Philips Magnavox TS3254 User manual

OW
C 0 L 0 R T E L E V I S I 0 N
AL
PHILIPS

NO
IMAGE
AVAI

SAFETYINSTRUCTIONS- Readbefore operatingequipment
This product was designedand manufactured to meetstrict quality and
safety standards. There are, however, some installation and operation
pre_:autionswhichyou should be particularly awareof.
1. ReadInstructions-Allthesafetyandoperatinginstructionsshould
bereadbeforetheapplianceisoperated.
2. RetainInstructions- Thesafetyandoperatinginstructionsshould
beretainedfor futurereference.
3. HeedWarnings- Allwarningsontheapplianceandintheoperating
instructionsshouldbeadheredto.
4. FollowInstructions- Alloperatinganduseinstructionsshouldbe
followed.
5. WaterandMoisture- Theapplianceshouldnotbeusednearwater
- for example,neara bathtub,washbowl,kitchensink,laundrytub,
in awetbasementor nearaswimmingpool,etc.
6. CartsandSlands- Theapplianceshouldbeusedonlywithacartor
standthatis recommendedbythemanufacturer.
6A. _ An applianceand cart combinationshould be moved
with care.Quickstops, excessiveforce, and uneven
surfacesmaycausetheapplianceandcartcombination
to overturn.
7. WallorCeilingMounting- Theapplianceshouldbe mountedto a
wallorceilingonlyasrecommendedbythemanufacturer.
8. Ventilation- Theapplianceshouldbesituatedsothatits locationor
positiondoesnotinterferewith its properventilation.Forexample,
theapplianceshouldnotbe situatedon a bed,sofa,rug,or sJmilar
surfacethat may blockthe ventilationopenings;or, placedin a
built-ininstallation,suchasa bookcaseor cabinetthatmayimpede
theflowofairthroughtheventilationopenings.
9. Heat-Theapplianceshouldbesituatedawayfrom heatsources
such as radiators, heatregisters, stoves, or other appliances
(includingamplifiers)thatproduceheat.
10. PowerSources- Theapplianceshouldbe connectedto a power
supplyonlyofthetypedescribedin theoperatinginstructionsor as
markedontheappliance.
11. Power-CordProtection-Powersupplycordsshouldbe routedso
thattheyarenot likelyto bewalkedon or pinchedbyitemsplaced
uponor against them, payingparticular attentionto cordsand
plugs,conveniencereceptacles,andthe pointwherethey exitfrom
theappliance.
12. Cleaning- Theapplianceshouldbecleanedonlyasrecommended
bythemanufacturer.
13. PowerLines- An outdoorantennashouldbe locatedawayfrom
power lines.
14. OutdoorAnlennaGrounding- Ifanoutsideantennaisconnectedto
the receiver,be suretheantennasystemis groundedsoas to
providesomeprotectionagainstvoltagesurgesandbuiltupstatic
charges.
Section810oftheNationalElectricCode,ANSI/NFPANo.70-1984,
providesinformationwithrespectto propergroundingofthemats
and supportingstructuregroundingof the lead-in wire to an
antennadischargeunit,sizeofgroundingconnectors,locationof
antenna-dischargeunit,connectionto groundingelectrodesand
requirementsforthegroundingelectrode.SeeFig.below.
15. Non-usePeriods- The powercordof theapplianceshould be
unpluggedfromtheoutletwhenleftunusedfor a longperiodof
time.
16. ObjeclandLiquid Entry- Careshouldbetakensothatobjectsdo
not fall andliquidsare not spilled intothe enclosurethrough
openings.
17. DamageRequiringService- Theapplianceshouldbeservicedby
qualifiedservicepersonnelwhen:
A. Thepowersupplycordortheplughasbeendamaged;or
B. Objects have fallen, or liquid has been spilledinto the
appliance;or
C. Theappliancehasbeenexposedtorain;or
D. Theappliancedoesnotappearto operatenormallyorexhibits
amarkedchangeinperformance;or
E. Theappliancehasbeendropped,ortheenclosuredamaged.
18. Servicing- Theusershouldnot attemptto servicetheappliance
beyondthatdescribedin theoperatinginstructions.All other
servicingshouldbereferredtoqualifiedservicepersonnel.
Note to the CATVsysteminstaller: This reminder isprovided to call the
CATVsystem installer's attention to Article 820-40 of the NEC that
providesguidelines for propergrounding and,in particular,specifies that
the cable ground shall be connected to the grounding system of the
building, asclose to the point of cable entry aspractical.
EXAMPLEOFANTENNAGROUNDINGASPERNATIONALELECTRICALCODE(NEC)
Example of An nna Grounding
asperNEC-National ElectricCode
GROUND CLAMP ANTENNALEADINWIRE
ANTENNADISCHARGEUNIT _c SECTIONalo-2e_
GROUNDINGCONDUCTORS(NecsecnoNSll-Zl|
GROUNDCLAMPS
-_"_""'_ POWERSERVICEGROUNDINGELECTRODESYSTEM(NecMTZH. eAmTHI
ELECTRICSERVICEEQUIPMENT
MAC3964

