Pioneer MVH-X690BS User manual
DIGITAL MEDIA RECEIVER
Р,опеег
Made for
i iPod D iPhone
PANDOR�
фspoti®
READY
О Bluetooth®
Owner's Manual
� lmportant (Serial number)
ITable
of
Contents
Before
You
Start....................................................................................... 2
Getting Started........................................................................................ 3
Radio.............•............................................................................................ 6
USB/iPod/
AUX
.......................................................................................... 6
Bluetooth.................................................................................................. 8
App
Mode
.................................•.....•....................................................... 10
Pandora® .................................................................................................
11
Spotify® ................................................................................................... 12
SiriusXM Satellite Radio....................................................................... 13
Using Pioneer
ARC
APP
........................................................................ 14
Audio adjustments ...............................................................................
15
Settings.................................•.•.•............................................................. 16
FUNCTION settings ........•..................................................................... 16
AUDIO settings...................................................................................... 18
SYSTEM
settings ................................................................................... 19
ILLUMINATION settings....................................................................... 20
MIXTRAX settings................................................................................. 20
Connections/Installation.....................................................................
21
Additional
Information
........................................................................ 24
About
this
manual:
• In
the
following
instructions, a
USB
memory
or
USB
audio player are referred
to
as
"USB
device':
• In this manual, iPod and iPhone are referred
to
as
"iPod':
2
En
IBeforeYou
Start
Thank you
for
purchasing
this
PIONEER
product
To
ensure proper
use,
please read
through
this manual before using this product.
It
is
especially
important
that
you read and observe WARNINGs and CAUTIONs in this manual.
Please
keep the
manual in a
safe
and accessible place for future reference.
FCC
10:
AJDK071
MODEL
NO.:
MVH-X690BS/MVH-X691
BS
IC:
775E-K071
This device complies with Part
15
of
FCC
Rules
and Industry
Canada
licence-exempt
RSS
standard(s).
Operation
is
subject
to
the
following
two
conditions:
(1)
this device may
not
cause interference, and
(2)
this device must accept any interference, including interference
that
may cause undesired
operation
of
this device.
This
transmitter must
not
be co-located
or
operated in conjunction
with
any other antenna or
transmitter.
The
Bluetooth antenna cannot be removed (or replaced) by
user.
This
equipment complies
with
FCC/IC
radiation exposure limits set forth for
an
uncontrolled
environment and meets the
FCC
radio frequency
(RF)
Exposure Guidelines and
RSS-1
02
of
the
IC
radio frequency
(RF)
Exposure rules. This
equipment
has
very
low
levels
of
RF
energy
that
it
deemed
to
comply
without
maximum permissive exposure evaluation
(MPE).
But
it
is
desirable
that
it
should
be installed and operated keeping the radiator at least 20cm or more away from person's body
(excluding extremities: hands, wrists, feet and ankles).
Alteration or modifications carried
out
without
appropriate authorization may invalidate the user's
right
to
operate the equipment.
Note
This equipment
has
been tested and found
to
comply
with
the limits for a
Class
Bdigital device,
pursuant
to
Part
15
of
the
FCC
Rules.
These limits are designed
to
provide reasonable protection
against harmful interference in aresidential installation.
This
equipment generates,
uses
and
can
radiate radio frequency energy and,
if
not
installed and used in accordance
with
the
instructions,
may cause harmful interference
to
radio communications. However, there
is
no
guarantee
that
interference will
not
occur in a particular installation.
If
this equipment does cause harmful
interference
to
radio ortelevision reception, which can be determined by turning
the
equipment
off
and on, the user
is
encouraged
to
try
to
correct
the
interference by one
or
more
of
the
following
measures:
-Reorient or relocate the receiving antenna.
-Increase
the
separation between
the
equipment
and receiver.
-Connect the equipment
into
an
outlet
on a circuit differentfrom
that
to
which
the
receiver
is
connected.
-Consult the dealer or
an
experienced radio/TV technician for help.
The Safety
of
Your
Ears
is
in Your Hands
Get the most
out
of
your
equipment
by playing
it
at a
safe
level-a
level
that
lets the sound come
through clearly
without
annoying blaring or distortion and, most importantly,
without
affecting your
sensitive hearing. Sound
can
be deceiving.
ESTABLISH А SAFE LEVEL:
ВЕ SURE ТО OBSERVE ТНЕ FOLLOWING GUIDELINES:
AwдRNING
• Do not attempt to install or service this product Ьу yourself. lnstallation or servicing of this
product Ьу persons without training and experience in electronic equipment and automotive
accessories may Ье dangerous and could expose you to the risk of electric shock, injury or other
hazards.
А
After-sales service for Pioneer products
1 Getting Started
MVH-X690BS/X691 BS
Remote Control
Frequently used operations
The availaЫe buttons vary depending on the unit.
En 3
Turn on the power*
Press
SRC/OFF
to
turn on
the power.
Press
SRC
to
turn on
the
power.
Adjust the volume
Select a source
Change the display
information
Return
to
the
previous
display/list
Press
and hold
SRC/OFF
to
turn
off
the
power.
Turn the
M.C.
dial.
Press
SRC/OFF
repeatedly.
Press
DISP repeatedly.
Press
BAND/!:::) .
Press
and hold
SRC
to
turn
off
the
power.
Press
VOLUME+
or-.
Press
MUTE
to
mute
the
unit.
Press
again
to
unmute.
Press
SRC
repeatedly.
Press
DISP repeatedly.
Press
....._/...,_
to
select
the
next/previous folder.
Return
to
the
normal display
Press
and hold
BAND/!:::>
.
from the menu
Answering a call
Press~.
Press
C..
Ending a call
Press~.
* When this unit's blue/white lead
is
connected
to
the
vehicle's auto-antenna relay control terminal,
the
vehicle's antenna extends when this unit's source
is
turned on.
To
retract
the
antenna, turn
the
source off.
Display indication
0
4En
Appears when a lower tier
of
the
menu or folder exists.
Appears when a Bluetooth telephone
is
connected
to
this
unit
by
HFP
(Hands
Free
Profile) (page
8)
and flashes while
the
telephone
is
on hold.
Appears when a Bluetooth audio player
is
connected
to
this
unit
by
A2DP
(Advanced Audio Distribution Profile) (page
8).
rs
when
the~
b
ssed.
