PNJcam SD19 MagiCam User manual

SD19

Contents
Precautions............................................................................................................ 1
Preface .................................................................................................................. 1
Product Certification ............................................................................................. 2
Product Overview.................................................................................................. 2
Product Structure (outline drawing)....................................................................... 3
Functions & Features ............................................................................................. 4
Installation ............................................................................................................ 6
Operating Instructions........................................................................................... 8
Parameter Settings ..............................................................................................11
Operations .......................................................................................................... 14
File Storage and Play............................................................................................ 24
Adapter ............................................................................................................... 26
Standard Accessories........................................................................................... 27
Optional Accessories ........................................................................................... 28
Specifications & Parameters................................................................................. 29
FCC Notices ......................................................................................................... 30
Notices for Waterproof Casing ............................................................................ 31
Cautions in Using 3M Double-Sided Foam Sticker ............................................... 31

aee.com
-1-
Precautions
1. This camera is a precision product. Please do not drop it or hit it physically.
2. Keep the camera away from any object with a strong magnetic field, like magnet or electromotor, or any object
emitting strong radio waves, like antenna, as a strong magnetic field may cause failure to SD19 or cause damage to
image and audio data.
3. Do not expose the camera to high temperature or sunlight direct.
4. Keep the Micro SD card away from the strong magnetic field of TV, speaker, or magnet. Do not put it in any place
with potential static, or the data stored in it may be lost.
5. If the camera overheats, smokes or smell in charging, please disconnect the power supply immediately to avoid the
risk of fire.
6. Put SD19 beyond the reach of any child for charging, as the power cord may cause an accidental suffocation or
electric shock to the child.
7. Please keep this product in a cool, dry, and dust-free place.
Preface
Thanks for purchasing AEE hands-free mini high-definition digital camera SD19. With small size and integrated design,
hands-free SD19 is easy to operate. Supported by high-definition and dynamic image capturing technology, it can record
real scenes and various activities anytime anywhere, so that you can share wonderful recording experiences with your
family and friends.
This manual specifies how to use and install SD19 and provides detailed information,including the instructions on use,
operation and installation as well as the technical specifications. Please read this Manual carefully to understand it before
use and keep it well for long-term reference.

aee.com
-2-
-3-
Product Certification
As certified by such authoritative organizations as FCC and CE, this product complies with the recommended standards
and thus guarantees the user's safety.
Product Overview
As a multifunctional non-handheld highdefinition digital sports video camera, this product can perform many leading
functions such as high-definition digital photographing, voice storage, real-time display, voice-activated video recording,
photo shooting, time display, remote control, digital zoom, TFT color screen, multifunctional keys, laser indicating, high-
speed USB data transmission, HDMI high-definition output function, low power prompt, memory card space prompt and
USB charging. Supplemented by the accessories, this product integrating multiple patented technologies can be used to
photograph anything, anytime, anywhere.
Do not litter! Please recycle them!

-2-
aee.com
-3-
Product Structure (outline drawing)
1.TFT display screen 2.MENU key 3.Up key
4.Left key 5.Down key 6.Recall key
7.OK key 8.Push button of TFT display screen clip 9.Lanyard hole
10.Buzzer 11.SD Card slot 12.Right key
13.USB output interface 14.Record 15.Green indicator of video/voice recording
16.Power switch 17.Microphone 18.Red indicator of working/charging
19.LCD segment screen 20.Shutter 21.VOX switch
22.Camera Lens 23.Indicator (red) of video recording/shooting 24.Laser transmitter
25.AV output interface 26.HDMI output interface 27.Thread interface

aee.com
-4-
-5-
Functions & Features
> 175°extra-large wide-angle lens;Aperture f/2.8;
> 5.0 mega high-definition camera, supporting 720P/960P/1080P high-definition video recording;
> Photo shooting function, supporting a maximum resolution of 3200x2400;
> Laser indicating function;
> 4X digital zoom function; Applicable for 720P mode of NTSC standards
> Laser synchronous video recording function;
> Video loop coverage function;
> Voice recording function;
> With LCD segment screen and split TFT main screen, to display various working states in real time;
> With waterproof case, the waterproof grade is IP68, the waterproof depth is up to 100 meters, and it has two back
cover designs;
> TFT display screen, to play and recall videos, and shoot;
> Voice-activated video recording function, to support voice-activated recording funcition and only record the selected
videos, supporting a longer standby time;
> With built-in dismountable high-capacity lithium battery, it can be re-charged;
> Better image effect, three video output modes available for your selection:
1080P(1920x1080) 30f/s, Applicable for 1080P models
960P (1280x960) 30f/s, Applicable for 1080P models
720P (1280x720) 60f/s, Applicable for 1080P models
720P (1280x720) 30f/s,
WVGA (848x480) 60f/s,
QVGA (320x240) 30f/s; Applicable for 720P models

