Piera Systems Canaree I1E User manual

Canāree I1E
QUICK START GUIDE
Copyright © 2021 Piera Systems Inc. All rights reserved.
Made in Korea

Air Inlet Air Outlet
USB-Micro
Connector
(5V Power, COM)
Serial Number Label
Power LED
Ethernet LED
(inside)
Factory Omni
Antenna (+4dbM)
10/100 Ethenet Port
(PoE+ 48V @ 2W max)
RP-SMA Antenna
Connector
Do not obstruct the air inlet and outlet during operation.
Do not operate in a heavily contaminated environment.
This product should not be considered as a replacement for existing smoke alarms.

STEP 1
2
Once installed and running SenseiAQ software
detects your sensor locally (USB) navigate to the
settings tab to configure the Wifi network settings.
Register and Login to your Piera account from the
Accounts tab. Click Register Device to associate
this device with your account.
Once registered your data can be viewed remotely
on our cloud at https://sensei.pierasystems.com
STEP 2
Data from the sensor will be displayed in
the SenseiAQ Application when USB
Connected or connected to the Internet
and registered to your account.
Connect the Canāree sensor directly to a PC running
Windows 10 or MacOS (10.15 or above) using an
available USB Port and a standard Micro-USB data
cable The sensor will power-up via USB
Download the latest SenseiAQ software at
https://github.com/PieraSystems/SenseiAQ
Congratulations!
You are now in possession of the world’s most accurate and responsive particulate sensor.
Next Steps:
oInstall the device in its permanent location and begin monitoring your air quality in real-time.
oIncense or Matches can be used to create PM pollution to test responsiveness
oThe full Datasheets, Installation Guide for Canāree I1E Series and a User Guide for SenseiAQ
is available at pierasystems.com/support
oFor information on third-party integrations contact us at [email protected].
oMore resources at www.pierasystems.com.