Planet Networking & Communication WDL-U601AC User manual

– 2 –
– 3 – – 4 –
– 7 – – 8 –
– 5 – – 6 –
WDL-U601AC
Quick Installation Guide
433Mbps 802.11AC Dual Band
Wireless USB Adapter
Note
– 1 –
Thank you for choosing PLANET Wireless USB Adapter.
Before installing the adapter, please verify the contents
inside the package box.
If there is any item missing or damaged, please
contact the seller immediately.
Note
Before Installation
1. If you are currently using a wireless adapter,
please uninstall the existing driver and utilities
first.
2. The following installation is performed in
Windows 7. The procedures in other OS’s are
similar.
Quick Guide CD-ROMWDL-U601AC
1. Package Contents 2. Installation
Step 1 : Insert the bundled CD into the CD-ROM drive.
Then a web-menu will appear. Click the “Driver”
hyperlink to initiate the installation wizard.
2011-E23230-000
The steps above introduce the simple installation of the
WDL-U601AC. For further configuration of Wi-Fi Protect Setup
(WPS), Software AP, etc, please refer to the user’s manual in
the CD. If you have further questions, please contact the local
dealer or distributor where you purchased this product.
Further Information:
Step 2 : Choose the setup language. Step 3 : Click the “Next” button to start installing the
driver.
Step 5 : Insert the USB wireless network card into an
empty USB 2.0 port of your computer when
computer reboots. Never use force to insert the
card; if you feel it’s stuck, flip the card over and try
again.
Step 6 : The following message will be shown below.
Step 4 : Please select “Yes, I want to restart my
computer now” and click “Finish” to finish the
installation.
STEP 7 : You can start to surf the internet by connecting to
the router.

– 2 –
– 3 – – 4 –
– 7 – – 8 –
– 5 – – 6 –
WDL-U601AC
Quick Installation Guide
433Mbps 802.11AC Dual Band
Wireless USB Adapter
Note
– 1 –
Thank you for choosing PLANET Wireless USB Adapter.
Before installing the adapter, please verify the contents
inside the package box.
If there is any item missing or damaged, please
contact the seller immediately.
Note
Before Installation
1. If you are currently using a wireless adapter,
please uninstall the existing driver and utilities
first.
2. The following installation is performed in
Windows 7. The procedures in other OS’s are
similar.
Quick Guide CD-ROMWDL-U601AC
1. Package Contents 2. Installation
Step 1 : Insert the bundled CD into the CD-ROM drive.
Then a web-menu will appear. Click the “Driver”
hyperlink to initiate the installation wizard.
2011-E23230-000
The steps above introduce the simple installation of the
WDL-U601AC. For further configuration of Wi-Fi Protect Setup
(WPS), Software AP, etc, please refer to the user’s manual in
the CD. If you have further questions, please contact the local
dealer or distributor where you purchased this product.
Further Information:
Step 2 : Choose the setup language. Step 3 : Click the “Next” button to start installing the
driver.
Step 5 : Insert the USB wireless network card into an
empty USB 2.0 port of your computer when
computer reboots. Never use force to insert the
card; if you feel it’s stuck, flip the card over and try
again.
Step 6 : The following message will be shown below.
Step 4 : Please select “Yes, I want to restart my
computer now” and click “Finish” to finish the
installation.
STEP 7 : You can start to surf the internet by connecting to
the router.