-4-
aee.com
-5-
> Battery power detection and Micro SD card free space detection;
> High-speed dynamic video recording, supporting an instant response to bright and dark environments;
> Auto exposure, auto white balance, easy to operate;
> Delicate and stylish exterior design;
> HDMI high-definition interface and AV output interface, to connect a high-definition display device or TV to view
files;
> Supporting a Micro SD card of 32G max.;
> High-quality color fidelity, clearer and more realistic image;
> It can remote control video recording, stopping and shooting of SD19 by using wireless remote control; unique code
pairing function, avoiding interference of other remote control;
> Recording MOV videos, to be directly played by PC or uploaded onto video websites;
> Auto standby power-saving function;
> Supporting fast forward and fast rewind, and skipping of contents in the next segment (when connecting with TFT
screen player);
> Supporting time setting (RTC function) and time superposition function;
> Supporting USB2.0;
> Built-in microphone, forming high-quality voice recording effect;
> Various sport accessories, truly realizing the video recording of sports;
> Good seismic resistance;
> Various shooting modes available: Single shooting, three photos continuous shooting, continuous shooting;
> Settings auto saving.

aee.com
-6-
-7-
Installation
1. The SD19 can be either handheld or realized non-hand-held use combining with various non-hand-held accessories.
The camera can be installed in where you want; or the camera can be installed in the water by the waterproof case to
photograph scene in the water.
The installation is shown as follows:
(1) Installation and removal of TFT display screen and main body
TFT display screen Main body Install TFT display screen onto the main body
Pull out display screen: Please pull out the display screen after pressing Push key.
(2) Installation of waterproof case and main body
Main body Waterproof case Install main body into the waterproof case

-6-
aee.com
-7-
Note to use waterproof case
★ Handle with care to avoid damaging waterproof case caused by drooping or physical shock.
★ Please clean with clear water as quickly as possible after using and dry out to avoid rusting.
2. Installation of remote control
There is a separate remote control attached to the SD19. Please install the remote control onto the correct position
based on the accessories below:
(1)Velcro (2)Clip (3)Binding tape (optional)

aee.com
-8-
-9-
Operating Instructions:
Preparations before use:
(1) Start up and check the power of SD19
Turn the power switch to “ON”, the system comes into play. After the red indicator is bright constantly, the
corresponding icons on LCD segment screen will be lightened to enter normal preview state.
At this time, it can view the following items on LCD segment screen:
A. Record mode: The current record mode can be viewed on the top of LCD segment screen,
“ ” indicates the video recording mode and “ ” indicates the voice recording mode;
B. Photo shooting prompt: The shooting icon “ ” can be viewed on the LCD segment screen. The icon will twinkle
once when shooting one photo;
C. Power icon: The power icon “ ” can be viewed on the top right corner of LCD segment screen. The icon will be
bright constantly after the system coming into play; and the disappearance of the icon means SD19 is shut down or
enters the standby state;
D. Video recording duration: Duration of the current video recording file is displayed on the middle line of LCD segment
screen, such as “ ”. The video recording duration will start displaying when pressing “Record” key once, and
it will stop when pressing “Record” key once again.
Note: The video recording duration respectively on LCD segment screen and TFT display screen is displayed synchronously;
E. Indication of battery power: The battery power icon “ ” can be viewed on the bottom left corner of LCD segment
screen and it will indicate the current battery power after starting up. More black grids indicate the higher power,
and it is lower conversely.
Note: The battery power indication icon will not display under standby or shutdown state;
F. USB connection: The USB mode icon “ ” can be viewed on the LCD segment screen and it indicates whether
the machine is connected with the computer. The green indicator light on the left twinkles slowly.The icon will be

