Planar PJL19W User manual

www.planar.com
USER'S GUIDE
LCD Monitor
PJL19W
C
M
Y
CM
MY
CY
CMY
K
planar PJL19W manual-Cover.pdf 1 2011/10/27 下午 01:26:34

1
Content
Operation Instructions ............................................................................................................2
Safety Precautions ....................................................................................................................3
First Setup ....................................................................................................................................4
Front View of the Product ......................................................................................................5
Rear View of the Product ........................................................................................................6
Quick Installation ......................................................................................................................7
Basic Operation .........................................................................................................................8
Advanced Operation—OSD Menu ..................................................................................10
Supporting Timing Modes ..................................................................................................12
Technical Information ...........................................................................................................13
Wall-mount instruction ........................................................................................................14
Care and Maintenance ..........................................................................................................15
Troubleshooting .....................................................................................................................15
Product Registration and Technical Support ................................................................16
planar PL2210W manual.indd 1 2011/6/21 下午3:17

2
Operation Instructions
Thank you for purchasing this TFT LED Monitor, a high-resolution multi-scan color TFT LED
Monitor.
Please read this guide thoroughly before installation.
FCC RADIO FREQUENCY INTERFERENCE STATEMENT
WARNING: (FOR FCC CERTIFIED MODELS)
This TFT LED Monitor has been tested and found compliant with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
proper protection against harmful interference to a residential installation. This TFT LED
Monitor generates, uses, and can radiate radio frequency energy. Harmful interference to
radio communication may be led as a result if it‘s not properly installed and used. However,
there is no guarantee that interference will not occur in a particular installation. If this TFT
LED Monitor does cause serious interference to radio or television reception, resetting the
TFT LED Monitor may determine it. Moreover, users are encouraged to correct interference
by doing one or more of the following:
● Reorient or relocate the receiving antenna.
● Move the TFT L ED Monitor and the receiver further away from each other.
●
the receiver is connected.
●
FCC Warning:
To assure a continued FCC compliance, a user must use a grounded power supply cord
and the provided shielded video interface cable with bonded ferrite cores. Also, any
unauthorized changes or modi ations to this TFT LED Monitor would void the user‘s
authority to operate this device.
Note: If necessary, shielded interface cables and AC power cord must be used to meet the
emission level limits.
Important Recycle Instruction:
According to WEEE regulation, this TFT LED Monitor can't be handled as normal
trash in Europe when it is out of usage. Please refer to the recycle information
from our website to handle it.
planar PL2210W manual.indd 2 2011/6/21 下午3:17
LED

3
Safety Precautions
This TFT LED Monitor is manufactured and tested on a ground principle that a user’s
safety comes rst. However, improper use or installation may result danger to the TFT LED
Monitor as well as to the user. Carefully go over the following WARNINGS before installation
and keep this guide handy.
WARNINGS:
This TFT LED Monitor should be operated only at the correct power sources indicated
on the label on the rear end of the TFT LED Monitor. If you’re unsure of the power
supply in your residence, consult your local dealer or power company.
Do not try to repair the TFT LED Monitor yourself as it contains no user-serviceable
parts. The TFT LED Monitor should only be repaired by a qualied technician.
Do not remove the TFT LED Monitor cabinet. There is high-voltage parts inside that
may cause electric shock to human bodies, even when the power cord is disconnected.
Stop using the TFT LED Monitor if the cabinet is damaged. Have it checked by a service
technician.
Put your TFT LED Monitor only in a clean, dry environment. Unplug the TFT LED
Monitor immediately if gets wet and consult your service technician.
Always unplug the TFT LED Monitor before cleaning it. Clean the cabinet with a clean,
dry cloth. Apply non-ammonia based cleaner onto the cloth, not directly onto the
glass screen.
Keep the TFT LED Monitor away from magnetic objects, motors, TV sets, and
transformer.
Do not place heavy objects on the cable or power cord.
For pluggable equipment the socket-outlet shall be installed near the equipment and
shall be easily accessible.
planar PL2210W manual.indd 3 2011/6/21 下午3:17