Appears when the sound retriever function
is
set (page
17).
Appears when random/shuffle play
is
set (except when
BT
AUDIO
is
selected
as
the source).
Appears when repeat play
is
set (except when
BT
AUDIO
is
selected
as
the
source).
Appears when
the
iPod control function
is
set (page
7).
Appears when a Bluetooth connection
is
made (page
8).
The microprocessor
must
be reset in
the
following
situations:
-Before using this
unit
for
the
first
time
after
installation
-
If
the
unit
fails
to
operate
properly
-When strange
or
incorrect messages
appear
on
the
display
1 Press
the
RESET
button
with
a
pen
tip
or
other
pointed
instrument.
Remove
the
insulation sheet before use.
A
wARNING
How to replace the battery
CD
Insert the
CR2025
(3
V)
battery with the plus(+) and
minus(-)
poles orientated properly.
• Do
not
ingest the battery, Chemical Burn Hazard
(The remote control supplied with) This product contains a
coin/button
cell battery.
If
the
coin/
button
cell battery
is
swallowed,
it
can cause severe internal burns in
just
2 hours and can lead
to
death.
А
1
2
3
1
2
3
4
1
2
3
4
En 5
REAR-SP
[FUL]
[SW]
SYSTEM
UPDATE
[SYSTEM
INFO],
[S/
W
UPDATE]
SXM
RESET
[YES],
[CANCEL]
SYSTEM
RESET
[YES],
[CANCEL]
I
Radio
Select when there
is
afull-range speaker connected
to
the rear
speaker
output
leads.
Select when there
is
a subwoofer connected directly
to
the rear
speaker
output
leads
without
any auxiliary amplifier.
Select
[SYSTEM
INFO]
to
confirm the latest system information
on the unit.
Select [S/W
UPDATE]
to
update the unit
to
the latest software
and initialize the
unit
settings.
For
details on the latest software
and updating, visit our website.
Select
to
initialize the SiriusXM settings.
Select
[YES]
to
initialize the
unit
settings. The
unit
will be
restarted automatically.
(Some
of
the settings may be retained even after resetting the
unit.)
The
tuner
frequencies on this
unit
are allocated
for
use in
North
America.
Use
in
other
areas may result in
poor
reception.
1
Press
SRC/OFF
to
select [RADIO].
2
Press
BAND/!:>
to
select
the
band
from
[FM1], [FM2], [FM3]
or
[AM].
3
Press
a
number
button
(1/
A
to
6/~).
NOTE
You
can select a preset channel
by
pressing
~
and
turning
the
M.C.
dial.
TIP
The~/
......
buttons
can be also used
to
select a preset station
when
[SEEK]
is
set
to
[PCH]
in
the
FUNCTION settings (page
16).
The six strongest stations are stored
on
the
number
buttons
(11
A
to
6/~
).
6En
1 After selecting
the
band, press
the
M.C. dial
to
display
the
main menu.
2
Turn
the
M.C. dial
to
select [FUNCTION],
then
press
to
confirm.
3
Turn
the
M.C. dial
to
select [BSM],
then
press
to
confirm.
To
seeka
station
manually
1 After selecting
the
band,
press~/....._
to
select a station.
Press
and
hold
~I....._
then
release
to
seek an available station. Scanning stops
when
the
unit
receives a station.
To
cancel seek
tuning,
press~/
.......
NOTE
[SEEK]
needs
to
be set
to
[MAN] in
the
FUNCTION settings (page 16).
To
store stations
manually
1 While receiving
the
station you
want
to
store, press and
hold
one
of
the
number
buttons
(1/
A
to
6/~}
until
it
stops flashing.
NOTE
You
can select a preset channel
by
pressing
~
and
turning
the
M.C.
dial. After selecting a channel,
press and
hold
the
M.C. dial
to
store a station.
I
USB/iPod/
AUX
Disconnect headphones
from
the
device before
connecting
it
to
the
unit.
USB
devices
(including
Android™)/iPod
1 Open
the
USB
port
cover.
2 Plug
in
the
USB
device/iPod using an
appropriate
cable.
NOTE
To
automatically switch
to
[USB]
source
when
a
USB
device/iPod
is
connected
to
the
unit, set
[USB
AUTO]
to
(ON] in
the
SYSTEM
settings (page 20).
A
CAUTION
Use
an
optional
Pioneer
USB
cable
(CD-USOE)
to
connect
the
USB
device
as
any device connected
directly
to
the
unit
will
protrude
out
from
the
unit,
which could be dangerous.
Before removing
the
device, stop playback.
AOA connections
For details
on
AOA
connection,
see
page
15.
MTP
connection
A device installed
with
Android
OS
4.0 or later can be connected
to
the
unit
via
MTP,
using
the
cable
supplied
with
the
device. However,
depending
on
the
connected device and
the
numbers
of
the
files in
the
device,
audio
files/songs may
not
be able
to
be played back via
MTP.
Note
that
MTP
connection
is
not
compatible
with
WAV
file formats and
FLAC
file formats, and cannot be used
with
the
MIXTRAX
function.
NOTE
If
you use an
MTP
connection, [ANDROID
WIRED]
needs
to
be set
to
[MEMORY] in
the
SYSTEM
settings
(page 20).
AUX
1
Insert
the
stereo mini plug into
the
AUX
input
jack.
2
Press
SRC/OFF
to
select [AUX]
as
the
source.
NOTE
If
[AUX]
is
set
to
[OFF]
in
the
SYSTEM
settings, [AUX] cannot be selected
as
a source (page
19).
You
can make various adjustments in
the
FUNCTION settings (page 16).
Note
that
the
following
operations
do
not
work
for
an
AUX
device.
To
operate
an
AUX
device, use
the
device itself.
Search
for afile from a list 1
Press
0..
to
display the list.
2 Turn the M.C. dial
to
select the desired
file (folder) name or category, then
press
to
confirm.
3
Turn the M.C. dial
to
select the desired
file, then press
to
confirm.
Playback starts.
View a list
of
the files in the selected folder/
Press
the
M.C.
dial when afolder/category
category*l
is
selected.
Play
a song in the selected folder/
Press
and hold the M.C. dial when afolder/
category*l category
is
selected.
