Verifying Successful Installation
To verify successful NIC installation:
1. Right-click My Computer and select Properties.
2. Click the Device Manager tab.
The Device Manager window appears.
3. Scroll down the list of hardware devices to Network Adapters. Click the plus sign (+) to the
left of the icon to d isplay the list of NICs currently configured.
4. Make sure the PCI GN-1200TW is installed and that there is not a red Xor a yellow
exclamation point (!) next to the device.
Uninstalling the Driver
Windows 98SE automatically detects the installation of new hardware. However, Windows 98SE does
not automatically detect removal of driver software. You must first uninstall the NIC driver software
before physically removing the NIC.
To remove the NIC driver and associated software:
1. Start Windows 98SE and log in.
2. Right-click My Computer, and then select Properties.
3. Click the Device Manager tab.
The Device Manager window appears.
4. Scroll down the list of hardware devices to Network Adapters. Click the plus sign (+) to the
left of the icon to d isplay the list of NICs currently configured.
5. Click the NIC you want to uninstall (PCI GN-1200TW), and then click Remove.
6. Click OK to confirm th e removal of the NIC.
Windows prompts for a restart.
7. Turn off the power to the PC.
The driver and associated software are removed from the system. You can now physically
remove the NIC.
