Pico Macom MOR-LCD4 User manual

Installation and
Operation Manual
MOR-LCD4
Quad Color LCD Monitor
Operation
Manual
Rev. 07/08
Ph: 800-421-6511 www.picomacom.com

MOR-LCD4
2
Rev. 07/08
Ph: 800-421-6511 www.picomacom.com
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of un-insulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Product Inspection
Inspect the equipment for shipping damage. Should any damage be discovered, immediately file a claim with the carrier.
Important Safety Instructions
To insure proper installation and operation, take a moment to read this guide before proceeding with the installation. If you have any questions
or comments about the MOR-LCD4 Quad Color LCD Monitor, please contact your dealer or have him contact the PICO MACOM Service Center at
these phone numbers: 800-421-6511, 818-493-4300.
1. Read Instructions: All safety and operating instructions should be
read before the appliance is operated.
2. RetainInstructions:Thesafetyandoperatinginstructionsshouldbe
retained for future reference.
3. Heed Warnings: All warnings on the appliance should be adhered
to.
4. Follow Instructions: All operating and user instructions should be
followed.
5. Cleaning: Unplug this appliance from the wall outlet before
cleaning. Use a damp cloth for cleaning. Do not use liquid cleaners
or aerosol cleansers.
6. DoNotUse Attachments:Useofattachmentsnotrecommendedby
the manufacturer may cause hazards.
7. Water and Moisture: Do not use this product near water—for
example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool—and the like.
8. Accessories: Do not place this product on an unstable cart, stand,
tripod, bracket, or table. The product may fall, causing serious injury
to a child or adult, and serious damage to the appliance.
9. Ventilation: This video product should never be placed near or
over a radiator or heat register. This video product should not be
placed in a built-in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s instructions have
been adhered to. Any slots or opening in the cabinet are provided for
ventilation. To ensure reliable operation of the video product and to
protect it from overheating, these openings must not be blocked or
covered. Openings should never be blocked by placing the product
on a bed, sofa, rug, or other similar surface.
10. Grounding or Polarization: This video product is equipped
with either a three prong plug for 110 VAC use or a two prong flat
blade 220 volt type plug. Each type is to be inserted into only the
type of receptacle for which they specifically designed. Do not cut
off the round grounding pin in order to be able to fit into a two prong
receptacle as this could cause injury and will void the warranty.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE. DO NOT OPEN THE CABINET.
REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION
CORD RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED
TO PREVENT BLADE EXPOSURE.
ATTENCION: POURPREVENIRLESCHOCSELECTRIQUES,NEPASUTILISERCETTEFICHEPOLARISEEAVEC
UNPROLONGATEUR,UNEPRISEDECOURANTOU UNEAUTRE SORTIEDECOURANT,SAUFSI
LESLAMESPEUVENTETREINSEREESAFONDSANSENLAISSERAUCUNEPARTIEADECOUVERT.
Safeguards