4
First Setup
Congratulations on your purchase of this high performance TFT LED monitor.
This TFT LED Monitor comes with the following accessories :
●LED Monitor
●Power Cable
●VGA Cable (15 pin)
Install the stand base
1. Lay the TFT LED Monitor at on a table with the LED screen face down. To prevent the
monitor from being scratched, put a piece of soft cloth on the table on which the screen
will be set.
2. Unpack the base, one hand hold the monitor, the other hand attach the base to the
stand.
3. Stand the TFT LED Monitor up.
Uninstall the stand base
1. Lay the TFT LED Monitor at on a table with the LED screen face down. To prevent the
TFT LED Monitor from being scratched, put a piece of soft cloth on the table on which
the screen will be set.
2. Hold the monitor down with one hand. With the other hand, use two ngers to press
the hooks down as directed below.
3. Remove the base from the stand.
●User's Guide
●Base
planar PL2210W manual.indd 4 2011/6/21 下午3:17

5
Front View of the Product
1 Auto Image Adjust/ OSD Exits
2
3 Scroll Down/ Adjust Decrease
4 Scroll UP/ Adjust Increase
5
6 LED Indicator
21 3 4 5 6
planar PL2210W manual.indd 5 2011/6/21 下午3:17
C
M
Y
CM
MY
CY
CMY
K
E030055099 planar PL2210W manual-inside-print.pdf 1 9/24/2011 12:34:28 PM
J
19

6
Rear View of the Product
7 Power Input
8 VGA Input (D-Sub 15 pin)
78
planar PL2210W manual.indd 6 2011/6/21 下午3:17

7
Quick Installation
1. Connect either VGA ofrom the monitor to the computer. Make sure both monitor
and computer are powered OFF.
2. Connect power cord to a properly grounded AC outlet, and then to the monitor.
3. Power-ON computer and then POWER-ON the monitor.
4. Set the timing mode on your computer. Recommended resolution and refresh rate
is1366 x 768 @ 60Hz.
Example:
planar PL2210W manual.indd 7 2011/6/21 下午3:17
PC
VGA cable
Power cable

8
Basic Operation
Before using the TFT LED Monitor:
Connect external equipments properly.
Press POWER button on the front of TFT LED Monitor. The power LED indicator lights green
when the TFT LED Monitor is on.
Using the OSD Menu
You are able to use OSD menus to adjust various settings by using menu button on the
front of the TFT LED Monitor.
The basic operation is as following:
Auto Enter Auto Adjusting mode , when not in OSD menu
Exits from OSD menu
Menu Displays main menu and enter items in OSD menu
Select the desired item when in OSD menu
+Select the desired item when in OSD menu
OSD Lock Out Function
When TFT LED Monitor is in normal display, you can enable the“Locking OSD” function.
Option 1: OSD lock – all 4 buttons are locked except the “POWER” button.
Press and hold the Menu button for 5 seconds to lock the OSD buttons.
The TFT LED Monitor will show an “Locking OSD” message for 2~4 seconds and the
message will disappear automatically.
Locking OSD
Repeat this step to unlock.
planar PL2210W manual.indd 8 2011/6/21 下午3:17

9
Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are
locked. Press and hold the button for 5 seconds to lock all 5 buttons.
The TFT LED Monitor will show an “Locking Power Button” message for 2~4 seconds and
the message will disappear automatically.
Locking Power Button
Repeat this step to unlock.
planar PL2210W manual.indd 9 2011/6/21 下午3:17