Alphabetical search (iPod only)
Press
0..
to
display the list.
2
Turn the
M.C.
dial
to
select the desired
category list, then
press
0..
to
enter the
alphabetical search mode.
(Turning the M.C. dial twice also enters
the alphabetical search mode.)
3 Turn the
M.C.
dial
to
select a letter, then
press
to
display the alphabetical list.
To
cancel alphabetical search,
press
BAND/
~-
Press
6
Press
5/~
.
Press
and hold
5/~.
Press
4/PAUSE.
Press
and hold
0...
*1
Compressed audio files
only
*2 When you use the fast forward or reverse
function
while playing a
VBR
file,
the
playback
time
may
be
not
correct.
Link play mode
You
can access songs based on
the
artist, album, or genre currently playing.
1
While listening
to
a song, press and hold
0..
to
enter
the
link play mode.
2 Turn
the
M.C. dial
to
select
the
mode
([ARTIST], [ALBUM], [GENRE]), then press
to
confirm.
The selected song/album will be played after
the
currently playing song.
NOTE
The selected
song/album
may be canceled
if
you use functions
other
than those from
the
link
play
mode
(e.g. fast forward and reverse).
iPod control
You
can control the
unit
via a connected iPod.
The
following
iPod models are
not
compatible
with
this function.
-iPod nano 1st generation, iPod
with
video
1
Press
BAND/!:>
during playback, then select
the
control mode.
[CONTROL iPod]: The unit's iPod
function
can be operated from
the
connected iPod.
En
7
-
m
:I
~
iii"
::r
[CONTROL
AUDIO]:
The unit's iPod
function
can only be operated by
the
buttons
on
the
unit
or
supplied remote control. In this mode,
the
connected iPod
cannot
be
turned
on
or
off.
NOTES
• Switching
the
control mode
to
[CONTROL
iPod] pauses song playback.
Use
the connected iPod
to
resume playback.
• The following operations are still accessible from
the
unit, even
if
the control mode
is
set
to
[CONTROL
iPod].
-
Pause,
fast forward/reverse, song/chapter selection
• The volume can only be adjusted
from
the
unit.
The MIXTRAX function creates a
non-stop
mix
of
your music library, accompanied by
illumination effects. For details on MIXTRAX settings,
see
page
20.
NOTES
• This function
is
not
compatible
with
an
Android device connected via
MTP.
• Depending on the file/song, sound effects may
not
be available.
• Turn the
MIXTRAX
function
off
if
the
illumination effects
it
produces interfere
with
driving.
1 Press
3/MIX
to
turn
MIXTRAX
on/off.
I
Bluetooth
c!r
Important
Ifthree or more Bluetooth devices
(e.g.
a phone and separate audio player) are connected, they may
not
work
properly.
1 Turn
on
the
Bluetooth
function
of
the
device.
2 Press
~
to
display
the
phone
menu.
3 Turn
the
M.C.
dial
to
select [BT SETTING],
then
press
to
confirm.
4
Turn
the
M.C.
dial
to
select [ADD DEVICE],
then
press
to
confirm.
The
unit
starts
to
search
for
available devices,
then
displays
them
in
the
device list.
•
To
cancel searching, press
the
M.C.
dial.
•
If
the desired device
is
not
in
the
list, select
[RE-SEARCH].
•
If
there
is
no device available, [NOT FOUND] appears in
the
display.
S
Turn
the
M.C.
dial
to
select a
device
from
the
device list,
then
press
to
confirm.
Press
and hold the M.C. dial
to
switch
the
displayed device
information
between
the
Bluetooth device address and device name.
6 Select [Pioneer
BT
Unit]
shown
in
the
device display.
7 Make sure
the
same
6-digit
number
appears
on
this
unit
and
the
device,
then
select uves"
on
the
device.
NOTES
•
[DEVICE
FULL]
appears
if
the
unit
has
already been paired
with
three
other
devices.
In
this
case,
delete
one
of
the paired devices.
See
[DEL
DEVICE]
or
[GUEST
MODE] in
the
Bluetooth settings (page
8).
• Depending on the device,
the
PIN
code
is
required in step ?.In this
case,
input
[0000].
TIP
The Bluetooth connection can be also made by detecting the
unit
from the Bluetooth device.
To
do
so,
[VISIBLE]
in
the
Bluetooth settings needs
to
be set
to
[ON].
For
details on a Bluetooth device operations,
refer
to
the operating instructions supplied
with
the Bluetooth device.
Bluetooth
settings
DEVICELIST
DEL DEVICE
[DELETE
YES],
[DELETE
NO]
ADD
DEVICE
A.CONN
[ON],
[OFF]
VISIBLE
[ON],
[OFF]
PIN CODE
DEV.INFO
Display the list
of
paired Bluetooth devices."*" appears on the
device name when the Bluetooth connection
is
established.
Delete the device information.
Register a new device.
Select [ON] to connect
to
aBluetooth device automatically.
Select [ON]
so
that
a Bluetooth device
can
detect the unit when
the
unit
is
connected via Bluetooth
to
another device.
Change the
PIN
code.
1
Press
the M.C. dial to display the setting mode.
2 Turn the M.C. dial
to
select anumber.
3
Press
the M.C. dial to move the cursor to the next position.
4 After
inputting
the
PIN
code,
press
and hold the M.C. dial.
After inputting the
PIN
code, pressing the
M.C.
dial returns you
to
the
PIN
code input display, and you
can
change the
PIN
code.
Switch the device information on the display between the
device name and Bluetooth device address.
Menu
Item
GUEST
MODE
[ON],
[OFF]
A.PAIRING
[ON],
[OFF]
Description
Select [ON]
to
move
to
the
[DEL
DEVICE]
screen automatically
when the
unit
has
already been paired
with
three devices.
Select
[ON]
to
pair the
unit
and iPhone automatically when
an
iPhone
is
connected
to
the
unit
via
USB.
(This function may
not
be
available depending on the version
of
iOS
you are using.)
~l
.
tl
.
~
.
*~pt
.
h
·.•
t~
.
le
.
p
·
h
·
~l'le
First, make a Bluetooth
connection
with
the
Bluetooth
telephone
(page 8). Up
to
two
Bluetooth telephones can be connected simultaneously.
c!}
Important
• Leaving
the
unit
on standby to connect
to
your phone
via
Bluetooth while the engine
is
not
running
can
drain the vehicle's battery.
