Pioneer CS-907G User manual

Setvice
PALE VuEV
SPEAKER SYSTEM
CcSs-9307
GE
CS=70'7
G,
E,
US
CS$"607
«cus
1.
REMOVAL
METHOD
(CS-607)
(CS-907, CS-707, CS-607)
e Woofer and Network Assembly
1. Remove the grille,
Grasp both ends of the top part of the grille and pull
out on it to remove.
2. The woofer can be removed by undoing the 8 screws
(Phillips screwdriver needed) and 8 bolts (socket wrench
needed),
8. The network assembly can be taken out after removing
the woofer,
e Indicator Assembly
1. Use a small screwdriver or punch-like instrument to
remove the panel. Then undo the 3 screws and take off Panel
the
indicator
assembly,
(CS-907,
CS-707)
After repairing it, attach it to a new panel.
ORDER NO.
ARP1248-A
Indicator assembly
PIONEER ELECTRONIC CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153, aanen
PIONEER ELECTRONICS SERVICE INC. P.O. Sox 17680, Long Beach, California 90801 U.S.A.
TEL: [phone]
PIONEER ELECTRONIC (EUROPE) N.V. Keetbergiaan 1, 2740 Beveren, Belgium TEL: 03/775: 28:08
PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 178-184 Boundary Road, Braeside, Victoria 3195, Australia
TEL: [phone]
MG
©
SEPT.
1986
Printed
in
Japan

CS-3907, CS-707, CS-607
2.
EXPLODED
VIEW
AND
PARTS
LIST
Exploded View of CS-907/E,G
NDICATOR
ASSEMBLY
|
PSS Sra ree ra Sa
Replace
the
super
tweeter
together
with
the
flange.
(The
super
tweeter
and
flange
are
heat
sealed
together.)
NOTES:
Exploded View of CS-707/E,US
INDICATOR ASSEMBLY
e Parts without part number cannot be supplied.
e
The
A\
mark
found
on
some
component
parts
indicates
the
importance
of
the
safety.
factor
of
the
part.
Therefore,
when
re-
placing, be sure to use parts of identical designation. |
Exploded View of CS-607/E,G,US
INDICATOR ASSEMBLY
i
|
I
1
I
1
i
i
t
NOTE:
The
parts
installation
locations
and
their
sizes
vary
according
to each model.
CS-907:
4-way,
7-speaker
system
CS-707:
4-way,
5-speaker
system
CS-607:
4-way,
5-speaker
system
© For your Parts Stock Control, the fast moving items are indicated with the marks ** and *.
* * GENERALLY MOVES FASTER THAN *
This
classification
shall
be
adjusted
by
each
distributor
because
it
depends
on
model
number,
temperature,
humidity,
etc.
e
Parts
marked
by
“@”
are
not.
always
kept
in
stock.
Their
delivery
time
may
be
longer
than
usual
or
they
may
be
un-
available.
Parts List of CS-907/E, G
Mark Part No,
SMG-438
© SWN-529
SAX-372
SNK-909
SNK-911
SNK-910
kk ~ B42ZG
SEP-032
SKX-029 —
SFH-025
Description
Grille
Network assembly
Panel
Mid-flange
Diffuser
Flange
Speaker (Super tweeter)
Bushing _
Input terminal plate.
Horn
Mark
xk
kk
kk
Part No.
SAA-069
PMZ30POS0FMC
PTZ30P100FMC
40-810A
16-753A
PD-009A
SBA-133
RWC38P450FMC
SBA-215
Description
Knob
Screw
Screw
Speaker (Woofer)
Speaker (Mid-range)
Speaker (Driver)
Screw
(For
installing
the
mid-
range,
the
super
tweeter
‘and
the
tweeter)
Screw
Screw
(For
fixing
the
woofer
edges)