MOR-LCD4
3
Rev. 07/08
Ph: 800-421-6511 www.picomacom.com
Safeguards
11. Power Sources: This product should be operated only from the type
of power source indicated on the marking label. If you are not sure
of the type of power supplied to your home, consult your appliance
dealer or local power company.
12. Power-cord Protection: Power-supply cords should be routed
so they are not likely to be walked on or pinched by items placed
upon or against them. Pay particular attention to cords and plugs,
convenience receptacles, and the point where they exit from the
appliance.
13. Lightning: For added protection for this product during a lightning
storm, or when it is left unattended or unused for long periods of time,
the unit should be disconnected from power source.
14. Power Lines: An outside antenna system should not be located
in the vicinity of overhead power lines, other electric light or power
circuits, where it can fall into such power lines or circuits. When
installing an outside antenna system, extreme care should be taken to
keep from touching such power lines or circuits as contact with them
may be fatal.
15. Overloading: Do not overload wall outlets and extension cords as
this can result in risk of fire or electric shock.
16. Object and Liquid Entry: Never push objects of any kind into this
product through openings as they may touch dangerous voltage
points or short-out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the product.
17. Servicing: Do not attempt to service this product yourself as
opening or removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service personnel.
18. DamageRequiring Service: Unplugthisproduct from thewalloutlet
and refer servicing to qualified service personnel under the following
conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the
operating instruction. Adjust only those controls that are covered
by the operating instructions. An improper adjustment may result
in damage and will often require extensive work by a qualified
technician to restore the product to its normal operation.
e. If the product has been dropped or the cabinet has been
damaged.
f. When the product exhibits a distinct change in performance—
this indicates a need for service.
19. Replacement Parts: When replacement parts are required, be sure
the service technician has used replacement parts specified by the
manufacturer or have the same characteristics as the original parts.
Unauthorized substitutes may result in fire, electric shock or other
hazards.
20. Safety Check: Upon completion of any service or repairs to this
product, ask the service technician to perform safety checks to deter-
mine that the product is in proper operating conditions.
21. Outdoor Antenna Grounding: Before attempting to install this
product, be sure the antenna or cable system is grounded so as to
provide some protection against voltage surges and built-up static
charges.
a. Use No.10 AWG (5.3mm) copper, No.8 AWG (8.4mm) alu-
minum, No.7 AWG (10mm) copper-clad steel or bronze wire or
larger, as ground wire.
b. Secure antenna lead-in and ground wires to house with stand-
off insulators spaced from 4 feet (1.22m) to 6 feet (1.83m) apart.
c. Mount antenna discharge unit as close as possible to where
lead-in enters house.
d. A driven rod may be used as the grounding electrode where
other types of electrode systems do not exist. Refer to the
National Electrical Code, ANSI/NFPA 70-1984 for information.
e. Use jumper wire not smaller than No.6 AWG (13.3mm) copper
or equivalent, when a separate antenna grounding electrode is
used.
NOTE TO THE CATV SYSTEM INSTALLER
THIS REMINDER IS PROVIDED TO CALL THE CATV SYSTEM
INSTALLER’S ATTENTION TO ARTICLE 820-22 OF THE NEC
THAT PROVIDES GUIDELINES FOR PROPER GROUNDING
AND, IN PARTICULAR, SPECIFIES THAT THE CABLE
GROUND SHALL BE CONNECTED TO THE GROUNDING
SYSTEM OF THE BUILDING, AS CLOSE TO THE POINT OF
CABLE ENTRY AS PRACTICAL.

DSP806
4
Rev. 01/03
Ph:800-421-6511 www.picomacom.com
MOR-LCD4
Descriptions
Quad Color LCD Monitor
4
Rev. 07/08
Ph: 800-421-6511 www.picomacom.com
Ultra-compact
design allows
four monitors in
two standard EIA
rack units for quick
at a glance reference
High resolution display, 960 x 234
pixels provides crisp picture and
less eye strain
Ultra high brightness LCD panels
with 300 candle luminance ensures
viewable picture under all lighting
conditions
Individual color, tint, brightness
and contrast controls enables
individual adjustment of each
monitor independently
90 degree vertical tilt adjustment
while mounted in rack ensures
comfortable viewing at any rack
elevation
Multi-format auto source
recognition for compatibility with
both NTSC and PAL formats
Composite and S-video inputs
provides multiple connection
options for easier installation
Impedence match switch ensures
compatibility with looped video
systems
UL approved external universal AC
power adapter for domestic and
international use
The Pico Macom MOR-LCD4 rack mount video display chassis is comprised of four
high performance 4˝ color LCD monitors, in a swivel chassis that mounts in 3RU of a
standard EIA 19inch rack. Each of the four high-resolution (480 x 234 pixel) active matrix
LCD panels has its own set of controls for color, tint, contrast, and brightness. Ultra high
brightness LCD panels (300 candle luminance) and excellent contrast ratio ensures
excellent picture with a wide viewing angle under all lighting conditions. The swivel
mount chassis allows the MOR-LCD4 to be mounted at any rack elevation, and by
tilting the panel, provide optimum viewing angle. The multi-format auto source
recognitionensurescompatibilitywithbothNTSC/PALforuseindomesticandinternational
applications. Installation is simplified by the composite and S-video inputs, and the
impedence match switch which allows installation in home-run and looped video
distribution systems. Pico Macom’s MOR-LCD4 comes standard with a UL approved
universal external power adapter for low power consumption and cool operation in
domestic and international operation. Pico Macom warranties this product for one year.
MOR-LCD4
Quad Color LCD Monitor