•
Be
sure
to
park your vehicle in a
safe
place and apply the parking brake before operation.
To
make
a
phone
call
1
Press
~
to
display
the
phone
menu.
When
two
phones are connected, a
phone
name appears first
then
a
phone
menu
will display.
To
switch
to
another
phone, press
~
again.
2
Turn
the
M.C. dial
to
select
[RECENTS]
or
[PHONE BOOK],
then
press
to
confirm.
If
you select [PHONE BOOK], proceed
to
step
4.
3 Turn
the
M.C. dial
to
select [MISSED], [DIALED]
or
[RECEIVED],
then
press
to
confirm.
4 Turn
the
M.C. dial
to
select a name
or
phone
number,
then
press
to
confirm.
The
phone
call starts.
To
answeran
incoming
call
1
Press~
when
a call
is
received.
TIP
When
two
phones are connected
to
the
unit
via Bluetooth and there
is
an incoming call while one
phone
is
being used for a call, a message will appear in the display.
To
answer that incoming call, you
need
to
end
the
existing call.
Basic
operations
Switch between the current caller
Press
the M.C. dial.
and a caller on hold
Press
and
hold~.
Adjust the volume
of
the caller's Turn the
M.C.
dial during the call.
voice (When private mode
is
on,
this function
is
not
available.)
Turn the private mode on or
To
preset
phone
numbers
1
Select a
phone
number
from
a
phone
book
or
call history.
2
Press
and
hold
one
of
the
number
buttons
{1/A
to
6/~).
The
contact
is
stored in
the
selected preset number.
To
make a call using a preset number, press one
of
the
number
buttons
(1/
A
to
6/~),
then
press
the
M.C.
dial.
Voice
recognition
{Only
for
iPhone)
This
function
is
only
available
when
an iPhone
equipped
with
voice recognition
is
connected
to
the
unit
via Bluetooth.
1
Press and
hold
~
to
activate
the
voice recognition mode.
2
Press
the
M.C. dial and
then
talk
into
the
microphone
to
input
voice commands.
To
exit
the
voice recognition mode, press
BAND/=::>.
NOTE
For
details on the voice recognition features, refer
to
the manual supplied
with
your iPhone.
Phone
menu
[DIALED]
[RECEIVED]
PHONE BOOK*l Display the contacts which have been transferred from your
phone.
Set
[VISIBLE]
in the Bluetooth settings
to
[ON]
to
browse
the contacts
via
this unit.
En
9
PRESET
1-6
A.ANSR*2
[ON],
[OFF]
R.TONE
[ON],
[OFF]
PB
INVT
PBA.SVNC
[ON],
[OFF]
BTSETTING
Recall
the preset phone numbers.
You
can also recall the preset
phone numbers by pressing one
of
the number buttons
(11
A
to6/~).
Select [ON]
to
answer
an
incoming call automatically.
Select [ON]
if
the ring tone does
not
come
out
from the car
speakers. Depending on the connected phone, this function
may
not
work.
Invert the order
of
names in the phone book (name view).
Select whether or
not
to
transfer the contacts from your phone
automatically when your phone
is
connected
to
the unit.
• When connected for the first time, the contacts from your
phone are transferred automatically, regardless
of
the
[PB
A.SYNC]
setting.
• Ifyou switch from
[ON]
to
[OFF],
the auto synchronization will
not
be performed on the next connection.
• Ifyou switch from
[OFF]
to
[ON], the auto synchronization will
be performed when your phone
is
connected
to
the unit.
• During the auto synchronization, you cannot cancel the
synchronization, even
if
you select
[OFF].
You
can adjust various settings for Bluetooth connections.
For
details on Bluetooth settings,
see
page
8.
*1
The contacts
on
your
phone
will
normally
be transferred
automatically
when
the
phone
is
connected.
If
they
are not, use
your
phone
to
transfer
the
contacts.
*2
If
two
phones are connected, this
function
does
not
work
on
incoming
calls
that
are received
while
one
of
the
phones
is
being
used for a call.
c!>-
Important
•
Depending
on
the
Bluetooth
audio
player
connected
to
this unit,
the
available operations will
be
limited
to
the
following
two
levels:
-A2DP (Advanced
Audio
Distribution
Profile) can
only
play back songs
on
your
audio
player.
-
AVRCP
(AudioNideo
Remote Control Profile) can
perform
functions
such
as
playback, pause, select
song, etc.
• The sound
of
the
Bluetooth
audio
player
will
be
muted
when
the
phone
is
in use.
• When
the
Bluetooth
audio
player
is
in use,
you
cannot
connect
to
a
Bluetooth
telephone
automatically.
•
Depending
on
the
type
of
Bluetooth
audio
player
you
have
connected
to
this unit,
operation
and
information
displayed may
vary
based
on
availability and
functionality.
1
Make
a Bluetooth connection
with
the
Bluetooth
audio
player.
10
En
2
Press
SRC/OFF
to
select [BT AUDIO]
as
the
source.
3
Press
BAND/!:>
to
start playback.
Basic operations
You
can make various adjustments in
the
FUNCTION settings (page 16).
Fast
forward or reverse
Select atrack
Repeat play*
Random play*
Pause/resume playback
Search
for afile from a list
Press
and hold ....._ or
~.
Press....._
or.....-.
Press
6/~.
Press
5/~.
Press
4/PAUSE.
1
Press
0..
to
display a list.
2 Turn the
M.C.
dial
to
select the desired
folder name, then press
to
confirm.
3 Turn the
M.C.
dial
to
select
the
desired
I
file, then press
to
confirm.
. Playback starts.
*
Depending
on
the
connected
device, these operations may
not
be available.
I
AppMode
You
can
enjoy
listening
to
an
application
on an iPhone/Android device via
the
unit. In
some
cases,
you can
control
an
application
by using
the
unit.
For details on
compatible
devices, visit
our
website.
~Important
Use
of
third
party
apps may
involve
or
require
the
provision
of
personally
identifiable
information,
whether
through
the
creation
of
a user
account
or
otherwise, and for certain applications,
the
provision
of
geolocation
data.
