Pioneer DVR-210-S User manual

DVD Recorder Training Guide
DVR-210-S & DVR-310-S
Technical Training Department
1925 E. Dominguez Street
Long Beach, CA 90810

Contents
Features………….…....3~10 Start Up Sequence………43
Recording Time….…...11~12 Disassembly…………….44~46
Model Comparison.…...13 Overall Block……………47~48
Block Diagrams……….14~20 Adjustments…………….49~50
CPU Assignment……...21 CDRM (ID)……….…….51~52
Circuit Board Layout.…22~25 Service Mode……………53~60
Block TUMJ Assy…….26~29 DV/1394 Debug Mode….61~62
Main Assy……………..30~36 Error Rate……………….63~64
Power Supply Unit…….37~39 Video adjustments……….65~68
DVD-R/RW Unit………40~41 SI Correction…………….69~70
Specifications……………71

Features
•Disc history
•Easy timer recording
•Advanced Disc Navigator
•Chapter editing
•Chase play , Simultaneous rec & play
•DV terminal (IN/OUT)
•Other convenient features (Video mode)
–Undo finalizing (DVD-RW)
–Title menu with thumbnail
–Wall paper samples of title menu

Disc history
Disc information on up to 30 discs is stored in the memory of DVD recorder.
Without inserting a disc each disc’s status and contents can be seen on GUI by
pushing only one key.

Easy timer recording
This is an optimal setup method for time block programming.
The setup is completed by marking time segments using only the cursor key
without entering the number.

Advanced Disc Navigator
A selected title in the Disc Navigator shown with full motion pictures.
This makes it easy to search the specific disc contents.
Full Motion picture

Chapter editing
A selected scene in the Chapter Edit shown with full motion pictures.
This makes it easy to search and edit the specific contents.
Full Motion picture

Chase play, Simultaneous rec & play
You can playback Recording title
Chase play
You can playback another title
Simultaneous
recording &
playback

DV terminal (IN/OUT)
The DV input is connectable via i.LINK.
The contents can be edited digitally and can be controlled by remote
controller.
This allows consumers to create their own DVD.
A chapter marker is inserted automatically every time there is break in the time
code on the DV tape. This happens when the recording is stopped or paused then
restarted.