In_troduction
Welcome/Registration of Your TV ............................ 2
Safety/Precautions ..................................................... 3
Table of Contents ....................................................... 4
Features ...................................................................... 4
__._ On-Screen (MENU) Features
+ Setting the TV for Cable TV Operation ..5
+Adding Channels in Memory (Automatically)...6
+ Adding Channels in Memory (Manually) .......... 7
+How to Set the TV for Closed Captioning ........ 8
+ Setting the "IV for Stereo/SAP Programs ........... 9
<>Using the Incredible Stereo Feature ................. I0
,_'Using the TV Volume Bar Control ................... 11
,_"Setting the Surf/Smart Surf Control ................. 12
+Adjusting the TV Picture .................................. 13
+Setting the TV Sleep Timer Control ................. !4
+ Adjusting the Set Clock Control ....................... 15
+ Adjusting the Set Timer .................................... 16
+Setting the Timer ON/OFF ............................... 17
+ Using the TV Channel Reminder ..................... 18
+ Using the On-Screen Language Option ............ 18
+Using the Audio Out Jacks (with TV Speaker
On/Off Control) ................................................ 19
+ Using the TV's Audio/Video Input Jacks ....20-21
_] Remote Control Ooeration
using the smart Picture Control ................. 22
using the smart Sound Control .................. 23
Setting the "IV Remote to Work VCRs .............. 24-25
Setting the TV Remote to Work
Cable TV Converters .......................................... 26-27
Setting the TV Remote to Work VCRs or Cable
Converters - Search ltlethod .................................... 28
Using the Remote's VCR Buttons ........................... 29
_l Genoral Information
Tips if Something Isn t Working ................. 30
Glossary of TV Terms .............................................. 31
Index ........................................................................ 32
Factory Service Locations .................................. 33-34
Warranty ................................................................... 36
Use the simple Set-Up Guide (supplied with
your TV information packet) for details on:
•Antenna Hook-ups
• First Time Set-Up
(Automatic Settings)
• Basic TV and Remote
Control Operation
• On-Screen Menu Use
Infrared Remote Control works your TV set and a
variety of wireless remote control VCRs and Cable
Converters.
Standard broadcast (VHF/UHF) or Cable TV
(CATV) channel capability.
Stereo TV with built-in audio amplifier and twin
speaker system for receiving TV programs broadcast
in stereo sound.
Closed Captioning allows the viewer to read TV
program dialogue or voice conversations as on-
screen text.
Automatic Programming of Channels for quick
and easy selection of favorite stations available in
your area.
On-Screen Features (in either English, French, or
Spanish) show helpful messages for setting of TV
controls.
Audio/Video Jackpanel for direct connections with
VCRs (or other video accessories) providing quality
TV picture and sound playback.
Smart Button for the control of TV Sound and
Picture levels. Use the Smart Button on the remote to
quickly adjust Smart Sound (to keep volume levels
consistent during program changes or commercial
breaks); Smart Picture (for automatic picture adjust-
ments on a variety of program sources); and Smart
Surf (for quick one button channel selection, of up to
10 of your favorite channels).
Sleep-Timer automatically turns the TV OFF at pre-
set times.
Clock Timer feature can turn ON the TV at any pre-
set time - just like an alarm clock.
Copyright ©1997 Philips Consumer Electronics Company. All fights reserved.
4

