Playcraft Double Sit Down R5 User manual

IMPORTANT NOTES: Read First
For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
DOUBLE SIT DOWN R5
Rev E
5/26/2009
R5-1305
Page 1 of 2
NOTE: Standard R5 Sit Down Wall
shown. Other R5 Sit Down Walls will vary
slightly, but do not affect the assembly.
1705 Double Slide
See Installation Manual Sections
Figure 1.1
See Installation Manual Sections
R5-09 Collars and R5-11 Socket Clamps
FIGURE 1
Double Sit Down R5
(A) Use liquid thread lock (such as Loctite
®
) with all threaded hardware. Important: Liquid thread lock (prior to
curing) helps to eliminate the common problem of "thread seizure" in stainless steel hardware by serving as a
lubricant during assembly.
(B) Refer to Installation Manual for R5-09 Collars, R5-11 Socket Clamps, and 1705 Double Slide assembly
instructions.

Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
DOUBLE SIT DOWN R5
Rev E
5/26/2009
R5-1305
Page 2 of 2
39"
Top of Collar to
Top of Deck
991mm
SIDE VIEW
BOTTOM
Figure 1.1
CLAMP TOP
SOCKET
SOCKET
CLAMP
SIT DOWN BAR DBL. (R5)
Specifications
Parts List
Part #
DESCRIPTION
QTY.
Varies Sit Down Bar Dbl. (R5) 1
HS-1001-R5 Socket Clamp Set R5 2
DOUBLE SIT DOWN:
Shall be fabricated from 1.315" O.D. 12 gauge steel
tubing welded to a 1.029" O.D. 14 gauge steel
extender. Double Sit Down shall have a multi-stage
baked-on powder coat finish.
HARDWARE:
Shall be stainless steel, zinc/nickel plated or
galvanized as required to resist rust and corrosion.
Step 1
Attach Double Slide to deck. (See Note B)
Step 2
Loosely attach collars to posts at height shown in
Side View. (See Note B)
Step 3
Insert ends of Double Sit Down into Double Slide
as shown in Figure 1.
Attach Double Sit Down to collars as shown in
Figure 1.1. (See Note B)
Step 4
Fully tighten all fasteners according to the
"TIGHTENING TORQUE FOR HARDWARE"
section of the Installation Manual.
Periodically tighten all screws, bolts and nuts. A
periodic inspection of all parts is necessary. If a part
is broken or worn, replace immediately. For general
maintenance please refer to our Playground
Maintenance Manual.
Maintenance