-8-
aee.com
-9-
lightened after connecting with computer in startup state and it will not be displayed when not connecting with
computer;
G. TF card capacity indication: The TF card capacity icon “ ” can be viewed on the bottom right corner of LCD segment
screen to indicate the capacity of TF card. More black grids indicate the higher spare capacity, and it is lower conversely.
The green indicator light on the left remains on when the card is out of memory.
At this time, it can view the following items on TFT display screen:
A. Work mode: The video recording icon “ ” on the top left corner of TFT display screen indicates that it is in video
recording standby state;
B. Battery power: The battery power icon “ ” on the bottom left corner of TFT display screen indicates the spare
power of battery;
C. Resolution of video recording:1080P/960P/720P/WVGA /QVGA on the bottom left corner of TFT display screen
indicates that the system is in 1080P/960P/720P/WVGA /QVGA resolution video recording standby state;
D. Spare storage capacity: Information of whether it has external card " " and spare storage capacity " " can be
viewed on the bottom right corner of TFT display screen;
E. It cannot respond to operations of "<" and ">" under the preview state;
F. SD19 can be charged with the attached power supply or USB cable. The “Red Indicator of Working/Charging” on the
top of the machine will twinkle slowly in charging and it will be bright constantly after fully charging. The charging
duration is about 3.5h;
Note: Before use, please check if there is enough battery power. In case of a low battery power, please charge SD19 via the attached
power supply or USB cable. The “Red Indicator of Working / Charging ” will twinkle slowly in charging and remain red with the
battery icon " " displayed on the TFT display screen after charging.

aee.com
-10-
-11-
(2) Format the Micro SD card
Please select a high-speed Micro SD card only and format it on SD19 before recording any video and voice or
shooting any photo. If the Micro SD card has ever been used on other devices, please format it on SD19 before any
operation for normal usage.
Note: Please confirm whether files in internal memory of SD19 and in Micro SD card are needed before operating; Locked files of
SD19 also can be formatted to remove;
(3) Set the date/time
In preview mode, press “M” key to enter the menu interface, press “>” key to shift to the setup interface
“ ”, press “-” key to select the menu “Date/Time”, and then press “OK” key to enter the setup interface of “Date/
Time” .(Note: To press “M” key can exit from the setup interface)The yellow number indicates the current cursor position.
To press “<” or “>” key can move the cursor and select date or time. Press “OK” key to confirm, and this number will turn
red and value of date or time can be changed. Then press “OK” key again to finish; Finally, move the cursor to “ ” via “<”
or “>”key and press “OK” key to confirm date or time changed.

-10-
aee.com
-11-
Parameter Settings:
In preview mode, press “M” key to enter the menu interface, press “<” or “>” key to move the cursor left and right, and
press “+” or “-” key to move the cursor up and down. After selecting the menu, press “OK” key to set the selected menu
and to press “M” key again can exit.
(1) Setting of camera parameter:
a. Video image resolution: Select 1080P,960P,720P, WVGA or QVGA;
(720P/960P mode do not contain the setup options of 1080P mode and 1080P modle have no the QVGA mode)
b. Bit Rate: the sampling rate in transforming image into digital signals at the time of video recording.Options in recording
modes :1080P (12M/6M)、960P (8M/4M)、720P (8M/4M)、WVGA (8M/4M).QVGA(8M/4M)
Clear image requires high bit rate and large file size at the same time.
c. Laser synchronous shooting: Turn on or turn off the laser transmitter;
d. Shooting mode: Select video recording “ ” or voice recording “ ” ;
Notes:
a. Under the voice recording mode, Press “Record” key once, the system starts recording, voice recording duration is displayed on
the bottom of TFT display screen and the green indicator twinkles slowly; if press“Record” key again, the system will stop and
save the current audio file recorded, the green indicator is off and the red indicator remains bright (the corresponding operating
prompt is on LCD segment screen), and it returns to the preview mode.
b. The voice recording process only responds to operations of “Record”, “Shutdown” and “VOX Switch” key; if turn on “VOX Switch” in
voice recording, the voice recording will be stopped and the file will be auto saved.
c. The laser icon will be displayed on the top left corner of the preview interface when turning on the function of laser synchronous
shooting, which indicates the system is in this shooting mode. At this time, the laser will be turned on when starting recording and it will be
turned off when stopping recording.
(2) Setting of camera parameter:
a. Single shot: The shooting mode is auto set in single shoot when starting up every time; To press “Shutter” once can
take one photo;

