Playvision AA6014 User manual

User Manual
3 Port HDR HDMI Switcher
Model NO: AA6014

Introduction
Dear customer
Thank you for purchasing this product. For optimum performance and safety, please read
these instructions carefully before connecting, operating or adjusting this product. Please
keep this manual for future reference.
Our series of converters, switchers, extenders, matrixes and splitters are designed to
make your A/V device use more convenient, more comfortable, more productive and
more cost-efficient.
The device can switch 3 HDMI Inputs to one HDMI Output, it can easily switch three
routes of UHD Source to any one UHD display or projector.
Our devices offer solutions for noise, space and security concerns, data center control,
information distribution, conference room presentation, school and corporate training
environments.

INTRODUCITON
Feature：
⚫Three HDMI Inputs switch to one HDMI Output
⚫Support 4K@60Hz UHD signal input and output.
⚫Support Remote control and HDMI auto switch.
⚫LED Status Light shows clearly the working state.
⚫In 4K@60Hz HDMI UHD resolution, HDMI Input and Output distance can be up to 5m
using the AWG26 standard HDMI Cable. In other HDMI resolution, HDMI Input and
Output distance can be up to 10m using the AWG26 standard HDMI Cable.
⚫Easy-Install
Accessories Content:
1、Manual
2、Remote
3、5V Power Adaptor
Physical Connect Port:
Picture 1.0 Front Panel Showing
A：Standby and Start Button
B：Standby Status LED, when light goes bright, the device goes to Standby State.
C：HDMI Input Channel Switch Button
D：HDMI Input Channel Three LED Status Light
E：HDMI Input Channel Two LED Status Light
F：HDMI Input Channel One LED Status Light
G：Remote IR Window Port.

Picture 1.1 Rear Panel Showing
A: HDMI Input One, Two, Three Port
B: HDMI Output Port
C: 5V DC Port
Remote Button Function Showing

“OFF”： Standby Button, when device is working normally, it will go to Standby
status if you press the button and also the Standby Led Status Light will go bright;
“ON”： Start Button, when device is Standby status, it will go to working normally if
you press the button and also the Standby Led Status Light will go off;
1, 2, 3: HDMI Input Channel Switch Button. When you press the “1” Button, the device
will go to the matched input 1 channel.
：HMDI input channel switch button, If you press“ ”button ,The input channel switch
according to clockwise, If you press “ ” button ,The input channel switch
counterclockwise.
* Pls take out the film at the rear of the remote before you use. Pls insert the film to remote
rear if you do not use the remote for long time.
Connection and Operation:

1. To use HDMI Cable to connect the HD Source with the HDMI Input port of device.
2. To use HDMI Cable to connect the HDMI Output port of device with the Display.
3. To connect the DC5V power adaptor with the DC5V port of the device.
4. Then press again the Switch Button at device or press the 1,2,3 button at remote,
it can choose the input channel that you want.
Spec:
Mode No
AA6014
Mode name
3 Port HDR HDMI switcher
Input channel
3 port
Output channel
1 port
Video format
480P/720P/1080P/2160P
Deep color
8/10/12Bit@480P/720P/1080P 8Bit@2160P
Audio format
Dolby HD/DTS HD/Dolby Atoms/Dolby AC3/DTS/LPCM......
Transmission bandwidth
25~600MHz
Transmission rate
0.75~18Gbps
Auto switch
Support
Input cable length
2160P/AWG 26 ≤5m
1080P/AWG 26 ≤10m
Output cable length
2160P/AWG 26 ≤5m
1080P/AWG 26 ≤10m
DC input specification
DC 5V/1A
Max working current
500 mA
Working temperature range
0 ~ +40℃
Working humidity range
5 to 85%RH（No Condensation）
Storage temperature
-15 to 55℃
Storage humidity
5 ~95%RH(No Condensation)
Size
111.2x52.9x20.8 (mm)
Weight
154 g

Notes:
Pls use the machine as the instruction listed to keep the long use lifetime of the
machine.
1. The machine should be placed at the spot far from the Damp, High-Temperature,
Dusty, Erosive, and oxidative environment.
2. All parts will be free from the strong shake, hit, fall.
3. Touching the power adaptor with the wet hands is prohibited.
4. Pls hold the power adaptor head and do not pull the power cord when cut off from
the socket.
5. Pls turn the power off when the machine is not used for long time.
6. Pls do not open the cover and do not touch the inside parts.
7. Pls use the original factory power adaptor.
8. .It does not support the conversion between DVI and HDMI signal Pls use your
signal source and display following the correct process.
Before power on, pls check the connection line carefully. And make sure that all
interfaces are normally connected. The common trouble shooting way shows below:
Serial NO
Trouble
Description
Cause and Ways to deal with
1
Non-Power-Conn
ected
1、Check the HD Source is truly and correctly inserted.
2、Check the HD Source is in on status.
2
No Picture
1、Pls to make sure that the TV is on and has been
connected to the machine,
2、To check if the signal source is on and well
connected.
3、Check the system connection quality.

4、Check if the line is all good quality.
5、Check the cable quality.
3
Obscure Picture
1、To try again to connect the cable to be free from the
unsuccessful connection.
2、HDMI Cable Quality
4
No sound
1、Please confirm the setting position of audio mode
switch
5
Remote
1、Pls check if the film that stops the current has been
taken out.
2、To check if the remote battery is working well.