CcS-707,CS-607
Parts
List
of
CS-707/E,
G,
US
Parts
List
of
CS-607/E,
G,
US
Mark
Part
No,
Description
Mark
Part
No.
Description
SMG-438
Grille
SMG-439
Grille
©
SWN-530
Network
assembly
SAX-374
Panel
SAX-373
Panel
©
SWN-531
Network
assembly
SNK-906
Mid-flange
SNK-906
Mid-flange
SNK-907
Flange
SNK-907
Flange
xx
B42ZG
Speaker
(Super
tweeter)
xk
B42Z2G
Speaker
(Super
tweeter}
SNK-911
Diffuser
SNK-911
Diffuser
SKX-029
input
terminal
plate
SKX-029
Input
terminal
plate
SEP-032
Bushing
SEP-032
Bushing
SFH-025
Horn
SFH-025
Horn
SAA-069
Knob
PTZ30P100FMC
Screw
PMZ30POSOFMC
Screw
xe
30-789A
Speaker
(Woofer)
PTZ30P100FMC
Screw
kk
12-749A
Speaker
(Mid-range)
wk
40-810A
Speaker
(Woofer)
xk
PD-009A
Speaker
(Driver)
ak
12-749A
Speaker
(Mid-range)
SBA-133
Screw
(For
installing
the
woofer,
,
the
mid-range,
the
super
ek
PD-009A
Speaker
(Driver)
tweeter
and
the
tweeter)
SBA-133
Screw
(For
installing
the
mid-
range,
the
tweeter
and
SBA1004
Screw
(For
fixing
the
woofer
edges)
the
super
tweeter)
RWC38P450F
MC
Screw
;
(For
installing
the
woofer
of
G
type)
SBA-204
Screw
(For
installing
the
woofer
of
E,
US
type)
RWC38P450FMC
Screw
SBA-215
Screw
(For
fixing
the
woofer
edges)

3.
CIRCUIT
DIAGRAM
AND
PARTS
LIST
3.1 CS-907/E,G
Circuit
Diagram
of
Network
Assembly
NETWORK ASSEMBLY (SWN-529)
C1 330uF
od RE C2 330uF BLU
INPUT
: pam Lice Fi Woofer
O O
BLK GO] | wr
H BRN
db WHT
= aet 4 CO IGRN © ;
oleelol —____t ota bk | Mid-anes
ad
PLL | war | | @@. Cf ney e
SEER RT [ae Gace | IL ven
O
pS ee
i ae ETETETEA sw
wire
J
28
|
|
o7®
ois
@)
p21
=e
p23
@)
025
@)
027)
.
] 029 al; i, “¢ , D6 ® of Cy) 2 aS 22 ® oi 026 ® [ie 28)
ORANGE
a,
"
por
° 9 &) er" gy ih)
4 My 09
22/8
°°
ee
Re
id
es
Ree
ee
ee
DinDI6 + «182473 Wwa7 + 2802608
bis027 + SLH-S6
D26,D29 + 1SR35-100 |
—w|
le
|
+
Mlumination voltage
ORANGE
wae
Power
Indicator
IHumination
Voltage
ian
|
ras
ona
a)
o
CE
Ea
A BLACK
voltage
CRISP
TONE SELECTOR SWITCH | “4°
; . Measurement conditions
@ Input is GOHz sine wave.
P.C.B.
Pattern
of
Power
Indicator
Assembly
(SWX-131)
Q
7
Q7
a6
os
a4
Q3 a2
ai
QW? : 2802808
Dint4 : 182473, DIS~27 © SLH-56 026, 29 : 1ISR35-100
‘TONE SELECTOR switch d i
To Network Assembly