10
Advanced Operation—OSD Menu
You can use the OSD menu to adjust various settings for your TFT LED Monitor.
Press the Menu button to display the OSD Menu, and use +/- to select the desired OSD
menu.
Short Cuts Function from the button(s)
Auto Adjust: To auto adjust Horizontal Position, Vertical Position, Phase (Fine
Tune) and Clock (H. Size) of the screen.
Luminance: To adjust the Brightness and Contrast of the screen
Management: To manually adjust Horizontal Position, Vertical Position,
Phase, and Pixel Clock.
Color Adjust: To select the color for desired brightness and color saturation
between 9300K, 6500K, 5400K, and User Color.
9300K: Adds blue to screen image for cooler white.
6500K: Adds red to screen image for warmer white and richer red.
5400K: Adds green to screen image for a darker color.
User Color: Individual adjustments for red (R), green (G), blue (B).
1. Press button Menu to select the desired color.
2. Press + or - button to adjust selected color.
OSD: To adjust the OSD menu, Horizontal Position, Vertical Position and
OSD Time Out setting on the screen display.
Language Select: To allow users to choose from available languages.
OSD
planar PL2210W manual.indd 10 2011/6/21 下午3:17
image sharpness.
C
M
Y
CM
MY
CY
CMY
K
E030055099 planar PL2210W manual-inside-print.pdf 1 9/24/2011 12:52:50 PM

11
Recall: To recall factory settings, You can select recall color only or recall all
settings.
Information: To display the information, regarding the current input signal
coming from the graphic card in your computer. Aspect Ratio: To select full-
screen or 4:3 image size.
planar PL2210W manual.indd 11 2011/6/21 下午3:17

12
Supporting Timing Modes
STANDARD RESOLUTION
VGA
VGA
VGA
VGA
VGA
VGA
VGA
VGA
MAC
VESA
Warning:
Do not set the graphic card in your computer to exceed these maximum refresh rates.
Doing so may result in permanent damage to your monitor.
planar PL2210W manual.indd 12 2011/6/21 下午3:17
VESA
VESA
MAC
DMT
CVT
DMT
DMT
DMT
x 480 @ 70Hz
x 480@ 72Hz
x 480 @ 75Hz
x 600 @ 60Hz
800 600 @ 72Hz
800 0 @ 75Hz
832 24 @ 60Hz
1 x 768 @ 60Hz
1024 768 @ 70Hz
1024 768 @ 75Hz
1152 870 @ 75Hz
1280 20 @ 60Hz
68 @ 60Hz
1 00 @ 60Hz
1360 x @ 60Hz
1366 x @ 60Hz
720 x 400 @ 70Hz
640 x 480 @ 60Hz
640
640
640
800
x
x 60
x 6
024
x
x
x
x 7
1280 x 7
280 x 8
768
768
Note:
Simultaneously press[ Auto] and [Menu] keys on monitor panel to switch
between similar PC timings.
Similar PC Timing on list below:
• 720 x 400 @ 70Hz / 640 x 400 @ 70Hz

13
Technical Information
LED Panel 18.5”TFT (LED Backlight)
Power Management
On: 16 Watts (typical)/18 Watts (maximum)
Standby Mode: < 1 Watt
Displayable Resolution 1366 x 768 max. Vertical Frequency 60Hz max.
Pixel Dimension 0.3 x 0.3 mm
LED Display Color 16.7M
Tilt -5° (+0/-2) ~ 20° (+/-2)
Active Display Area 409.8 mm x 230.4 mm
Temperature Operating: 5°C ~ +35°C
Storage: -20°C ~ + 60°C
Compliance FCC-B, CE, cETLus
Power Input Voltage AC100-240 V
planar PL2210W manual.indd 13 2011/6/21 下午3:17
O: < 0.5 Watt

