Planet WNRT-632 User manual

WNRT-632 WNRT-632
their respective owners. Copyright © 2010 PLANET Technology Corp. All rights reserved.
PLANET Technology Corporation
11F, No. 96, Min Chuan Road, Hsin Tien, Taipei, Taiwan, R.O.C.
Tel: [phone] Fax: [phone]
Email: [e-mail] www.planet.com.tw
Quick GuideQuick Guide
2011-E50180-000
VERIFY THE CONTENTS INSIDE PACKAGE BOX
The package should contain the items plus WNRT-632. If any item missed or damaged, please contact the seller immediately
Power Adapter
CD-ROM Ethernet Cable
Quick Installation Guide
Internet
ADSL or Cable
Modem
001101010
Antenna
Notes: for advanced configuration, please refer to the User’s manual on CD-ROM.
System Password: “admin”
STEP 5 : Open web browser, type the default IP address (http://192.168.0.1)
STEP 1 : Locate the AP Router in an optimum
place, adjust the antenna for the best
coverage
STEP 2 : Connect ADSL/Cable Modem to WAN port
STEP 3 : Connect network devices to LAN port
STEP 4 : Connect the Power. Check the LEDs on the front panel are on accordingly
Switch
PC
(DHCP Client or 192.168.0.2)
Internet
ADSL or Cable
Modem
001101010
Switch
PC
(DHCP Client or 192.168.0.2)
Internet
ADSL or Cable
Modem
001101010
Power Adapter

WNRT-632 WNRT-632
their respective owners. Copyright © 2010 PLANET Technology Corp. All rights reserved.
PLANET Technology Corporation
11F, No. 96, Min Chuan Road, Hsin Tien, Taipei, Taiwan, R.O.C.
Tel: [phone] Fax: [phone]
Email: [e-mail] www.planet.com.tw
Quick GuideQuick Guide
2011-E50180-000
VERIFY THE CONTENTS INSIDE PACKAGE BOX
The package should contain the items plus WNRT-632. If any item missed or damaged, please contact the seller immediately
Power Adapter
CD-ROM Ethernet Cable
Quick Installation Guide
Internet
ADSL or Cable
Modem
001101010
Antenna
Notes: for advanced configuration, please refer to the User’s manual on CD-ROM.
System Password: “admin”
STEP 5 : Open web browser, type the default IP address (http://192.168.0.1)
STEP 1 : Locate the AP Router in an optimum
place, adjust the antenna for the best
coverage
STEP 2 : Connect ADSL/Cable Modem to WAN port
STEP 3 : Connect network devices to LAN port
STEP 4 : Connect the Power. Check the LEDs on the front panel are on accordingly
Switch
PC
(DHCP Client or 192.168.0.2)
Internet
ADSL or Cable
Modem
001101010
Switch
PC
(DHCP Client or 192.168.0.2)
Internet
ADSL or Cable
Modem
001101010
Power Adapter