 49"/55"…………………………………………………………………………………………….110
7502 series 65"…………………………………………………………………………………………….111
9002 series 55"……………………………………………………………………………………………. 112

1. Product information

2. Connections Overview
CI
USB1
SERV.U
USB2
Headphone
HDMI1
HDMI2
HDMI3
HDMI4YPbPr
SAT
NETWORK
TUNER
AUDIO
OUT

3. Mechanical Instructions
3.1 Cable Dressing
Cable dressing (43" 6412 series)
Cable dressing (49" 6412 series)
ECN1161
ECN1108
ECN601 ECN1110
ECN1190
ECN1107
CN9201
CN9102
MAIN POWER SUPPLY
(1054)
A
IR/LED BOARD
(1056)
J
LOUDSPEAKER
(1184)
LOUDSPEAKER
(1184)
CN1190 CN1107
CN1161
CN1110
CN1108
C
N
60
1
WIFI MODULE
(Wifi01)
W
EY BOARD CONTROL
ECN601
ECN1108
ECN1110
SSB (1053)
B

Cable dressing (55" 6412 series)
Cable dressing (65" 6412 series)
ECN1108
ECN1190
ECN601
ECN1162
ECN601 ECN1110
ECN1107
ECN1161
CN9201
CN9102
MAIN POWER SUPPLY
(1054)
A
IR/LED BOARD
(1056)
J
LOUDSPEAKER
(1184)
LOUDSPEAKER
(1184)
CN1107 CN1190
CN1161
CN1110
C
N
60
1
WIFI MODULE
(Wifi01)
W
KEY BOARD CONTROL
E
SSB (1053)
B
CN1108
ECN1107
ECN1190
ECN1108 ECN601 ECN601
ECN1110

Cable dressing (49"/55" 6482/7002 series)
Cable dressing (49"/55"/65" 7502 series)
ECN1190
ECN1162
ECN1110
ECN1108 ECN601
ECN601
A MAIN POWER SUPPLY (1054)
SSB(1053)
AAA B
WWIFI MODUEL
W
LOUD SPEAKER(1184)
LOUD SPEAKER(1184)
IR BOARD (1056)
ECN1106
ECN1108
ECN1110
ECN1106
ECN1190
ECN601
ECN1160
ECN1161
ECN1190
ECN601
ECN1108
ECN601
KEY MODUEAL

Cable dressing (55" 9002 series)
ECN9201
CN9102
ECN1108
ECN603 ECN603
ECN1160
ECN1161
ECN1110
ECN1108
ECN603
CN9201
CN9102
SSB (1053)
B
MAIN POWER SUPPLY
(1054)
A
LED BOARD
(1068)
ALC
IR BOARD
(1056)
J
LOUDSPEAKER
(1184)
LOUDSPEAKER
(1184)
CN1190 CN1107
CN1160
CN1161
CN1110
CN
603
CN1108
CN
601
ECN601
WIFI MODULE
(Wifi01)
W
ECN1110
KEY BOARD CONTROLK
EE
ECN1190

3.2 Assembly/Panel Removal
3.2.1 Stand removal
1. Remove the fixation screws [1] that secure the stand
2. Take the stand bracket out from the set.

3.2.2 IR board Control Unit
1. Unplug the connector from the SSB.
Caution: be careful, as these are very fragile connectors!
1. Remove all the fixation screws [1] and connector from the IR board control unit.
3. Remove the IR lens, IR board from the DECO_REAR_COVER.
When defective, replace the whole unit.

