Planet ENW-9801 User manual

- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
PCI Express 10 Gigabit Ethernet
Adapter
Quick Installation Guide Version 2.0
Thank you for purchasing PLANET ENW-9801 PCI
Express 10 Gigabit Ethernet adapter. It supports x4,
x8, x16 PCI Express interfaces. The 10 Gigabit Ethernet
adapter provides a highly cost-effective solution to
upgrading to the 10 Gigabit network with your existing
Ethernet infrastructures.
Operation System Support:
Windows Server 2008R2 64bits
Windows Server 2012 64bits
Windows 7 32 / 64bits
Windows 8 32 / 64bits
Linux (2.6x to 3.8.0)
Hardware Installation
Step 1: Please turn off your PC.
Step 2: Remove any metal decorations from your
hands and wrists.
Step 3: Remove the cover from your PC.
Step 4: Locate an empty PCI Express slot and remove
the corresponding back plate. Save the screw
for use in Step 6.
3. Please select “Browse my computer for driver
software” for the next step.
4. Insert the bundled CD into the CD-ROM driver.
Installation on Windows 7
Note
This operation is under Win7 which it is
similar to Windows Server 2008.
1. After installing the ENW-9801 to your PC and booting
it up, Windows 7 will detect it and you have to install
driver.
Package Contents
ENW-9801 x 1
Low Profile Bracket x 1
Quick Installation Guide x 1 User’s Manual CD x 1
Step 5: Carefully insert the 10 Gigabit Ethernet Adapter
into the chosen slot and press rmly with
proper push to ensure it is fully seated in the
slot.
Step 6: Secure the 10 Gigabit Ethernet Adapter with
the screw you saved in Step 4.
Step 7: Replace the PC cover.
Step 8: Power on your PC and refer to the next section
to install driver.
5. Please click “Browse” to specify the driver location
to install. (Assume “E” is your CD-ROM drive, the
driver can be found in E:\DR-ENW-9801v2 Driver).
Click “Next” to continue.
The driver is being installed.
2. Please move and right-click the mouse button for
Ethernet Controller item and select “Update Driver
Software”.

- 9 -
- 10 -
- 11 -
- 12 - - 13 - - 14 -
6. During the driver installation, it will pop up one
Windows Security message. Please Click “Install
this driver software anyway” button to continue
installation.
For more details, please refer to the manual of our
bundled CD-ROM.
7. Click “Close” button to complete the driver
installation.