ALL
THIRD
PARTY
APPS
ARE
THE
SOLE
RESPONSIBILITY
OF
THE
PROVIDERS,
INCLUDING WITHOUT
LIMITATION COLLECTION AND
SECURITY
OF
USER
DATA
AND
PRIVACY
PRACTICES.
BY
ACCESSING
THIRD
PARTY
APPS,
YOU
AGREE
TO
REVIEW
THE
TERMS
OF
SERVICE
AND
PRIVACY
POLICIES
OF
THE
PROVIDERS.
IF
YOU
DO NOT
AGREE
WITH
THE
TERMS
OR
POLICIES
OF
ANY
PROVIDER
OR
DO NOT
CONSENT
TO
THE
USE
OF
GEOLOCATION
DATA
WHERE
APPLICABLE,
DO
NOT
USE
THAT THIRD
PARTY
APP.
For'iPhone users
This
function
is
compatible
with
iPhones and iPod touches installed
with
iOS
5.0
or
later.
For Android device users
NОТЕ
yi�
S
6
Basic operations
1 Pandora®
3
4
S
6
Basic operations
m
;·
[АВС]:
S
М.С. М.С.
Basic operations
·•
Ье
NОТЕ
1 SiriusXM Satellite Radio
®
Replay™
TuneStart™
NОТЕ
TuneScan™
NОТЕ
TuneMix™
NОТЕ
™
NОТЕ
Pressing and
holding
either
button
will rapidly browse
through
the
channels.
Press
and hold either
button
then
release
to
tune
automatically. Scanning stops
when
the
unit
receives a channel.
To
cancel seek tuning, press
~/....,...
Basic operations
1 Press and
hold
DISP
to
select
the
operation
mode
[CHANNEL]
or
[REPLAY].
NOTE
You
can exit
the
replay mode by pressing and
holding
BAND/=::l.
Select achannel
Skip backward/forward
Fast
forward
or
reverse
NOTE
1
Set
the operation mode to
[CHANNEL].
2
Press~
or ........
Pressing and holding either
button
will
rapidly browse through the channels.
1
Set
the operation mode
to
[REPLAY].
2
Press~
or ........
Set
the operation mode
to
[REPLAY].
2
Press
and hold
~
or ....,..
.
You
can also make various adjustments in the SiriusXM settings (page
17)
.
Categoryscan
The live broadcast for each channel in
the
current
category plays for six seconds at a
time. Follow
the
instructions below.
To
search
for
a channel
from
a list
1 Press
0..
during
playback.
2
Turn
the
M.C.
dial
to
select a category.
3 Select
one
of
the
operations
below.
Category scan:
Press
and
hold
the
M.C. dial
to
switch
to
category
scan.
Channel search:
Press
the
M.C. dial
to
stop
a scan.
NOTE
Press
DISP
to
change
the
display
information
between "Channel Name'; "Artist Name'; "Song Title';
"Content Info" and "Channel Number".
Scan
options
14En
Switching to the next/previous song during
TuneScan
Switching
to
the next/previous channel
during the category
scan
Aborting a
scan
(The last channel or song
will continue
to
play when
scan
ends.)
To
preset
a channel
Press~
or ........
Press
BAND/=::l.
1
While
receiving a
channel
you
want
to
store, press
and
hold
one
of
the
number
buttons
(1/
A
to
6/~)
until
it
stops
flashing.
To
play
the
stored channels, select
the
band and
then
press a
number
button
(11
A
to
6/~).
To
preset
a channel from a list
1
While
receiving a
channel
you
want
to
store, press
0...
2
Turn
the
M.C.
dial
to
select
[PRESETS],
then
press
to
confirm.
3
Turn
the
M.C.
dial
to
select a preset channel.
4 Press
and
hold
the
M.C.
dial
to
store.
To
receive
the
stored channels,
turn
the
M.C.
dial
to
select a preset channel,
then
press
to
confirm.
Parental Control
Some SiriusXM channels contain mature content.
You
can lock these channels. For
details,
see
[PARENTAL
CTRL]
in SiriusXM settings (page
18).
IUsing
Pioneer
ARC
APP
You
can operate
the
unit
from Pioneer
ARC
APP
installed on an iPhone/Android device.
In some
cases,
you can control aspects
of
the
application, such
as
source selection,
pause, etc., by using
the
unit.
For details on
what
operations are available
on
the
application,
see
the
application's
help
section.
A wARNING
Do
not
attempt
to
operate the application while driving. Make sure
to
pull
off
the
road and park your
vehicle in a
safe
location before
attempting
to
use
the controls on
the
application.
For
iPhone
users
This
function
is
compatible
with
iPhones (iPhone 5
or
later) and iPod touches (5th and
6th generation) installed
with
iOS
8.0
or
later.
You
can
download
Pioneer
ARC
APP
on iTunes
App
Store.
For
Android
device
users
This
function
is
compatible
with
devices
that
have Android
OS
4.1
or
later installed and
also
support
AOA (Android Open Accessory) 2.0.
You
can
download
Pioneer
ARC
APP
on Google
Play.
NOTE
Some Android devices connected via
AOA
2.0 may
not
work properly or
emit
sounds due
to
their
own
software design, regardless
of
the
OS
version.
1 Connect this unit
with
the
mobile device.
• iPhone/Android device via
USB
(page
6)
• iPhone/Android device via Bluetooth (page
8)
2
Press
the
M.C.
dial
to
display
the
main
menu.
3 Turn
the
M.C.
dial
to
select [SYSTEM],
then
press
to
confirm.
4 Turn
the
M.C.
dial
to
select [PHONE CONNECT],
then
press
to
confirm.
S Turn
the
M.C.
dial
to
select
one
of
the
below,
then
press
to
confirm.
• Select [IPHONE/IPOD] for iPhone.
• Select [ANDROID]
for
Android device.
6 Turn
the
M.C.
dial
to
select
one
of
the
below.
• Select
[WIRED]
for
the
USB
connection.
• Select
[BLUETOOTH]
for
the
Bluetooth connection.
Proceed
to
step 10
if
you select
the
USB
connection
for
iPhone
or
the
Bluetooth
connection.
NOTE
When the connection setting
is
changed, a message
that
lets you
know
that
the
connection
setting had been changed will appear in the display.