m- OTE: If you went through
etup (in your Quick Use
Guide), this task has already been
completed for you.
You need to make sure that the TV
is set to pick up either Cable TV
stations or Antenna signals. In
other words, the TV needs to
know whether you have connected
a Cable TV signal or a normal
antenna to its ANTENNA plug.
the MENU button
Press (M)
on the remote, then press the
MENU • or • buttons to select
the word CABLE with the TV's
on-screen arrow.
<_ Press the (+) button (on the
TV or the remote) to select either:
YES- If you DO have Cable TV
connected to the TV.
Channels 1-125 can be
selected.
NO- If you have an Antenna
connected to the TV.
Channels 2-69 can be
selected.
<_ Press STATUS to clear the
Try it out. Press
CHANNEL •V buttons
and scartthe channels.
Remember, the TV has been set at
the factory to select certain chan-
nel numbers. See the following
page on how to set the "IV to
select the channels in your area.
S

OTE: If you went through
etup (in your Quick Use
Guide), this task has already been
completed for you.
Your TV can automatically set
itself for local area (or Cable TV)
channels. This makes it easy for
you to select only the TV stations
in your area when the CH(annel)
&• buttons are pressed.
_Press the MENU (M) button
on the remote, then press the
MENU •or • buttons to select
the word PROGRAM with the
TV's on-screen arrow.
_' ,_ Press the (+) button (on the
TV or the remote) to PROGRAM.
<:;_s Press the (+) button again to
tartthe TV search for area chan-
nels.
Flashing channel numbers will
count upward on the screen as the
TV looks for channels to "ADD".
Press any button (on the TV or
remote) to stop the channel search
at any time. When the channel
search is completed the TV will
return to the last viewed channel.
Press STATUS button
[ thescreen
to clear
Try it out. Press CHAN-
m NEL •• buttons and see
which channels have been added.
Remember, if you want to drop any
unwanted channels from the TV's
memory, see the next page on how
to "Manually" add and delete chan-
nels.
Note: As the "IV searches for chan-
nels to "ADD" into memory the on-
screen display may move (or jitter
slightly). This is normal operation
and does not indicate a need for ser-
vice.
"RED" channel numbers have been
added to the TV's memory.
"WHITE" channel numbers are not
in the TV's program memory.
The "IV screen will be blocked off
until the search for channels is
done. I

m- uto Programming (see previous
page) adds all the channels it
can find (on your Antenna or Cable
TV system) into the TV's memory.
AddlDelete Channels makes it easy
for you to add other channels, or
drop unwanted channels, from the
list of channels in the TV's memory.
<.,._ Press the MENU (M) button
on the remote, then press the
MENU • or • buttons to select
the word CHANNEL with the
TV's on-screen arrow.
_Press the CHANNEL •or •
[ buttons (or Channel Number but-
Itons on the remote) to select the
Ichannel you want to SAVE (or
DELETE.)
<_ _ Press the (+) button to SAVE
the selected channel number into
memory.
Press the (-) button to DELETE
a channel from memory.
_Press the STATUS button to
lear the screen after adding all
e channels yo_ant.
Try iteout. Press the
CHANNELA• buttons.
The channels you SAVED should
appear. 4l'he channels you
DELETED should not appear.
Remember, you can also add the
VCR/AUX mode (see page 20)
into the TV's channel memory.
Then by pressing the CH • •
buttons you can quickly select the
Audio/Video Input jacks on the
rear of the TV. Just "SAVE" the
VCR/AUX mode (located between
the lowest and highest channel
numbers) into the TV's memory.

