Planet 420TVL User manual

n Specication
General
Image pick-up device 1/3” SONY Super HAD CCD
Horizontal Resolution 420 TVL
Effective Pixels NT: 537(H) x 505(V)
PA: 537(H) x 597(V)
Min. Illuminator 0.2 lux @ F1.2
Signal To Noise Ratio More than 50dB (AGC Off)
Auto Electronic Shutter On - NT: 1/60~1/100000 sec, PA: 1/50~1/110000 sec
Off - NT: 1/60 sec, PA: 1/50 sec
Auto Iris Control DC-drive & Video-drive
Auto Gain Control On / Off
Back Light Compensation On / Off
Flickerless On / Off
Video Output BNC connector, Composite 1.0 Vp-p, 75 ohm
Lens Mount C / CS mount adjustable
Environment
Power Requirement DC 12V
Power Consumption 1.6W
Dimensions (W x D x H) 60 x 130 x 50 mm
Weight 280 g
Operating Temperature -10 ~ 50 Degree C
-5- -6-
n Switches
Switches Description
SYNC MODE
INT MODE: The camera may be operated independently with its
internal crystal control.
L.L MODE: This version without L.L. function
AES The automatic electronic shutter control 1/60 (1/50) ~ 1/100.000
second is employed for using a manual Iris Lens.
Back-Light
Correction
When the object is dark by strong light (sun illumination etc).
Please turn on BLC switch.
Flickerless F.L: Fixes shutter speed at NTSC: 1/100 Sec.; PAL: 1/120 Sec.
ùWhen using this switch, set “AES” OFF. NOM: Normal position
AGC AGC: level varies from 0 to 26dB.
OFF: AGC level is xed at 0 dB

n CCD Box Camera – CAM-BX42
n Packet Content
CAM-BX42 x 1
C/CS Mount Ring x 1
Auto-Iris Connector x 1
Wrench x 1
Quick Installation Guide x 1
-1-
-2-
n Features
● Long life and high reliability are achieved by the use of a CCD image device. This makes
the camera 100 percent solid state. No longer is an image tube needed.
● The Minimum illumination is 0.2 LUX @ F=1.2
● Ease of use in any application is achieved through the small size. The light weight also
improves performance where shock and vibration would affect larger tube type cameras.
● Performance: More than 420 TV lines of resolution.
● Lower power consumption.
● Relatively no interference from magnetic or electrostatic eld.
● Accepts all popular CCTV lenses.
● Easy tracking of lens is accomplished with external adjustment of mechanical focus posi-
tion.
● Built-in Automatic Electronic-Iris.
n Installation
1. Connect a suitable lens to CAM-BX42. If it is an auto-iris lens, please also connect the
auto-iris connector and select DC or Video drive with the switch on rear panel. For DC
drive, you may adjust the DC LEVEL screw to make this lens be drive properly.
2. Please x the CAM-BX42 to a suitable location with a stand.
3. Adjust the camera to the correct direction.
4. Connect Video Output connector to your DVR or CCTV system.
5. Connect a DC 12V power adapter to the Power Input connector.
Note
Before connect power adapter to camera, please make sure the power
output voltage is DC 12V (max. ±10%). If you can not sure this part,
we will suggest to use a DC 12V Switching power adapter. It can provide
stably power output.
-3-
-4-