Press
the
M.C.
dial and
turn
the
M.C.
dial
to
select
[SRC
OFF
:YES],
then press
to
confirm. The
unit
turns
off
automatically and the setting
is
executed.
7 Repeat steps 2
to
3.
8 Turn
the
M.C. dial
to
select [ANDROID WIRED],
then
press
to
confirm.
9 Turn
the
M.C. dial
to
select
[APP
CONTROL] for an Android device connected via
USB.
If
[ON]
is
selected in
[P.APP
AUTO
ON] (page
20),
Pioneer
ARC
APP
on the Android
device starts automatically, and all
the
steps are finished.
NOTE
IfPioneer
ARC
APP
has
not
been installed on your Android device yet, amessage
that
prompts you
to
install
the
application will appear on your Android device. Select
[OFF]
in
[P.APP
AUTO
ON]
to
clear the message (page
20).
10
Press
SRC/OFF
to
select any source.
11
Launch Pioneer
ARC
APP
on
the
mobile
device.
NOTE
You
can also launch the application by pressing and
holding
the
M.C.
dial
if
you select the
USB
connection for iPhone orthe Bluetooth connection.
1
Press
SRC/OFF
to
select [ANDROID].
Basic operations
Select atrack
Press~
or
.......
Fast
forward or reverse
Press
and hold
~
or ....,...
Pause/resume playback
Press
4/PAUSE.
IAudio adjustments
You
can also make various adjustments in
the
AUDIO settings (page 18).
This
unit
features
two
operation modes:
network
mode
and standard mode.
You
can
switch between modes
as
desired (page
5).
En
15
Network
mode
You
can create a 2-way +
SW
multi-amp
and multi-speaker system
with
high range
speaker,
middle
range speaker and subwoofer for reproduction
of
high,
middle
and
low
frequencies (bands).
Standard
mode
You
can create a 4-speaker system
with
front
and rear speakers or
front
speakers and
subwoofers, or a6-speaker system
with
front
and rear speakers and subwoofers.
~~~~ijnJth~CUt·Offfnlcl,rlft<,JYaJuitandt~
.
sl()i)e
"Value
··
You
can adjust
the
cut-off
frequency value and
the
slope value
of
each speaker.
The
following
speakers can be adjusted.
Network
mode:
[HIGH] (high-range speaker
HPF),
[MID
HPF]
(middle-range speaker
HPF),
[MID
LPF]
(middle-range speaker
LPF),
[SUBWOOFER]
Standard
mode:
[FRONT],
[REAR],
[SUBWOOFER]
NOTE
[SUBWOOFER] can
only
be
selected
when
[ON]
is
selected in [SUBWOOFER] (page 18).
1 Press
the
M.C.
dial
to
display
the
main
menu.
2 Turn
the
M.C.
dial
to
select [AUDIO],
then
press
to
confirm.
3 Turn
the
M.C. dial
to
select
[CROSSOVER],
then
press
to
confirm.
4
Turn
the
M.C. dial
to
select
the
speaker
unit
(filter)
to
be adjusted,
then
press
to
confirm.
S
Turn
the
M.C.
dial
to
select [HPF]
or
[LPF] according
to
the
speaker
unit
(filter),
then
press
to
confirm.
6 Turn
the
M.C.
dial
to
select an
appropriate
cut-off
frequency
for
the
speaker
unit
(filter) selected in step 4,
then
press
to
confirm.
16
En
Network
mode:
[1.2SK]
to
[1
2.SK]
(ifyou choose [HIGH]
or
[MID
LPF])
[25]
to
[250] (ifyou choose [MID
HPF]
or
[SUBWOOFER])
Standard
mode:
[50HZ]
to
[200HZ]
7 Turn
the
M.C. dial
to
select an
appropriate
slope
for
the
speaker
unit
(filter)
selected in step
4.
Network
mode:
[-6]
to
[-24]
(ifyou choose [HIGH], [MID
HPF]
or [MID
LPF])
[-
12]
to
[-36]
(ifyou choose
[SUBWOOFER])
Standard
mode:
[-6]
to
[-24]
I
Settings
You
can adjust various settings in
the
main menu.
1 Press
the
M.C.
dial
to
display
the
main
menu.
2 Turn
the
M.C. dial
to
select
one
of
the
categories below,
then
press
to
confirm.
• FUNCTION settings (page 1
6)
• AUDIO settings (page 18)
•
SYSTEM
settings (page 1
9)
• ILLUMINATION settings (page 20)
• MIXTRAX settings (page 20)
3
Turn
the
M.C.
dial
to
select
the
options,
then
press
to
confirm.
The
menu
items vary according
to
the
source.
BSM
I QADfQ
LOCAL
I
..
~i?JO
•·
Store the
six
strongest stations on the number
buttons
(11
A
to
6/~)
automatically.
FM:
[OFF],
[LV1
],
[LV2],
[LV3],
[LV4]
Restrict the
tuning
station according
to
the
AM:
[OFF],
[LVl
],
[LV2]
signal strength.
Assign
~
or
~
buttons
to
seek the stations
one by one (manual tuning) or select a station
from the preset channels.
UN
SAVE
SEL
DEVICE
S.RTRV
[1] (effective for
low
compression
rates),
[2] (effective for high
compression rates),
[OFF]
AUDIO
BOOK
[FASTER],
[NORMAL],
[SLOWER]
BOOKMARK
IP~-1
NEW
STATION
IRBIIII
[FROM
TRACK],
[FROM
ARTISn
PAUSE
PLAY
Store
the
information
about
the
song currently
being played
to
your music list on Spotify.
Remove
the
song information stored in
[SAVE].
Connect a Bluetooth device in
the
list.
Enhance compressed audio and restore rich
sound.
Change the playback speed. (Not available when
[CONTROL
iPod]
is
selected in
the
control mode.)
Store
the
track information currently being
played in your Pandora account.
Create a new station based on
the
track orartist
currently being played.
Pause
or
resume playback.
Start playback.
Stop playback.
SiriusXM settings
PAUSE
OPERATE
MODE
[CHANNEL],
[REPLAY]
TUN
EM
IX
[ON],
[OFF]
TUNE
SCAN
TUNE
START
[ON],
[OFF]
Pause
or resume playback.