Parts List of CS-907/E, G
NOTES:
e Parts without part number cannot be supplied.
e The A mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when re-
placing, be sure to use parts of identical designation.
e For your Parts Stock Control, the fast moving items are indicated with the marks ** and *.
** GENERALLY MOVES FASTER THAN *
This classification shall be adjusted by each distributor because it depends on model number, temperature, humidity, etc.
e Parts marked by “@” are not always kept in stock. Their delivery time may be longer than usual or they may be un-
available.
Network Assembly (SWN-529)
is Mark Symbol & Description
Li Choke coil (22 mH)
L2 Choke coil (0.39 mH)
€1,C2,C3 Capacitor (330 uF)
C4,C5 —s- Capacitor (3.3 uF)
C6 Capacitor (1.5 uF)
R1 Resistor (3.92, 5W)
Wedge-base bulb
kk Poly switch
Part No.
CES4SM331KH
CES43R3KJ
CES41R5KJ
RTF5AL3R9J5C
SEL-011
$SG-020
Power Indicator Assembly (SWX-131)
Mark
kk
*
*
*
kk
Symbol & Description
Q1-Q7 Transistor
D1i—D14 Diode
D15—D27 Diode
D28,D29 Diode
c1,C2 Capacitor
R1—R9
R10
R11
R12
R13
R14
R15—R21
Switch
(TONE SELECTOR)
(NORMAL-SOFT-CLIP)
Part No.
2SC2808
182473HS
SLH-56MC
1SR35-100HO
CEA220M50
RD1/4PM912J
RD1/4PM222)
RD1/4PM112J
RD1/4PM5615
RD1/4PM4715
RD1/4PM361J
RD1/4PM330J
SSG-019

3.2 CS-707/E,G, US
Circuit
Diagram
of
Network
Assembly
NETWORK ASSEMBLY (SWN-530)
ot RED 02 330gF BLU
von elt
|
ay
|e
Woofer
BLK S|
4 |S
WHT
= eed phy = ne a @
i | a end erence
OWwHT ©
cc ae if
Lo
BLK
fol
L@@t
|
|
Psw
C5
1.50F
Bio
3
2
osm
jam
|
IC
Tweeter
ee
ae Super tweeter
| Ce GRY
WHITE 024
o
Circuit
Diagram
of
Power
Indicator
Assembly
(SWX-132)
+
025 1
22/50!
ORANGE re.
c2
22/80
Diwpl2 + «182473
SLH-56
ISR35-100
Ituminetion voltage
ORANGE
1
NORMAL
|
TONE SELECTOR SWITCH
P.C.B.
Pattern
of
Power
Indicator
Assembly
(SWX-1
32)
j DIS~D23: SLH- :
pe4,p26 : 1s
OR eA ee a ee
Power Indicator Illumination Voltage
feo
+
faa [a8
[or [oo
fom]
imine
|v
[ase]
zav
en
|
vv
vay
Measurement conditions
@ Input is 60Hz sine wave.
SOFT
TONE SELECTOR SWITCH
To Network Assembly :
Q1~6: 25C2808 mest ste te seee 6
Oln12 : 1824735 DIZ~23 : SLH-56 . . D24, 25: ISR35-100

Parts List of CS-707/E, G, US
NOTES:
e Parts without part number cannot be supplied.
e The A
placing, be sure to use parts of identical designation.
© For your Parts Stock Control, the fast moving items are indicated with the marks ** and *.
** GENERALLY MOVES FASTER THAN *
This classification shall be adjusted by each distributor because it depends on model number, temperature, humidity, ete.
e Parts marked by ‘‘@” are not always kept in stock. Their delivery time may be longer than usual or they may be un-
available.
Network Assembly (SWN-530)
Mark
Symbol & Description
L1 Choke coil (22 mH)
L2 Choke coil (0.39 mH)
C1,C2,C3 Capacitor (330 uF)
C4 Capacitor (3.9 uF)
C5 Capacitor (1.5 F)
R1 Resistor (3.92, 5W)
Wedge-base bulb
Part No,
STH-339
STH-431
CES4SM331KH
CES43R9KJ
CES41R5KJ
RTF5AL3R9JC
SEL011°
Power Indicator Assembly (SWX-132)
Mark
kk
+ + +
kk
Symbol & Description
Q1—06 Transistor
Di-—D1i2 Diode
D13—D23 Diode
D24,D25 Diode
C1,C2 Capacitor
R1—R8
RQ
R10
R11
R12
R13—R18
Switch
(TONE SELECTOR)
Part No.
2SC2808
1$2473HS
SLH-56MC
1SR35-100HO
CEA220M50
RD1/4PM912J5
RD1/4PM222J
RD1/4PM112J
RD1/4PM561J
RD1/4PM471J
RD1/4PM330J
$SG-019
(NORMAL-SOFT-CLIP)
mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when re-

