Polanik W-647 User manual

TECHNICAL SPECIFICATION
INSTRUCTION MANUAL
High jump competition landing a ea
W-647
*Stands, crossbar and platform are available separately.
File: 2016-08-04
Tec nical Support
Paweł Ciec anowski
p.ciec anowsk[email protected]

Instruction manual/tec nical specification W-647 2/6
Thank you fo pu chasing POLANIK landing a ea type W-647.
Safe assembly and use
•ATTENTION! VACCUM PACKED PRODUCT – UNPACK IMMEDIATELY AFTER DELIVERY
•Before you start to assemble and use t e landing area please read t is manual carefully and store t e manual in a
safe place for furt er reference. Polanik s all not be liable for any cage damages w ic are t e result of t e failure
to follow t is manual.
•Unaut orized copying of t is manual, in w ole or in part, is pro ibited.
•T e contents of t is manual are subject to c ange wit out notice.
•Warning! T e sports equipment produced by Polanik is designed for at letics training and use in sports
competitions only. Please pay special attention w en using t e product, misuse of at letics equipment can cause
serious injury or in extreme cases even deat . T at is w y training and use during sports events ave to be always
supervised by aut orized sports personnel. In no event s all Polanik be liable for any special, incidental, indirect or
consequential damages in connection wit t e purc ase or use of POLANIK products or costs over t e original cost
of t e product.
•Specific warranty terms:
1) T e use of t e landing area outdoors requires a waterproof cover and a landing area platform for proper
insulation from t e ground. Failure to follow t e above restrictions results in t e loss of t e warranty rig ts.
2) T e top pad of t e landing area is equipped wit a spike resistant mes fabric. T e mes fabric is designed to
protect t e landing area against spikes used by jumpers. W ile landing and walking on t e top pad t e spikes
go t roug t e mes fabric and do not damage t e surface. One must not s uffle t e spikes on t e mes
fabric, because under ig crosswise stress caused by moving t e spikes wit out lifting t e feet, it may
appen t at t e top pad will be torn. T e damages of t e top pad caused by careless sliding t e pikes on t e
top pad surface are excluded from t e warranty and can be removed in course of payable repair or
replacement of t e landing area elements.

Instruction manual/tec nical specification W-647 3/6
I. Gene al desc iption
POLANIK landing area W-647 is top quality sports equipment w ic is designed to secure jumpers and absorb impact
energy of a jumper’s landing after take off and flig t in ig jump training.
Landing A ea W-647
(Hig Jump Stand STW-02 and crossbar PW-400 available separated)
II. Technical specification
Code W-647
Dimensions lengt / widt / eig t [m] 6 / 4 / 0,7
Weig t [kg] 320 kg
Number of segments [pcs] 4
Spike resistant surface
Double sided surface element, upper and bottom surface of top pad is
equipped wit spike resistant mes fabric, attac ed using stainless D-
rings
Segment covering PVC, made of polyester wit two vinyl layers
Internal structure advanced 3-layer construction, made of ig quality PUR foam
Way of segment linking Linking belts made of jacquard webbing equipped wit self-locking
metal D-rings
Way of waterproof cover linking metal D-rings
Carrying andles very strong jacquard webbing, firmly attac ed by means of envelope
stitc ing

Instruction manual/tec nical specification W-647 4/6
III. P epa ing fo fi st use
T e landing area elements are vacuum packed only for transport. Please unpack t em immediately after delivery and
leave t em in a roofed place for few ours, so t at t ey can return to t eir original s apes. Sto ing vacuum packed
landing a ea elements may cause pe manent damages in thei inte nal st uctu es. W en t e landing area elements
return to t eir original dimensions, you can place t em in ig jump field. T e field surface s ould be even, smoot
and wit out any obstacles. If you use t e landing area outdoors, you s ould also provide: a special waterproof cover
P-647 to protect t e landing area against unfavourable weat er conditions and a modular platform SW-6x4 to insulate
t e landing area from t e ground.
IV. Assembly
It is done in 5 easy steps
place t e main segments of t e landing
area in t e ig jump facility

Instruction manual/tec nical specification W-647 5/6
using t e jacquard webbing belts and
self-locking buckles located on t e
segment sides fasten t e segments to
eac ot er,,
place t e top pad on t e landing area
main segments,,
t en fasten t e top pad to t e main
segments using D-rings
now t e landing area is ready for use.
V. Ope ating
Stepping on t e landing area and practising require special footwear designed for t ose purposes. Treading on t e
landing area in footwear wit spikes is only allowed w en t e landing area is equipped wit special spike resistant
surface. Stepping on t e landing areas in ard footwear or in s oes wit eels is strongly pro ibited. You must not
put any tables, c airs, benc es or any ot er objects w ose unit pressure exceeds 1kg/1cm2 on t e landing area. If
t e landing area is moved from one place to anot er very often, it is recommended t at a landing area cart s ould
be used.
VI. Maintenance
Due to t e ygiene requirements it is recommended t at t e landing area s ould be cleaned regularly wit
commonly available detergents. Before you start wiping t e landing area, please try to clean a small spot on its
bottom side in order to c eck t e reaction wit t e PVC fabric.
VII. Sto ing
T e landing area segments can be stored only in a orizontal position. T ey cannot be bent or pressed by any objects
during storing. T at may deform t e segments permanently. A storing facility s ould be clean and dry. It oug t to
provide min. temperature 5º C.

Instruction manual/tec nical specification W-647 6/6
VIII. IAAF Ce tificate