Assign
~or~
buttons
to
select a channel
or skip backward/skip forward.
Create a music channel that's a blend
of
songs
made up from
the
music channels stored on the
current band
of
presets.
Scan
through
songs from your music channel
presets.
Start playback
of
the
broadcast from the
beginning
of
a song when
tuning
to
a preset
music channel.
En
17
PARENTAL CTRL
[LOCKED
CH],
[CLEAR
ALL], [EDIT
CODE)
EQSETTING
[SUPER
BASS],
[POWERFUL],
[NATURAL], [VOCAL], [CUSTOM1),
[CUSTOM2], [FLAn
Select an equalizer band and
level
for
further
customizing.
Equalizer band:
[50HZ]
to
[12.5kHZ)
Equalizer level:
[-6)
to
[+6]
FADER*1 (Only
for
standard
mode)
BALANCE
18
En
Input
the
current
passcode
on
the
[PASSCODE)
screen (the
default
passcode
is
0000).
1 Turn
the
M.C. dial
to
select a number.
2
Press
the
M.C. dial
to
move
the
cursor
to
the
next
position.
3 After
inputting
the
passcode, press
the
M.C.
dial.
4
Turn
the
M.C. dial
to
select
one
of
the
following
menu
items,
then
press
to
confirm.
•
[LOCKED
CH):
Lock
the
current
channel,
which
contains mature content.
1
Press
the
M.C. dial
to
turn
the
lock
on
or
off.
•
[CLEAR
ALL): Unlock all
the
channels
that
have
restricted access.
1
Turn
the
M.C. dial
to
switch
to
[YES),
then
press
to
confirm.
• [EDIT
CODE):
Change
the
passcode.
1
Repeat steps 1
to
3
to
enter
a
new
passcode.
2 After
inputting
the
passcode, press
the
M.C.
dial.
The
new
passcode
is
saved.
Select
or
customize
the
equalizer curve.
• When you select a setting
other
than
[CUSTOM
1]
and [CUSTOM2), you can also
customize
the
equalizer curve
by
pressing and
holding
the
M.C.
dial,
then
store
the
customized equalizer curve in [CUSTOM
1).
Adjust
the
front
and rear speaker balance.
Adjust
the
left and
right
speaker balance.
SUBWOOFER
[ON),
[OFF)
SUBWOOFER*2
[NOR),
[REV]
SPEAKER LEVEL
Network mode: [HIGH
L],
[HIGH
R],
[MID
L),
[MID
R),
[SUBWOOFER)
Standard mode:
[FRONT
L],
[FRONT
R),
[REAR
L],
[REAR
R],
[SUBWOOFER]
Output level:
[-24]
to
[1
0]
CROSSOVER
POSITION
[OFF],
[FRONT
LEFT]
(front seat
left),
[FRONT
RIGHn (front seat
right), [FRONn
(front
seats), [ALL]*
*Only
for standard
mode
TIME
ALGNMNT
[INITIAL], [OFF], [CUSTOM)
Select a
type
of
speaker and
adjust
the
speaker distance
for
further
customizing in [CUSTOM).
Network mode:
[HIGH
L],
[HIGH
R],
[MID
L],
[MID
R],
[SUBWOOFER)
Standard mode:
[FRONT
L],
[FRONT
R),
[REAR
L),
[REAR
R],
[SUBWOOFER]
Speakerdistance (inch):
[140)
to
[0]
Set
to
[ON]
when
using a
subwoofer
speaker.
Select
the
subwoofer
phase.
Select a speaker
unit
(filter) and adjust
the
output
level.
•
Each
value you have adjusted changes
when
you change
the
[POSITION)
setting
(page 18).
Select a speaker
unit
(filter)
to
adjust
the
HPF
or
LPF
cut-off
frequency
and
the
slope
for
each
speaker unit.
For details
on
the
[CROSSOVER)
setting,
see
page
16.
Select a listening
position
to
adjust
the
speakers'
output
levels
automatically
and add a delay
time
that
corresponds
to
the
number
and locations
of
occupied seats.
Select
or
customize
the
time
alignment
settings
to
reflect
the
distance
between
the
listener's
position
and each speaker.
• Select [INITIAL]
to
initialize
the
setting value.
• Select
[OFF]
to
reset all setting values
to
0.
• The [CUSTOM] setting
is
available
when
[FRONT
LEFT]
or
[FRONT
RIGHT]
is
selected in
[POSITION] (page 18).
• The [CUSTOM] setting
is
not
available
when
[OFF]
is
selected in [SUBWOOFER] (page 1
8).
SAVE
SETTINGS
[YES],
[CANCEL]
LOAD
SETTINGS
BASS
BOOST
[0]
to
[+6]
LOUDNESS
[OFF], [LOW], [MID], [HI]
AUTO
LVCTRL
[OFF],
[MODEl],
[MODE2]
SLA
[+4]
to
[-4]
Save
to
later recall
the
following
sound settings
at
their
current
values:
[CROSSOVER],
[SPEAKER
LEVEL],
[EQ
SETTING], [POSITION], [TIME
ALGNMNT],
[BASS
BOOSn, [SUBWOOFER].
Load
the
sound settings,
when
you have already
performed
[SAVE
SETTINGS].
Select
the
bass
boost
level.
Compensate
for
clear sound at
low
volume.
Adjust
the
difference in
volume
levels
among
sources
or
audio
files automatically.
Adjust
the
volume
level for each source except
FM.
Each
of
the
below
combinations
are set
to
the
same setting automatically.
• When
making
a
USB
connection,
set
USB,
iPod,
PANDORA, ANDROID,
SPOTIFY,
and
APP.
• When
making
a
Bluetooth
connection,
set
BT
AUDIO, iPod, PANDORA, ANDROID,
SPOTIFY,
and
APP.
*1
Not
available
when
[SW]
is
selected in
[REAR-SP]
in
the
INITIAL settings (page 6).
*2
Not
available
when
[FUL]
is
selected in
[REAR-SP]
in
the
INITIAL settings (page
6)
.
You can also access
to
these
menus
when
the
unit
is
turned
off.
CLOCK
SET
Set
the
clock (page
5).
12H/24H
[12H], [24H] Select
the
time
notation.