14
Wall-mount instruction
Preparing To Install The Optional Wall Mount Arm (not included)
This TFT LED Monitor can be attached to a wall mounting
arm you can purchase separately.
Turn the power OFF then disconnect the cables from the
TFT LED Monitor before performing the procedure below.
1. Lay the TFT LED Monitor face down on a soft surface.
2. Remove the 4 screws holding the stand to the hinge.
3. Remove the stand.
Attaching The Optional Wall Mount Arm (not supplied)
Follow these steps to nish installing the wall mounting
arm:
1. Place the wall mounting arm onto the back of the
TFT LED Monitor. Line up the holes of the arm with
the holes in the back of the monitor.
2. Insert the 4 screws into the holes and tighten.
3. Reconnect the cables. Refer to the User’s Guide
that came with the optional wall mounting arm for
instructions on attaching it to the wall.
NOTE
● 100 mm x 100 mm VESA high hole (n=4), M4, pitch =0.7 mm
screw mounting kit not included.
100mm
100mm
100mm x 100mm Screw
Mounting Options
4mm, 0.7 pitch
threaded holes x 4
1
2
3
planar PL2210W manual.indd 14 2011/6/21 下午3:17

15
Care and Maintenance
Care
●Avoid exposing your TFT LED Monitor directly to sunlight or other heat source. Place
your TFT LED Monitor away from the sun to reduce glare.
●Put your TFT LED Monitor in a well ventilated area.
●Do not place any heavy things on top of your TFT LED Monitor.
●Make certain your TFT LED Monitor is installed in a clean and moisture-free area.
●Keep your TFT LED Monitor away from magnets, motors, transformers, speakers, and TV
sets.
Note
●Move the LED Monitor out of the package and take o the plastic bag and Polystyrene Foam.
●Pull the base from Parallel versus Panel to Vertical.
●Adjust the Panel within -5(±2) degree leaning forward and 20(±2) degree leaning
backward.
Safety Tips
●If smoke, abnormal noise or odor came out from your TFT LED Monitor, remove the
power cord immediately and call your service center.
●Never remove the rear cover of your TFT LED Monitor cabinet. The display unit inside
contains high-voltage parts and may cause electric shock to human bodies.
●Never try to repair your TFT LED Monitor yourself. Always call your service center or a
qualied technician to x it.
Troubleshooting
No power
●Make sure A/C power cord is securely connected to the power adapter and the power
supply is rmly connected to the TFT LED Monitor.
●Plug another electrical device into the power outlet to verify that the outlet is supplying
proper voltage.
●Make sure all signal cables are installed.
Power on but no screen image
●Make sure the video cable supplied with the TFT LED Monitor is tightly secured to the
video output port on back of the computer. If not, tightly secure it.
●Adjust brightness.
Wrong or abnormal colors
●If any colors (red, green, blue) are missing, check the video cable to make sure it is
securely connected. Loose or broken pins in the cable connector could cause an
improper connection.
●Connect the TFT LED Monitor to another computer.
planar PL2210W manual.indd 15 2011/6/21 下午3:17

16
Product Registration and Technical Support
Register Your Planar Products Today
Thank you choosing Planar. To assure you receive all the benefits of your Planar product
and services, register your Planar product today. Visit our website to register your product
at www.planar.com/support/registration/
Cables, Replacement Lamps, Accessories
To nd cables, replacement lamps and accessories for your Planar projector, LED monitor,
touch screen or other Planar products visit our online store at www.PlanarOnline.com or
nd other stores who carry Planar products at http://www.planar.com/howtobuy
Technical Support
Visit Planar at http://www.planar.com/support for product registration, operations manuals,
touch screen drivers, warranty information and access to Planar's Technical Library for
online troubleshooting. To speak with Planar Customer Support please have you model
and serial number available and dial:
Planar Support
Tel: 1-866-PLANAR1 (866-752-6271) or [phone] outside the US.
Hours: 24 hours a day, 7 days a week.
Toll or long distance charges may apply.
planar PL2210W manual.indd 16 2011/6/21 下午3:17

C
M
Y
CM
MY
CY
CMY
K
planar PJL19W manual-rear.pdf 1 2011/10/27 下午 01:27:50