aee.com
-12-
-13-
b. Tripple Shot: To press “Shutter” once can take three photos continuously;
c. Continuous shoot: Take one photo every 2s/3s/5s/10s/20s/30s, till to press key to stop or the card is full, or the power
is run out;
d. Self shot: Select the self-timer delay time (0s,5s or10s). Press “M” key to return to “Preview” state after selecting;
press “Shutter” once, the system will start the timer and the self-timer indicator twinkles at the end of the delay time
and it takes one photo. After finishing the self-timer for one time, the system will auto recover the shooting mode to
single shooting. If the 'Self-timer Delay Time” has been set, but the machine is restarted without pressing “Shutter”
key, the machine will auto set the 'Self-timer Delay Time' at the state of 0s;
e. Image resolution: Select 3M, 5M or 8M;
(3) Setting of system parameter:
a. Beep: Turn on or turn off the key tone;
Note: Voice of photo shooting and video recording cannot be turned off through this item. It only turns off the key operation voice
and there is no switch to turn off voice of photo shooting and video recording in the machine system.
b. Self lamp: please turn it on or off before self timing; the default setting is “ON”.
c. Time display: Please set before using; the machine will auto record the shooting date and time when shooting image
and display on the bottom right corner of the file;
d. Loop coverage: The video/audio file will be auto saved in segment once every 15 minutes when setting “Loop Coverage”; and if
it is not set, the video/audio file will be auto saved in segment once every 30 minutes.
Note:The current actual segment file is determined by the file size set, but not determined by the true time, that is to say, the file will
be segmented more than 15/30 minutes at a dark environment.

-12-
aee.com
-13-
e. Auto standby: Select the auto standby time of 0, 2 minutes, 5 minutes or 10 minutes. In case of no any mission and
operation after selecting, the system will start timing and SD19 will turn off input and output to enter the standby
mode at the end of the time set. If there is any operation in timing, the system will re-time.If the video recording
or shutter is operated in the standby process, SD19 will be waked up. The default standby time is 5 minutes when
selecting to restore the factory default;
f. TV output format: NTSC or PAL; the video format outputted to TV can be selected. If the selected format is changed,
please unplug the AV cable and then reinsert it to update the parameters;
g. Format: After confirming that all files recorded are not needed to be saved, all files can be removed by formatting.
Note:If there is no card inserted, the memory of the machine will be formatted; after inserting card, the system will
format the card inserted, but not format the memory of the machine;
h. Factory default: The operation restores the parameter settings to factory default. After restoring, the system will set the display
mode of submenu of the “Menu” in English state. Press “M” key to enter the menu selection, press “<” or “>” key to enter the
menu “Setup”, press “-“ key to select the option “Language”, and then it can set in your desired language. The system will set
the time at 01/01/11 after restoring factory default;
i. Language: “English”, “Simplified Chinese” or “Traditional Chinese” It can select the language via left or right key;
j. Light source frequency: Select the light source frequency 50Hz or 60Hz, depending on local grid frequency, in order
to avoid the screen flickering in preview mode or in video recording;
k. Date/Time: Time can be adjusted and changed. It will be displayed on the bottom right corner of the video file or
photo file when recording or shooting;
Note: To press “M” key under the submenu may exit from it;

aee.com
-14-
-15-
Operations:
1. Insert the Micro SD card.
Note: Please select branded Micro SD card such as SD card of Toshiba and Kingston
2. Turn the power switch to “ON” to turn on SD19, and the red indicator will be lightened and SD19 will enter the
preview mode.
Note:
a. In case of low battery power, you will find the battery icon “ ” and the message “Low Power” on the TFT screen.
b. If no Micro SD card is inserted, you will find the Micro SD card icon “ ” on the TFT screen.
3. Video recording:
(1) Manual recording:
Press “Record” key once in preview state, the system will start recording, the video recording duration will be displayed on
the bottom right of TFT display screen, the “Green Indicator of Video/Voice Recording” and the frontal “Video Recording/
Shooting Indicator (Red)” will twinkle slowly, and the recording duration on LCD segment screen is displayed normally. The
video recording process only responds to operations of zoom in (“+” key)/zoom out (“-” key) function; if press “Record”
key again, the system will stop and save the current video recording file, the frontal green indicator of video recording
will be off, SD19 will return to the preview state, and the recording duration on LCD segment screen will be stopped
displaying.
Note:
a. Turn the power switch to “OFF” in video recording, the system will save the current file recorded and then shut down;
b. If the battery power is low in video recording, the system will save the current file recorded and give the message “Low Battery”
on TFT display screen until SD19 is turned off or auto enters standby mode;
c. If the memory space gets full in video recording, the system will save the current file recorded, give the message “Out of
memory” on TFT display screen, and go back to the preview mode. The video recording duration on LCD segment screen also
will be stopped displaying;
d. In cyclic recording mode, the system will auto save a file every 15 minutes .