BEEP
TONE
[ON],
[OFF]
INFO
DISPLAY
[SOURCE/BTINFO],
[SOURCE/
SPEANA], [CLOCK/BTINFO],
[CLOCK/SPEANA],
[LEVEL
METER],
[SPEANA], [OFF]
DOT
DISPLAY
[SPEANA], [ICON]
AUX
[ON], [OFF]
BTAUDIO
[ON], [OFF]
SPOTIFY
[ON], [OFF]
BTMEMCLEAR
[YES],
[CANCEL]
PHONE
CONNECT
[IPHONE/IPOD], [ANDROID]
A beep can be heard
when
any
button
is
pushed.
Select
[OFF]
to
disable this
function.
Display
the
item
on
the
sub
information
display.
• When [SOURCE/SPEANA]
or
[CLOCK/SPEANA]
is
selected, display
the
antenna instead
of
the
speana on
the
radio source.
Select [SPEANA]
or
[ICON]
to
appear
on
the
left
side
of
the
display.
Set
to
[ON]
when
using an auxiliary device
connected
to
the
unit.
Set
the
Bluetooth
signal
on/off.
Set
to
[ON]
when
using
the
Spotify
function.
Clear
the
Bluetooth
device data (device list,
PIN
code, call history,
phone
book, preset
phone
numbers) stored in
the
unit.
[CLEARED]
appears
when
data
is
successfully
deleted.
Select
the
type
of
device ([IPHONE/IPOD]
or
[ANDROID]) and
the
appropriate
connection
method
([WIRED]
or
[BLUETOOTH]) according
to
your
device.
• When [BLUETOOTH]
is
selected,
USB
connections
cannot
be
made
regardless
of
the
current
Bluetooth
connection
to
the
unit.
• Select [ANDROID]
when
you
connect
the
mobile
device
other
than
iPhone
or
Android.
• When
the
setting
is
changed,
[USB
AUTO]
(page 20)
is
automatically
performed
if
[USB
AUTO]
is
set
to
[ON].
En
19
ANDROID WIRED
[MEMORY],
[APP
CONTROL]
P.APP
AUTO
ON
[ON],
[OFF]
USB
AUTO
[ON],
[OFF]
COLOR
[KEY
COLOR],
[DISP
COLOR],
[BOTH
COLOR]
DIM
SETTING
20En
[SYNC
ILLUMI],
[SYNC
CLOCK],
[ON],
[OFF]
Select
the
appropriate
connection
method
for
an
Android
device.
• This setting
is
not
available
when
[BLUETOOTH]
is
selected in [PHONE CONNECT].
Select [ON]
to
automatically launch Pioneer
ARC
APP
when an Android device
is
connected
to
the
unit
via
AOA.
(Not available when
[MEMORY]
is
selected in [ANDROID
WIRED].)
Select [ON]
to
automatically switch
to
[USB]
source
when
a
USB
device/iPod
is
connected
to
the
unit.
Select
[OFF]
when
a
USB
device/iPod
is
being
connected
to
the
unit
just
for
charging.
Select color
for
the
keys/display
of
the
unit
from
12 preset colors,
[SCAN]
or [CUSTOM]*.
• [SCAN]: Cycle
through
a variety
of
colors
automatically.
• [CUSTOM]*:
1
Press
and
hold
the
M.C.
dial
until
the
color
setting display appears.
2
Set
the
primary
color
(R
(red)/G (green)/B
(blue)) and brightness level ([0]
to
[60]).
You
cannot select a level
below
1
0
for
all
three
of
R(red), G (green), B(blue)
at
the
same time.
You
can also customize
the
preset colors. Select
one
of
the
preset colors,
then
press and
hold
the
M.C.
dial
until
the
color setting display appears.
*
The
CUSTOM
setting
is
only available for
[KEY
COLOR]
and
[DISP
COLOR].
Change
the
display brightness.
BRIGHTNESS
[1]
to
[1
0]
PHONE
COLOR
[FLASHING]
[FLASH
FX
1]
to
[FLASH
FX6]
[OFF]
ILLUMI
FX
[ON], [OFF]
SHORT
PLAYBCK
[1
.0
MIN], [1.5 MIN], [2.0 MIN],
[2.5 MIN], [3.0 MIN],
[OFF]
FLASH
AREA
[KEY
/DISPLAY],
[KEY],
[OFF]
Change
the
display brightness.
The available setting ranges
differ
depending
on
[DIM
SETTING].
Select
the
key color
when
a call
is
received.
Applies
the
color set
by
[KEY
COLOR].
Cycle
through
a variety
of
colors automatically.
No change in key color made.
The
illumination
effectcan be seen when:
-there
is
an
incoming
call
-you
are on a
phone
call
-a
CD
is
inserted/ejected
The
illumination
effect will activate
when
the
ACC
power
is
turned
on/off
regardless
of
this
setting.
Select the
length
of
the playback time.
Select
the
area
for
the
illumination
effect.
When [OFF]
is
selected,
the
color
set
under
the
ILLUMINATION settings (page 20)
is
used
as
the
display color.
This manual suits for next models
1
Table of contents
Other Pioneer Car Receiver manuals
Pioneer
Pioneer DEH-1850 User manual
Pioneer
Pioneer DEH-P5700MP User manual
Pioneer
Pioneer AVH-X5750BT User manual
Pioneer
Pioneer DEH-P4500MP XM User manual
Pioneer
Pioneer DEH-2100R User manual
Pioneer
Pioneer KEH-P2030 User manual
Pioneer
Pioneer KEH-P5000 User manual
Pioneer
Pioneer KEH-M6300 User manual
Pioneer
Pioneer DEH-2820MP User manual
Pioneer
Pioneer DEH-P725R User manual
Pioneer
Pioneer KEH-P1015 User manual
Pioneer
Pioneer DEH-2250UBG User manual
Pioneer
Pioneer Premier CDX-P676 User manual
Pioneer
Pioneer DEH-1800R User manual
Pioneer
Pioneer DEH-P6700MP User manual
Pioneer
Pioneer KEH-P8800R User manual
Pioneer
Pioneer KEH-M6236ZH User manual
Pioneer
Pioneer Suepr Tuner III DEH-P7200 User manual
Pioneer
Pioneer super tuner KE-4848 User manual
Pioneer
Pioneer X-HX700 User manual