3.3 CS-607/E,G, US
Circuit Diagram of Network Assembly
NETWORK ASSEMBLY (SWN-531)
L2 0.22mH
cc) Os
NPUT
Po
awl]
Woofer
[ae
Lt 8mH BAN
WHT
GRN ©
[@@_.
x:
ie se ee rt
ng Mid-range
WHT ©
PSW C41.5xF S13 0.27mH Sco | Of Tweeter
i ae ser wee
Power Indicator Illumination Voltage
Measurement conditions
08: e Input is 6OHz sine wave.
o7 ® pe ® Dat @
i oa ® ore ? ore ® 20 &
22/50 Bik
)
DiwDI2 = 182473 Q1v06 + 2802808 ]
DI3~D25 = SLH-56
024,025 = 1SR35-100
ORANGE
P.C.B. Pattern of Power Indicator Assembly
Qi : 2802808
__ Oia: 182473 DIS~23= SLH-56 = 24. 26 = 1SR35-100
To Network Assembly

Parts List of CS-607/E, G, US
NOTES:
e Parts without part number cannot be supplied.
© The A
placing, be sure to use parts of identical designation.
e
For
your
Parts
Stock
Control,
the
fast
moving
items
are
indicated
with
the
marks
**
and
*.
x * GENERALLY MOVES FASTER THAN * :
This
classification
shall
be
adjusted
by
each
distributor
because
it
depends
on
model
number,
temperature,
humidity,
etc.
e
Parts
marked
by
“©”
are
not
always
kept
in
stock.
Their
delivery
time
may
be
longer
than
usual
or
they
may
be
un-
available.
Network Assembly (SWN-531)
Mark Symbol & Description
u1 Choke coil (8 mH)
L2 Choke coil (0.22 mH)
L3 Choke coil (0.27 mH)
c1,C2 Capacitor (330 uF)
C3 Capacitor (2.7 uF)
C4 Capacitor (1.5 uF)
R1 Resistor (332, 5W)
Wedge-base bulb
Part No,
STH-372
STH-254
STH-377
CES4SM331KH
CES42R7KJ
CES41R5KJ
RTSB330K
SEL011
Power Indicator Assembly
Mark
kk
*
*
*
Q1-—6
Di—-D12
D13—D23
D24, D25
C1,C2
R1—R8
R9
Ri0
R11.
R12
R13—R18
Symbol! & Description
Transistor
Diode
Diode
Diode
Capacitor
mark
found
on
some
component
parts
indicates
the
importance
of
the
safety
factor
of
the
part.
Therefore,
when
re-
Part No.
2SC2808
1S2473HS
SLH-56MC
1SR35-100HO
CEA220M50
RD1/4PM912J
RD1/4PM222J
RD1/4PM112J
RD1/4PM561J
RD1/4PM471J
RD1/4PM330J

(3-907, cs-707,CS-607
4. PACKING PARTS LIST
Parts List of CS-907/E, G
Mark
Part No.
SHG-937
SHG1020
SHB-188
SHB-193
SHB-189
SHC-430
KDD-012
SRB-473
Description
Packing case (G type)
Packing case (E type)
Top pad A
Top pad B
Bottom pad
Cover
Speaker cord
Instruction manual!
Parts List of CS-607/E, G, US
Mark
10
Part No.
SHG-936
SHG1018
SHG1019
SHB-190
SHB-192
SHB-191
SHC-426
KDD-012
SRB-475
Description
Packing case (G type)
Packing case (E type)
Packing case (US type)
Top pad A
Bottom pad B
Bottom pad
Protection mat
Speaker cord
instruction manual
Parts List of CS-707/E, G, US
Mark
Part No,
SHG-938
SHG1021
SHG1022
SHB-188
SHB-193
SHB-189
SHC-430
KDD-012
SRB-474
Description
Packing case (G type)
Packing case (E type)
Packing case (US type)
Top pad A
Top pad B
Bottom pad
Cover
Speaker cord
Instruction manual