-14-
aee.com
-15-
e. After it is fully charged, it can continuously record time is about 2.5 hours; The continuous voice recording time is about 3
hours;
f. In voice control mode, the system will start recording when the environmental voice is higher than 65dB and the green indicator
will twinkle slowly; if the environmental voice is lower than 65dB and it lasts for 2 minutes, the system will auto save the 2-minute
file recorded, the green indicator will be off, the red indicator will remain bright (the corresponding record stopping prompt
will be displayed on LCD segment screen), and it returns to the preview state;
g. To press “+” or “-” key in voice recording mode cannot execute voice increasing/reducing operation; however, to press “+” or “-” key
when recalling audio file can execute voice increasing/reducing operation;
h. Connect the machine to high-definition display device with HDMI cable in preview state, the basic operation of the machine can
be finished on the high-definition display device; however, the digital zoom function cannot be realized in 720P/960P/1080P
mode;
4. Photo shooting
You can set the image resolution before shooting photos. Press “M” key to enter the setup interface, pres “>”or “<”
key to move the cursor to “ ”, select the menu “Image Resolution”, and press “OK” key to enter the resolution
setup menu. There are three resolution modes available for your selection:
• 3M: Photo shooting resolution of 2048x1536;
• 5M: Photo shooting resolution of 2592x1944;
• 8M: Photo shooting resolution of 3200x2400;
a. Single shoot:
In preview mode, press “Shutter” once to shoot a photo with a “Click” sound, and the frontal red indicator will
twinkle once (the photo shooting icon on LCD segment screen will twinkle once) and it will return to the preview
state.
b. Tripple Shot:
Press “M” key to enter the camera setup interface, press “>”or “<” key to move the cursor to “ ”, select the menu

aee.com
-16-
-17-
“Three Photos Continuous Shooting”, and press “OK” key to confirm. Press “M” key to exit the setup interface after
setting. Press “Shutter” once at this time, and SD19 will continuously shoot three photos.
c. Continuous shoot:
Press “M” key to enter the camera setup interface, press “>” key to move the cursor to “ ”, select the menu
“Continuous Shooting”, and press “OK” key to set the continuous shooting interval time as off, 2s, 3s,5s,10s, 20s,30s.
Press “M” key to exit the setup interface after setting the interval time. Press “Shutter” at this time, and SD19 will
start shooting one photo every 2s, 3s,5s,10s, 20s,30s, till to press “Shutter” key again to stop.
d. Self Shot:
Press “M” key to enter the camera setup interface, press “>” key to move the cursor to “”, select the menu “Self-timer”,
and press “OK” key to set the delay time as 0s,5s or 10s. Press “M” key to exit the setup interface after setting the
delay time. Press “Shutter” once at this time, and SD19 will start the timer and shoot a photo at the end of the delay
time.
Note:
a. If the memory space gets full, the system will give the message 'Out of memory' (viewing on TFT display screen), and go
back to the preview mode;
b. The setting of self-timer delay time is in effective once.
5. Voice recording
Press “M” key to enter the camera setup interface, select the menu “Shoot Mode”, press “OK” key to enter the
selection interface, press “<” or “>” key to select “ ”, press “OK” key to confirm your selection, and finally press “M”
key to exit the setup interface. Press “Record” key to start recording, and the green indicator twinkles slowly, the TFT
screen displays the voice recording icon, and the timer is started.
Note: In case of re-starting or the system is waked up, it will recover to video recording mode.

-16-
aee.com
-17-
6. File recall
You can view the audio files, video files and photo files on SD19. Press “ ” key to enter the recall selection
interface and press it again to exit. Select the menu “AV File” to view the audio and video files or select the menu
“Photo File” to view the photo files. In case of many recalling files, time entering the preview interface will be
extended.
(1) AV File
Select the menu “AV File” and press “OK” key to view the recorded audio or video files. Press “-” key to enter the
thumbnail preview mode.
You can press “Menu” key to delete or protect them when viewing video or audio files.
Delete: Delete the current file;
Delete all: Delete all audio and video files under no protection;
Protect: Lock files to protect them; the icon “ ” will appear on the upper left corner of each protected file; repeat
this operation to unprotect the protected files; no operation can delete the protected files except formatting.
a. Audio file
Press “<” or “>” key to select an audio file, and to press “OK” key can play/stop it. In playing, you can press “+”key
and “-” key to adjust the volume and press “ ” key to pause/ play the file.
Note: No function of fast forward and fast rewind in audio file. In playing video/audio files, to press “OK” key can enter file preview
state; at this time, press “ ” key to exit from file recall mode.
b. Video file
When playing a video file, you can press the following keys to execute operations:
• “+”: Increase the volume;
• “-” : Reduce the volume;
• “<”: Fast rewind;