Plinius INSPIRE 880 Assembly instructions

The heart of music
www.pliniusaudio.com
Plinius Inspire Integrated Amplifi er
USB Driver Installation
The USB input of the Inspire 880 and Inspire 980 integrated amplifi er is supported by the following
operating systems:
• Windows XP – using the provided driver
• Windows 7 (32 and 64 bit) – using the provided driver
• Windows 8 (32 and 64 bit) – using the provided driver
• Windows 10 (32 and 64 bit) – using a driver built into the operating system
• MacOS (10.6.4 and later) – using a driver built into the operating system.
Windows 8 USB Driver Installation:
1. Connect the Inspire Integrated Amplifi er to your computer using a USB A to USB B cable.
»Power up the Inspire Integrated Amplifi er and select the USB input.
»A Device Setup window will appear, but as Windows does not include drivers for this device it will not
be successful.
2. Run the fi le XMOS USB Audio Class 2.0 driver (3.20.0).exe.
»Press Next, the driver will check that an Inspire Integrated Amplifi er is connected to your computer.
»Accept the driver agreement and chose where to store the driver. Press Install.

The heart of music
www.pliniusaudio.com
Plinius Inspire Integrated Amplifi er
USB Driver Installation
Windows 8 USB Driver Installation (Continued):
3. Allow the installation to fi nish, then press Finish.
»The driver is now installed.
»Open the Control Panel and open Sound to select the Inspire Integrated Amplifi er’s USB input as your
computer’s active audio output.
»Select the Playback tab and right click on the entry XMOS USB Audio.
»From the context menu select Set as Default Device.
The Inspire Integrated Amplifi er will now be selected automatically as the active audio output when it is
connected and out of standby. When the Inspire Integrated Amplifi er is in standby or not connected, your
standard audio hardware will be active.