DSP806
5
Rev. 01/03
Ph:800-421-6511 www.picomacom.com
MOR-LCD4
Specifications
5
Rev. 07/08
Ph: 800-421-6511 www.picomacom.com
Headend Equipment Racks and Shelves
Ordering Information
MOR-LCD4 Rack mount Quad video display
Video Inputs – Per Display
Composite Video 1x via BNC Connector (Looping)
S-Video 1x via 4-Pin Mini-DIN Connector
Controls – Per Display
Mirror Image Switch Right to Left Reverse
Video Adjustments Brightness, Contrast, Color
Source Selection Composite or S-Video Input
Power On/Off Switch
General
Aspect Ratio 4:3
Display Element Active Matrix TFT
TV Standards NTSC – PAL Auto-detect
Vertical Frequency NTSC:60Hz, PAL:50Hz
Horizontal Frequency NTSC:15.75KHz, PAL:15.625KHz
Limited Warranty
1 Year Limited Warranty
Mechanical
Size (H-W-D) 5.25”x19”x3”(133x482x76mm)
Weight (Net) 4.4 lbs (2 kg)
Rackmount Type 3 RU – Tilt Up/Down
Environmental
Operating Temperature +32° to +140° F (0° to +60° C)
Operating Humidity Up to 85%, Non-condensing
Storage Temperature -13° to +140° F (-25°to +60° C)
Storage Humidity Up to 85%, Non-condensing
Power Requirement
Input: 100-240 Vac/1.0A
47-63 Hz
Output: 12Vac, 4.0 A
15 Watts
Regulatory Approvals
Monitors FCC, CE
Power Supplies UL, CE, CSA
Accessories Included
1x Operations Manual
4x BNC Tee For Looping Input use
4x Rackmount Screws
1x AC Power Adapter 100-240VAC to 12VDC @ 4A
Specifications
AV
12
1
AV
12
2
AV
12
3
AV
12
4
PICO MACOM
12V DC
®
DC:12V MAX:20W RIPPLE:0.5Vp-p
NO.:
H41P000021
MADE IN TAIWAN R.O.C.
LOW HI
LOW HI
VIDEO S-VIDEOVIDEO S-VIDEOVIDEO S-VIDEO
LOW HILOW HI
VIDEO S-VIDEO
MOR-LCD4
Front View
Rear View

MOR-LCD4
6
Rev. 07/08
Ph: 800-421-6511 www.picomacom.com
Operation and Controls
AV
12
1
AV
12
2
AV
12
3
AV
12
4
PICO MACOM
12V DC
®
DC:12V MAX:20W RIPPLE:0.5Vp-p
NO.:
H41P000021
MADE IN TAIWAN R.O.C.
LOW HI
LOW HI
VIDEO S-VIDEOVIDEO S-VIDEOVIDEO S-VIDEO
LOW HILOW HI
VIDEO S-VIDEO
MOR-LCD4
1
2
3
3
4
567
8 9 10 11
Panels
1. LCD Screen:
Displays video from selected video source.
2. Power On:
Press this button to activate or deactivate unit.
3. Video Input Indicator Lights:
Indicates type of video input when lit.
4. Input Selector:
Toggles between composite and s-video inputs.
5. Brightness Control:
Controls brightness level.
6. Hue Control:
Controls color (hue) level.
7. Contrast Control:
Controls amount of contrast.
8. Video:
Composite video input port.
9. S-Video:
S-video input port.
10. Low/Hi:
Slide switch to “HI” position when using BNC-T type
connectors. Slide switch to “LOW” position with direct video
input.
Note: If picture appears too light or dark, slide switch to opposite
position.
11. Wall Adaptor Jack:
Connect wall transformer to this jack.

