Pixel FC-311 User manual

FC-311 FC-312 FC-313 FC-314
Flashgun Cable
Product Manual
Thank you for purchasing the
high-performance PIXEL product
TTL Cord
Overview
Thank you for purchasing the high-end PIXEL
product TTL Cord. It can control the off-camera
flash to work more flexibly by different angles,
while with same functions when the flash is on
the camera.
Before using this product, please read this
manual carefully to be more familiar with its
function.

Cautions
Included items
Instruction manual
Please check whether all of the items are
included after opening the packing, if missing,
please contact the dealer.
Flash off-camera cable 1Pc
1Pc
1 set
Hot shoe protection cover
1. Make sure both of the camera and flash are turned
off before installing it.
2. It belongs to the electronic accessories, it may not
be used normally due to external factors, while it’s
rare to see, don’t worry!
3. Do not pull the wires when using it.
4. Make sure this device away from strong shock.
5. Do not store the device in the high temperature
environment.
6. Please keep it dry, do not contact with it by wet
hand, nor immerse it in water or expose it in rain
7. Do not use the product in flammable and explosive
circumstances; otherwise it will lead to explosion
or fire

Quick release plate screw
Hot shoe mount
Hot shoe holding nut
Hot shoe foot
Flash connecting side Camera connecting side
The name of each part
Connecting point
the fixed hot shoe mount
Connecting point

Installation
12
Install the camera connecting sideInstall the camera connecting sideInstall the camera connecting sideInstall the camera connecting side
1.
turned off, rotate the screw as the picture
to loosen it.
Please make sure the camera power is 2. Insert the camera connecting side to the
camera hot shoe mount.

3. Rotate the screw as the picture to tighten it.
Make sure the camera connecting side is
installed in the right place, lock it to avoid
it sliding from the camera.
Install the camera connecting sideInstall the camera connecting side
Turn off the camera; rotate it as the picture to
loosen it enough, then pull it out from the
camera.
3
1
2
Remove the camera connecting sideRemove the camera connecting side
Do not pull it out by force.
Installation

1. Follow the figure to install the flash
connecting side to the Quick Shoe.
Install the flash connecting sideInstall the flash connecting side Install the flash connecting sideInstall the flash connecting side
2. Install Quick Shoe to the tripod head.
2
1
Installation

或者将闪光灯连接端直接插入闪光灯支
架进行固定。
Or install the flash connecting side to the
flash bracket according to the picture.
1
1
Install the camera connecting sideInstall the camera connecting side
Make sure the flash is turned off, then insert
it to the flash connecting side and lock it.
Install the flashInstall the flash
Installation

Model and product parameterModel and product parameter
Model
FC-311/S 1.8
FC-312/S 1.8
FC-313/S 1.8
FC-314/S 1.8
FC-311/M 3.6
FC-312/M 3.6
FC-313/M 3.6
FC-314/M 3.6
FC-311/L 10.0
FC-312/L 10.0
FC-313/L 10.0
FC-314/L 10.0
75
75
75
75
122
122
122
122
253
253
253
253
Canon version
camera and flash
Nikon version
camera and flash
Sony version
camera and flash
Olympus or
Panasonic version
camera and flash
0-80
0-180
0-700
0-80
0-180
0-700
0-80
0-180
0-700
0-80
0-180
0-700
Coiled Cable
Length(m)
Off-camera
distance(cm)Compatible Weight(g)
(The data was updated on 1st May, 2011; the latest product will be subject to the actual
parameter.)

Now you can start to use the incredible PIXEL product. If you
have any question, please contact the local dealer or visit to
http://www.pixelhk.com.
RoHS
PSM46 V10.02
This instruction manual is updated at June, . If you
want the new released product information after this date,
please contact to PIXEL dealer for further information.
1st 2011