Plantec REEL K60CXW User manual

Technical changes reserved.
Liability excluded for printing mistakes,
also for mistakes in technical data and
illustrations.
Status 10/0
Planar Mobile Communications Antenna K60CXW
WLAN 2400 MHz Window Mounting
•Mountable on glass and non-metallic materials
•No changes and modifications on the car body
•Mounting by adhesive bonding possible on non-metallic surfaces
(adhesive bonding antenna)
Site 1 of 4
Made
in
Germany

Technical changes reserved.
Liability excluded for printing mistakes,
also for mistakes in technical data and
illustrations. Status 10/0
Technical ata
WLAN
Frequency Range 2400 MHz
VSWR* < 2.0 for cable longer than 1.50m
Peak Gain* + dBi typ.
Power max. 10 W
* measured with 0.60m cable on 30x30cm ground plane
Mechanical ata
Dimensions (ØxH) ca. 6 mm x 12 mm
Temperature Range -25°C to + 5°C
Connection (Standard) ca. 3m connecting cable RG 174 with GSM/FME(f)
Other cablelengths and connectors see ordering example and connector list in Internet
Site 2 of 4

Technical changes reserved.
Liability excluded for printing mistakes,
also for mistakes in technical data and
illustrations.
Status 10/0
Radiation diagram (typ.)*
* measured with 0.60m cable on 30x30cm ground plane
Site 3 of 4
Peak Gain +2dBi
WLAN
-80
-70
-60
-50
-40
-30
-20
-10
0
10
-180
-171
-162
-153
-144
-135
-126
-117
-108
-99
-90
-81
-72
-63
-54
-45
-36
-27
-18
-9
0
9
18
27
36
45
54
63
72
81
90
99
108
117
126
135
144
153162 171
peak Gain +8 dBi

Technical changes reserved.
Liability excluded for printing mistakes,
also for mistakes in technical data and
illustrations.
Status 10/0
Mounting Instructions
•To avoid mechanical stress the antenna should not be attached on doors or flaps.
•No extra ground planes are necessary for this antenna (ground plane inside).
•The Operation of the antenna is only guaranteed by installation with the delivered sticker.
•Don't stick the antenna unter +10°C to get an optimal adhension of the sticker.
•Clean seating nonfat before sticking by using the delivered cleaning cloth
•First remove protection foil on one side of the sticker and stick it on the seating, avoid formation of bubbles.
•Now the other protection foil has to be removed from the sticker. Stick the antenna on with it's level side and
advantage direction (cable pointing below) and apply sufficient pressure.
Included in delivery: Sticker; cleaning cloth with isopropanol
Important: Before sticking please test the adhesive bonding possibility of the material!
Ordering example
M60CXW 0300 00 XX XX
Mobile communications antenna
Housing diameter
GSM-Frequency
GPS
Window Mounting
3m RG 174
GSM FME(f)
GPS
Special assembly
Warranty
The lawful warranty conditions apply.
Site 4 of 4