U_2
m['llosed Captioning allows you to
_J read the voice content of televi-
sion programs on the TV screen.
Designed to help the hearing
impaired this feature uses on-screen
"text boxes" to show dialogue and
conversations while the TV pro-
gram is in progress.
_,_ Press the MENU button
(M)
on the remote, then press the
MENU • or • to select the word
CAPTION with the TV's on-screen
arrow.
_,,P_ Press the (+) button to select
the desired Closed Caption (CC)
mode - For Example: CAPTION 1.
CAPTION 1, 2, 3, or 4 mode:
dialogue (and descriptions)
for the action on the captioned
TV program shows on-screen.
(See important note on this
page.)
TEXT 1, 2, 3, or 4 mode:
often used for channel guide,
schedules, or bulletin board
information for CC programs.
Note: Usually "CAPTION" 1 is the
most used mode to view captioned
material.
_.' ,_ Press the STATUS button after
making your Caption mode selec-
tion.
The TV display will clear and
Captioning material (if available
on the currently selected TV pro-
gram) will appear on the TV
screen.
To cancel, set the CAPTION fea-
ture to OFF when finished viewing.
Remember, broadcast sta-
tions will often use spelling
abbreviations, symbols,
dropouts and other grammatical
shortcuts in order to keep pace with
the on-screen action. These type
factors vary upon the source of the
captioned text material and do not
indicate a need for service on the
part of the TV.
NOTE: Not all TV programs and product commercials are made for broadcast
with Closed Caption (CC) information included. Neither are all Closed Caption
modes (CAPTION 1-4, or TEXT 1-4)) necessarily being used by a broadcast sta-
tion during the transmission of a closed caption program. Refer to your area's "IN
program listings for the stations and times of Closed Caption shows.
NOTE: The "CCI W/MUTE" setting automati-
cally switches the TV to the Closed Caption 1
mode whenever the MUTE button (on the remote
control) is pressed. The Closed Caption I mode
will turn OFF when the TV sound is returned or
unmuted.
CAPTION mode Example Display
TEXT mode Example Display
"IV screen will he blocked from viewing
6
This symbol will appear with channels that
contain Closed Captioning material.

OteUrTV can receive broadcast
reo TV programs. The TV
has both an amplifier and twin
speakers through which the stereo
sound can be heard.
<_ Press the MENU (M) button
on the remote, then press the
MENU • or • buttons to select
the word STEREO with the TV's
on-screen arrow.
<_ Press the (+) button to turn the
ISTEREO MODE ON.
,_ Press STATUS to clear the
screen. O
IS
not present on a selected
show and the TV is placed in
the STEREO mode, the sound
coming from the set will remain
monaural (mono.)
SAP is an additional part of the
stereo broadcast Sent as a
• system.
third audio channel SAP can be
heard apart from the current TV
program sound. TV stations are
.t
free to use SAP for any number
of purposes, but many experts
believe it will be used for foreign
language translations of TV
shows (or for weather and news
bulletins.)
If a SAP signal is not present
with a selected program, the SAP
option cannot be selected. Also, if
SAP is selected on a channel
(with SAP) and you select anoth-
er channel, when you return to
the original channel SAP will be
OFF (and you will have to rese-
lect the SAP feature.) SAP ®
9

he Incredible Stereo feature
an be turned ON by using the
Sound Image control. Sound Image
adds greater depth and dimension
to both monaural (MONO) and
stereo 73/sound. With the control
turned ON the TV's speakers can
add even wider sound separation
to normal broadcasts.
<_-_ Press the MENU (M) button
on the remote, then press the
MENU • or • buttons to select
the word SOUND IMAGE with
the TV's on-screen arrow.
<_ Press the (+) button to turn the
I SOUND IMAGE control ON.
<_ Press STATUS button to clear
Ithescreen.
10

