PI Manufacturing PIPS-UPS-12V5V User manual

Operation Manual
PIPS-UPS-12V5V Specications
Input Voltage (VAC)
Output Voltage
Usage
Battery
Charging Time
Operating Environment
Unit Dimensions 5.11"x2.64"x1.02"
(130x67.3x26mm)
Temperature 32°F - 104°F
Humidity: 20~90%
(0°C to 40°C)
8 hours
7800mAh
8 hours (normal use)
DC Port: 12V DC / 2.5A
USB Port: 5V DC / 2A
100-240V AC
Introduction
7800mAh UPS Battery Backup with
12V DC and USB Ports
Most homes or even small businesses don't include a
backup power solution in case there is a power failure.
An alternative is to use an Uninterruptible Power
Supply or UPS. A UPS allows you to keep your devices
powered on, even when there is a power failure. The
PIPS-UPS-12V5V is a portable UPS battery backup
solution that provides a 12V DC and 5V USB port,
allowing you to power devices such as cameras,
portable routers, lights, and more. The unit includes a
7800mAh battery, typically providing up to 8 hours of
usage under normal conditions. Built-in over charging
protection, discharging, and short circuit protection
provides safety for your devices.
Operation
1. Connect a 12V DC power adapter to the input. This
will plug into the AC socket on the wall
2. Connect the device you will be powering with the
included DC cable from the output port
3. If you have a 5V USB device, you can use the USB port
to power / charge your device
4. A 7800mAH lithium-ion battery is included for
providing up to 8 hours of usage (under normal
conditions). To charge the UPS battery backup, it
typically takes 8 hours
5. A red LED indicates the unit is charging. A solid green
LED indicates the unit is full charged
6. Charge the unit at least once a month to extend the
batteries service life
1. Check the voltage, polarity, and current requirements
of your device before connecting the unit
2. Please charge the unit fully before initial use
3. The unit contains lithium batteries
4. Do not disassemble the unit. There are no user
serviceable parts inside
5. Do not expose the unit to re or excessive heat
6. Do not expose the unit to water
7. Dispose of the unit in accordance with environmen-
tal regulations
Features
• UPS battery backup with 12V DC and 5V USB ports
• Use as a portable power backup for security cameras,
portable routers, lights, and more
• Power 12V DC devices up to 2.5A
• Power 5V USB devices up to 2A
• 7800mAh battery capacity (typically provides up to 8
hours of usage under normal conditions)
• Can be used to power both the 12V DC and 5V USB
devices simultaneously
• Smart circuitry provides protection from overcharg-
ing, discharging, short circuit
• 8 hour charge time
• Standard 0.5ft DC cable included for connection to
12V DC devices
• Unit is charged via standard 2.1mm DC jack
WARNING:
Input
LED
USB Output
Provides Up to 2.5A Output
Provides Up to 2A Output
7800mAH
Built-in
Lithium-Ion
Battery
What’s Included
Package Includes 1 - UPS Battery Backup
1 - 2.5mm DC to 2.5mm DC
cable (Used on Output Port)
1 - User Manual
Input
LED
USB Output