3.2.3 Rear Cover
Warning: Disconnect the mains power cord before removing the rear cover.
1. Remove fixation screws [2] and [3] that secure the base assy..
2. Gently lift the rear cover from the TV. Make sure that wires and cables are not damaged while lifting the rear cover from the set.
( 6482 series)
(7502 series)

3.2.4 Keyboard Control Unit
1. Release the connector from the SSB Board.
Caution: be careful, the Keyboard is catch on the Back cover, please be careful to avoid damage the fragile connectors!
2. Remove all the fixation screws from the keyboard control panel [1] and take it out from the Back cover
When defective, replace the whole unit.
(49" 6482 series)
(55" 6482 series)

(55" 9002 series)
3.2.5 Small Signal Board (SSB)
Caution: it is mandatory to remount all different screws at their original position during re-assembly. Failure to do so may result in damaging the
SSB.
1. Release the clips from the LVDS connector that connect with the SSB[1].
Caution: be careful, as these are very fragile connectors!
2. Unplug all other connectors [2] .
3. Remove all the fixation screws from the SSB [3].
4. The SSB can now be shifted from side connector cover, then lifted and taken out of the I/O bracket.
3.2.6 Power Supply Unit (PSU)
Caution: it is mandatory to remount all different screws at their original position during re-assembly. Failure to do so may result in damaging the
PSU.
1. Gently unplug all connectors from the PSU.

3. Remove all fixation screws from the PSU.
3. The PSU can be taken out of the set now.
3.2.7 Speakers
1. Gently release the tapes that secure the speaker cables.
2. Unplug the speaker connector from the SSB.
3. Take the speakers out.
When defective, replace the both units.
3.2.8 WIFI module
1. Unplug the connector from the SSB..
2. Remove fixation screw that secure the WIFI module,
When defective, replace the whole unit.
3.2.9 LCD Panel
1. Remove the SSB as described earlier.
2. Remove the PSU as described earlier.
3. Remove the keyboard control panel as described earlier.
4. Remove the stand bracket as described earlier.
5. Remove the IR/LED as described earlier.
6. Remove the fixations screws that fix the metal clamps to the front bezel. Take out those clamps.
7. Remove all other metal parts not belonging to the panel.
8. Lift the LCD Panel from the bezel.
When defective, replace the whole unit.

4. Service Modes
4.1 Service Modes
The Service Mode feature is split into following parts:
 Service Alignment Mode (SAM).
 Factory Mode.
 Customer Service Mode (CSM).SAM and the Factory mode offer features, which can be used by the Service engineer to repair/align a TV set.
SAM and the Factory mode offer features, which can be used by the Service engineer to repair/align a TV set. Some features are:
 Make alignments (e.g. White Tone), reset the error buffer(SAM and Factory Mode).
 Display information (“SAM” indication in upper right corner of screen, error buffer, software version, operating hours,options and option codes,
sub menus).
The CSM is a Service Mode that can be enabled by the consumer. The CSM displays diagnosis information, which the customer can forward to the
dealer or call centre. In CSM mode, “CSM”, is displayed in the top right corner of the screen. The information provided in CSM and the purpose of
CSM is to:
 Increase the home repair hit rate.
 Decrease the number of nuisance calls.
 Solved customers’ problem without home visit.
Note: For the new model range, a new remote control (RC) is used with some renamed buttons. This has an impact on the activation of the Service
modes. For instance the old “MENU” button is now called “HOME” (or is indicated by a “house” icon).
4.2 Service Alignment Mode (SAM)
Purpose
 To modify the NVM.
 To display/clear the error code buffer.
 To perform alignments.
Specifications
 Operation hours counter (maximum five digits displayed).
 Software version, error codes, and option settings display.
 Error buffer clearing.
 Option settings.
 Software alignments (White Tone).
 NVM Editor.
 Set screen mode to full screen (all content is visible).
How to Activate SAM
To activate SAM, use one of the following methods:
 Press the following key sequence on the remote control transmitter: “062596”, directly followed by the “INFO/OK” button. Do not allow the
display to time out between entries while keying the sequence.
 Or via ComPair.
After entering SAM, the following items are displayed,
with “SAM” in the upper right corner of the screen to indicate that the television is in Service Alignment Mode.
How to Navigate
 In the SAM menu, select menu items with the UP/DOWN keys on the remote control transmitter. The selected item will be indicated. When not
all menu items fit on the screen, use the UP/DOWN keys to display the next/previous menu items.