me U_h e the Volume Bar control to see
e TV's volume level settings
on the TV screen. Once set the
Volume Bar will be seen each time
the VOLUME buttons (on the TV or
remote) are pressed.
.,.'2-..
<I,,,_ Press the MENU (M) button on
the remote, then press the MENU •
or • buttons to select the words
VOL BAR with the TV's on-screen
Arrow.
/, _Press the (+) button to turn the
<'_ VOL BAR control ON.
<_. Press STATUS button to clear
the screen. @
11

<
A"list" or series of previously
viewed channels can be selected
with the SURF button on your
remote control. With this feature you
can easily switch between different
TV programs that currently interest
you. The Smart Surf control allows
you to set up to 10 channels in its
quick viewing "list".
._ Press the MENU (M) button on
e remote, then press the MENU •
or •buttons to select the word
SURF with the TV's on-screen arrow
(or press the SMART button on the
remote).
_Press the button select
(+) to
either 2-Channel Surf or Smart Surf.
See explanation of Surf options with
the illustration on this page.
_.'_ Press STATUS button to clear
the screen. I_
C-a-d-d 3
_1_ With the Smart Surf control
ON (see above), select a desired
channel for viewing. You can use the
number buttons on the remote (or the
Channel •or • buttons).
_'_.2_ Press the SURF button the
on
remote. (Some channel numbers may
already appear within the Surf chan-
nel list.) .t
-_ _Press the Menu button to
"ADD" the selected channel to the
Surf list.
Select the next desired channel and
repeat steps 2 and 3. Continue until
all desired channels are on the Surf
list.
_Press the SURF button on the
remote to quickly review current
action on channels contained within
the Surf list. O
2 CHANNEL SURF -
Current and one previ-
ous channel.
SMART SURF -
Current and up to nine
additional channels
available. Note: the
Channel Surf can be
lsed with fewer than
ten channels, in this
way the number of
Surf channels can
match or fit your pre-
sent viewing interests.
=888
Below is the on-screen menu that
will appear when the SMART but-
ton on the remote is pressed. Then,
by using the MENU • or Y, and
the + or - buttons, adjustments can
be made to the SURF control.
SMART
PICTURE
SOUND
DSURF
__ @ L
To Use 2-
Channel Surf:
With the 2-Channel
Surf control ON,
select the two
desired channels for
viewing with the
number buttons on
the remote control.
Press the SURF
button on the
remote to "toggle"
between the two
selected channels.
When using Smart
Surf:
A "SURF MENU
TABLE FULL"
message will appear
on-screen when the
maximum of 10
channels has been
added to the Smart
Surf list.
22
11
s
25
PRESS MENU TO ADD
PRESS MENU TO DELETE
Note: To Delete a channel from the
Surf list just press the SURF button to
select the desired channel. Then press
the MENU button and the channel will
be immediately dropped from the on-
screen Surf list.
12

me Zt o adjust your TV picture con-
rols, select a channel and follow
the steps shown below:
_,J_ Press the MENU (M) button on
the remote, then press the MENU •
or •buttons until the desired con-
trol shows on-screen.
_Press the (+) and (-) buttons to
adjust the selected color control.
,_ Press the STATUS button to
Iclear the screen when picture adjust-
Imenarec°mp;"
Remember, when the bar
scale is centered, the control set-
tings are at normal mid-range levels.
BRIGHTNESS Press (-) or (+) until
darkest parts of the picture are as bright
as you prefer.
PICTURE Press (-) or (+) until lightest
parts of the picture show good detail.
COLOR Press (-) or (+) to add or elim-
inate color.
TINT Press (-) or (+) to obtain natural
skin tones.
SHARPNESS Press (-) or (+) to
improve detail in the picture.
13

