Playcraft Multi-Section Horiz. Crawl Tube R5-1500-3 User manual

IMPORTANT NOTES: Read First
For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
MULTI-SECTION HORIZ. CRAWL TUBE
R5-1500-3 Thru 6
Page 1 of 3
Rev D
See Installation Manual Section
Figure 1.2
1708 Tube Support Assembly
Figure 1.1
Assembly
See Installation Manual Section
R5-1601 Panel-Type1 (Rotomolded)
Note: Tube orientations will vary,
see Top View of structure for
appropriate Tube orientations
for the fall height of the equipment or consult you surfacing supply representative.
The Handbook for Public Playground Safety, Publication #325 at www.CPSC.gov for the surfacing appropriate
(A) Use liquid thread lock (such as Loctite
®
) with all threaded hardware. Important: Liquid thread lock (prior to
curing) helps to eliminate the common problem of "thread seizure" in stainless steel hardware by serving as a
lubricant during assembly.
(B) Do not pour concrete until the equipment is completely assembled, leveled and plumbed. Concrete must be
allowed to cure completely before using the equipment (at least 72 hours).
(C) Refer to Installation Manual for R5-1601 Panel-Type1 (Rotomolded) Assembly and 1708 Tube Support
Assembly.
(D) Use appropriate compliant protective surfacing and adjust footing depths accordingly. See free publication -
FIGURE 1
Multi-Section Horiz. Crawl Tube

For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
MULTI-SECTION HORIZ. CRAWL TUBE
Rev D
R5-1500-3 Thru 6
Page 2 of 3
Support to Tube Section. (Refer to Section 1708 Tube
Support Orientation. Dig footing hole and attach Tube
Note A, and Note B)
section of the Installation Manual.
Step 6
Section. Refer to the Top View of your structure for Tube
under and around Horizontal Crawl Tube.
(See Note D)
Step 5
Support Assembly of the Installation Manual, Figure 1.2,
"TIGHTENING TORQUE FOR HARDWARE"
Place appropriate compliant protective surfacing
Fully tighten all fasteners according to the
Step 4
Attach Tube Sections with Tube Support as shown in
figure 1.2.
Note: Tube Support required for every second Tube
Step 3
Attach Tube Sections as shown in figure 1.1. Refer to
your structure top view for appropriate orientation.
(See Note A)
Step 2
Attach Panels to posts/decks. Refer to R5-1601
Panel - Type1 (Rotomolded) Assembly of the
Installation Manual.
Washer 3/8" Lock Nut3/8" x 1" O.D.
Figure 1.1
3/8" x 1" O.D.
Washer
3/8" x 1-1/4" Button
Head Bolt
Figure 2
Bolt
3/8" x 1" Button Head
ROTO PANEL ROUND
Washer
3/8" x 1" O.D.
Step 1
(Factory Assembled)
Attach Tube Section to Panel as shown in Figure 2.
(See Note A)
3/8" x 1" O.D.
Washer
3/8" x 1" O.D.
Head Bolt
Figure 1.2
SECTION
STRAIGHT TUBE SUPPORT 3/8" x 1" O.D. Washer
3/8" Lock Nut
3/8" x 1" O.D. Washer
Washer
3/8" x 1-1/4" Button
3/8" x 1-1/2" Button Head Bolt
3/8" Lock Nut
CRAWL TUBE
CRAWL TUBE
SECTION

Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
MULTI-SECTION HORIZ. CRAWL TUBE
R5-1500-3 Thru 6
Page 3 of 3
Rev D
Specifications
Periodically tighten all screws, bolts and nuts. A
periodic inspection of all parts is necessary. If a part
is broken or worn, replace immediately. For general
maintenance please refer to our Playground
Maintenance Manual.
Maintenance
TUBES:
Shall be constructed of UV-stabilized, rotationally
molded linear low density polyethylene with an
average wall thickness of .250".
HARDWARE:
Shall be stainless steel, zinc/nickel plated or
galvanized as required to resist rust and corrosion.
Parts List
Assembled Parts List
Part #
DESCRIPTION
For all Multi-Section
Horiz. Crawl Tubes
VARIES Horizontal Crawl Tube Section MM 1
VARIES Horizontal Crawl Tube Section MF 1
R5-1601 Panel Round R5 2
9103052-TR Bolt Button Head 3/8" x 1" 24
9333002 Washer Flat 3/8" x 1" O.D. x .100" thick 24
Part #
DESCRIPTION
R5-1500-3
3 Section R5-1500-4 4 Section R5-1500-5 5 Section R5-1500-6 6 Section
VARIES Horizontal Crawl Tube Section 1 2 3 4
FS-1708-STRT Tube Support Straight 1 1 2 2
9103062-TR Bolt Button Head 3/8" x 1-1/4" 21 33 42 54
9333002 Washer Flat 3/8" x 1" O.D. x .100" thick 42 66 84 108
9413002 Nut Lock 3/8" 21 33 42 54