 With the “LEFT/RIGHT” keys, it is possible to:
– (De) activate the selected menu item.
– (De) activate the selected sub menu.
– Change the value of the selected menu item.
 When you press the MENU button once while in top level SAM, the set will switch to the normal user menu (with the SAM mode still active in the
background).
How to Store SAM Settings
To store the settings changed in SAM mode (except the RGB Align settings), leave the top level SAM menu by using the POWER button on the
remote control transmitter or the television set. The mentioned exceptions must be stored separately via the STORE button.
How to Exit SAM
Use one of the following methods:
 Switch the set to STANDBY by pressing the mains button on the remote control transmitter or the television set.
 Via a standard RC-transmitter, key in “00” sequence.
Note: When the TV is switched “off” by a power interrupt while in SAM, the TV will show up in “normal operation mode” as soon as the power is
supplied again. The error buffer will not be cleared.
SAM mode overview
4.3 Factory mode:
Purpose
 To perform extended alignments.
Specifications
 Displaying and or changing Panel ID information.
 Displaying and or changing Tuner ID information.
 Error buffer clearing.
 Various software alignment settings.
 Testpattern displaying.

 Public Broadcasting Service password Reset.
 etc.
How to Activate the Factory mode
To activate the Factory mode, use the following method:
 Press the following key sequence on the remote control transmitter: from the “menu/home” press “1999”, directly followed by the
“Back/Return” button. Do not allow the display to time out between entries while keying the sequence.
After entering the Factory mode, we can see many items displayed, use the UP/DOWN keys to display the next/previous menu items
Factory mode overview
How to Exit the Factory mode
Use one of the following methods:
 Select EXIT_FACTORY from the menu and press the “OK” button.
Note: When the TV is switched “off” by a power interrupt, or normal switch to “stand-by” while in the factory mode, the TV will show up in “normal
operation mode” as soon as the power is supplied again. The error buffer will not be cleared.
4.4 Customer Service Mode (CSM)
Purpose
The Customer Service Mode shows error codes and information on the TVs operation settings.The call centre can instruct the customer (by
telephone) to enter CSM in order to identify the status of the set.This helps the call centre to diagnose problems and failures in the TV set before
making a service call.
The CSM is a read-only mode; therefore, modifications are not possible in this mode.
Specifications
 Ignore “Service unfriendly modes”.

 Line number for every
line (to make CSM language independent).
 Set the screen mode to full
screen (all contents on screen is visible).
 After leaving the Customer Service Mode, the original settings are restored.
 Possibility to use “CH+” or “CH-” for channel surfing, or enter the specific channel number on the RC.
How to Activate CSM
To activate CSM, press the following key sequence on a standard remote control transmitter: “123654” (do not allow the display to time out
between entries while keying the sequence). After entering the Customer Service Mode, the following items are displayed. use the Right/Left keys
to display the next/previous menu items
Note: Activation of the CSM is only possible if there is no (user) menu on the screen!
CSM Overview
How to Navigate
By means of the “CURSOR-DOWN/UP” knob (or the scroll wheel) on the RC-transmitter, can be navigated through the menus.
How to Exit CSM
To exit CSM, use one of the following methods.
 Press the MENU/HOME button on the remote control transmitter.
 Press the POWER button on the remote control transmitter.
 Press the POWER button on the television set.

5. Software Upgrading, Error code and Panel Code
5.1 Software Upgrading
Step 1: Ready for F/W Upgrade
1. Rename the software as “autorun.upg”
2. Prepare a USB memory.
3. Copy the software to USB flash disk(root directory).
Note the version of this F/W before you change the software file name.
Step 2: F/W Upgrade
1. Plug the USB memory on the USB port on the side I/O port of TV (Please connect to USB 2.0 port, not recommend USB3.0 port)
2. AC on (Power plug)
3. TV will take a few minutes the downloading to detect the software, and then upgrade automatically as detect the software

4. Press OK to start software upgrade
5. Upgrade in progress