Veyou ever fallen asleep in
nt of the TV only to have
it wake you up at two in the
morning with a test pattern
screeching in your ears? Well,
your TV can save you all that
trouble by automatically turning
itself off. t-ag_m3
J_
%12 Press the SLEEP button on
the remote.
Note: You can also press the
MENU • or • on the remote or
TV to select the word SLEEP
with the TV's on-screen arrow.
_,_ Press the SLEEP button
repeatedly to pick the amount of
time (15 minutes to 2 hours
ahead) before the TV will turn
itself off.
The (+), (-) buttons can also be
used to set the amount of time.
_ _ Press the STATUS button to
clear the screen after you have
set the time for the TV to turn
off.
A few seconds before the TV is
to shut off a message will come
on the screen telling you GOOD
NIGHT. @
Remember, to see how
m many minutes are left
before the TV shuts itself off,
press the STATUS button on the
remote.
To stop a SLEEP TIMER setting,
reset the timer back to OFF.
(Turning the TV off and on, or
pressing a button during the last
minute of a timer setting, will also
cancel a setting.)
14

OTE: If you went through First
me Setup (page 2 of the Quick
Use Guide), this task has already
been completed for you.
Your TV comes with an on-screen
clock. During normal use the clock
shows on the screen with every chan-
nel change (and when the STATUS
button is pressed.)
_ Press the MENU (M) button on
the remote, then the MENU •or •
buttons to select the words SET
CLOCK with the TV's on-screen
alTOW.
A
<_2_ Press (-) button to set the hour
(and AM or PM) parts of the clock.
Press (+) button to set the minutes
part of the clock.
,_ Press STATUS button to set the
clock in operation and clear the
screen.
Remember, the remote's
number buttons can also be
used to enter the time. Be sure to
press "0" first for single digit hour
entries. Press the 0 or 1 number but-
tons for the clock's AM or PM set-
tings.
PRESS-TO PRESS+TO
SETHOURS $ETI
15

like an alarm clock you
can set the TV to turn itself on
at the same time everyday.
([BEGIN)
_;> Press (M) on
MENU button
the remote, then press the MENU
• or • buttons to select the
words SET TIMER with the
TV's on-screen arrow.
_,_ Press the (-) button on the
remote to set the hour you want
the TV to turn itself ON. (Also
press the (-) button for the correct
AM or PM setting).
Press the (+) button on the
remote to set the minutes part of
the timer clock.
$_,,'_ Press the STATUS button to
set the "ON TIME" and clear the
screen. O
PRESS-T0 PRESS+T0
SETHOURS SET MINUTE
:i:,:,..
=888
16
Remember, li
the TIMER SET-
TING will not take
place unless the
TIMER Menu con-
trol is also set to
"ON". (See TIMER
control section).
The remote's num-
ber buttons can also
be used to set the
clock. Be sure to
press "0" first for
single digit hour
entries. Press the 0
or 1 number buttons
for the clock's AM
or PM settings.

_theryou have set the timer to
e correct time, this feature
allows you to turn the timer ON
or OFF.
<_ Press MENU (M) button on
the remote, then press the MENU
• or • buttons to select the
word TIMER with the TV's on-
screen arrow.
<_ Press the (+) button on the
remote to choose between the
ON or OFF selection.
<_ Press the STATUS button to
save the TIMER setting and clear
the screen.
Remember a
to select SET
TIMER and enter
the time you want
the TV to turn on.
17