MOR-LCD4
7
Rev. 07/08
Ph: 800-421-6511 www.picomacom.com
Warranty
Limited Warranty*
Pico Macom warrants to the original purchaser that all of its new products are of sound design, quality materials and workmanship at the
time of manufacture and will be free from related defects for one year from the original purchase date. Pico Macom will repair or, at its
discretion, replace without cost to the original purchaser, the product which, upon inspection by Pico Macom, appears to be defective or
not conforming to factory specifications. Pico Macom will cover the cost of parts, labor, and return freight from factory.
Warranty Limitations
This warranty excludes coverage of damage or inoperability resulting from (1) use or installation other than in strict accordance with
Pico Macom’s written instructions, (2) disassembly or repair by someone other than Pico Macom or a Pico Macom authorized repair
center, (3) misuse, misapplication or abuse, (4) alteration, (5) lack of reasonable care or (6) wind, ice, snow, rain, lightning, power surges,
excessive heat, or any other weather conditions or acts of God. Pico Macom’s warranty with respect to third-party proprietary
sub-assembly modules and/or private-label products are limited to the duration and terms of third-party vendors’ warranty. Pico Macom
shall in no event and under no circumstances be liable or responsible for any consequential, indirect, incidental, punitive, direct or special
damages based upon breach of warranty, breach of contract, negligence, strict tort liability or otherwise or any other legal theory, arising
directly or indirectly from the sale, use, installation or failure of any product acquired by buyer from Pico Macom. This limited warranty
extends to the original purchaser. Pico Macom reserves the right to modify or discontinue this warranty at Pico Macom’s sole discretion
without notification. No other warrantees are expressed or implied.
Damage or Shortage Claims
Our shipping staff carefully packs and ships your orders in compliance with common carriers’ requirements. Please make note of any
obvious damage or shortage on the freight bill or carrier’s receipt next to your signature. The carrier’s agent must too sign acknowledging
the loss. Failure to do so may result in the carrier’s refusal to honor the claim. Please open your order immediately upon receipt to check
for concealed damage and compare the packing list to the items shipped. If damaged, keep the original shipping cartons for possible
inspection by the carrier. You must report claims for loss or damage within 3 days of delivery, while claims for erroneous charges or price
corrections must be presented within 30 days of invoice date.
Returning Shipped Items
To return any shipped items, including those shipped for warranty repairs or credit, call our Customer Service desk to request a Return
Merchandise Authorization (RMA) number. Please reference the original invoice number and purchase date, and product serial number
(if any). Be certain to mark the RMA number on the package boldly and legibly. Unless we specify a different carrier, please ship your
returned items to us via UPS freight prepaid and fully insured. If returned for credit, we will promptly process your request upon receipt
of your return order.
Our Return Policy: Your Satisfaction Guaranteed
Our goal is your complete satisfaction. If for any reason, our products were not quite what you anticipated, simply call your customer
service rep and we will be happy to assist you in replacing or returning the order. You may return current, non-discontinued items for
full credit for up to 30 days from invoice date. Our requirements are simple: Excepting defective items, the products must be returned
in their original packaging and in re-salable condition. Restocking fees may otherwise apply beyond this period or if products are not
returned in their original condition. Please contact your customer service rep for more information.
*One-year warranty if sold outside U.S.A.
Pico Macom, Inc.
6260 Sequence Drive
San Diego, CA 92121

MOR-LCD4
8
Rev. 07/08
Ph: 800-421-6511 www.picomacom.com