Pillar 0179587 User manual

Plantation Shutters
INSTALLATION GUIDE
CONTENTS
4 Lengths of frame - Top/Bottom/Left/Right
2 Panels - Left/Right with pre-fit hinges
12 Lengths of Packing Strips
Hardware and Components
- 4 Lengths of 5.0mm thick Packing
- 8 Lengths of 2.5mm thick Packing
H
BEFORE INSTALLATION ALWAYS DOUBLE-CHECK MEASUREMENTS AND
ENSURE THERE IS NO OBSTRUCTION FROM WINDOW HARDWARE OR SILLS
STEP 1
Identify Top/Bottom/Left/Right Frame lengths, lay face
down on a soft flat surface. Use Hoffman Key and
mallet, wedge into place forming strong corners
T
B
R
L
FACE DOWN
STEP 3A
RECESS MOUNT - If the recess opening is slightly larger
than the frame, 2.5mm and/or 5mm packing pieces
can be used to fill up to 20mm in total width & height.
Once the matching packing pieces form a secure fit
into the recess, ensure frame is square and fit into
place using screws provided. Pre-drill as required.
- Hinges & Magnetic Latches are
pre-fitted to both the Frame and Panel
STEP 2A
RECESS MOUNT - Align constructed frame with window
and insert into opening. Ensure frame is square and fit
into place using screws provided. Pre-drill as required.
<20mm
<20mm
SHUTTERS ARE FOR INTERNAL USE ONLY

Plantation Shutters
INSTALLATION GUIDE
STEP 2B
FACE MOUNT - Align constructed frame with window
architrave. NOTE: Not all architraves are square, please
check before installation.
PREFERRED
INSTALLATION
METHOD IF
WINDOW
HARDWARE OR
SILLS MAY
CREATE
OBSTRUCTIONS
STEP 3B
FACE MOUNT - Ensure frame is square and fit into place
using screws provided all way around the frame.
Pre-drill as required.
STEP 4
Hinges are pre-fitted and panels can simply be lifted into
place before dropping in hinge pin. A slight tap using a
hammer may be needed. Adjust hinge if required.
Once Frame is securely fitted to the window, the Panels
can be installed one-by-one. The same process is used
for both Recess and Face Mount applications.
OPERATION
Periodic dusting is recommended to reduce build up of dust or debris.
Stubborn marks can be cleaned using a soft cloth warm water, mild detergent
MAINTENANCE
OVERLAP
MAGNETS
LEFT PANEL RIGHT PANEL
FRAME FRAME
TILT BARTILT BAR