IH7 ith the Reminder control
rvON the TV automatically
shows you the current time and
channel every thirty minutes.
_.._ Press the MENU (M) button
on the remote, then press the
MENU • or •buttons to select
the word REMINDER with the
TV's on-screen arrow.
_Press the (+) button to turn
REMINDER ON.
_"_ Press STATUS button to
clear the screen.
m. Oprour French and Spanish
eaking TV owners an on-
screen LANGUAGE option is pre-
sent. With the LANGUAGE con-
trol you can set the TV's on-screen
features to be shown in either
English, French, or Spanish text.
_1_ Press the M_NU (M) button
on the remote, then press the
MENU • or • buttons to select
the wordtLANGUAGE with the
TV's on-screen arrow.
Press the button select
(+) to
either the English, French
(FRANCAIS), or Spanish
(ESPANOL) language option.
Text for the on-screen Menu will
change to the selected language.
<,_'_ Press STATUS to clear the
I
IDLANGU
=888
Remember, !
If you went
through Setup (in
€ourQuick Use
Guide), this task has
already been complet-
ed for you.
The Language control
only makes the TV's
on-screen (MENU)
items appear in
French or Spanish
text. It does not
change the language
of other on-screen
text features such as
Closed Captioned
(CC) TV shows.
18

m- Uldyou like to hear TV pro-
rams through your audio hi-
fi system? The TV's Audio Output
jacks and TV Speaker On/Off con-
trol work together to offer you this
TV sound option.
<_-_ Connect the R(ight) and
VL(eft) AUDIO OUT jacks on the
TV to the R and L Audio Input
jacks on your amplifier or sound
system.
Set the audio system's volume to
normal listening level.
(_,_ Turn the TV and audio system
ON. You can now adjust the sound
level coming from the audio sys-
tem with the Volume • or • but-
tons on the TV or remote.
<3,_._ To hear the TV sound from
only the audio system speakers,
select the TV's SPEAKER on-
screen control.
Press the MENU (M) button on
the remote, then press the MENU
• or • buttons to select the word
SPEAKER with the TV's on-
screen arrow.
<,_.._ Press the (+) button to turn the
TV s internal speakers OFF.
You should now only hear TV
sound coming from the audio sys-
tem speakers.
<_ Press the S_ATUS button to
RCA PHONO PLUG
:NOT SUPPLIED)
AUDIO 0_-]
(RED/WHITE) I
-!2
¥¥
!ii!!iilii!y.........
AUDIO SYSTEM
19

yv u can view the playback of
CR tapes (Video Disc
Players, camcorders, etc). by
using the AUDIO and VIDEO
INPUT jacks (on the rear of the
TV).
For example: to view the play-
back of a VCR tape:
<'1_ Connect the VIDEO and
AUDIO IN(put) jacks on the
TV to the AUDIO and VIDEO
OUT(put) jacks on the VCR.
<Z,_ Press the MENU (M) button
on the remote, then press the
MENU • or • buttons to select
the word INPUT with the TV's
on-screen arrow.
Note: You can press the CHAN-
NEL •• buttons to select
"VCR/AUX" (if it has been
added to the TV's channel mem-
ory.) See page 7 for details.
<_-_ Press the (+) button to select
I he VCR/AUX(iliary) INPUTS
on the rear of the TV.
<@ Turn the VCR ON and
PLAY the VCR tape to be
viewed on the TV.
O
using the A/V
INPUT_acks, return the INPUT
display screen on the TV to
ANTENNA. If you leave the TV
in the VCR/AUX INPUT mode
and there is no signal source con-
nected to the jacks, you will be
seeing only a blank screen on the
TV.
NOTE: If you have a mono (sin-
gle audio OUTPUT) VCR, "Y"
Connectors are available (from
your dealer or Parts Information
Center 18130292-6066) to con-
nect to the audio inputs on the TV.
PICTURE AND SOUND FROM PLAY-
BACK OF VCR TAPE
,:.. •
A #" q
VIDEO IN
(YELLOW)
VIIDNEO
tL
IRCA PHONO PLUG
CA,, ES(NOTS,,P
I l PL,EO,
AUDIO IN
(RED/WHITE)
VCR
(EQUIPPED WITH VIDEO AND
AUDIO OUTPUT JACKS)
NOTE: THE "I'V/VCR" BUTTON
CAN ALSO BE USED TO PLACE
THE TV IN THE VCR/AUX MODE
(AS WELL AS SELECT CHANNELS
3 OR 4.)
20